Mitel Voice Processing Solutions Installation And Service Manual

Page 4
3.1.
Summary of Installation
To install language prompts, you must do two things: load the prompts onto the server, and
enable the prompts. Loading the prompts is the process of copying the prompts data to a
prompts drive. The user does not have to specify which drive to load the data as the server
handles this automatically. Enabling the prompts is the process of verifying the serialized
diskette (prompts setup diskette) that permits the new prompts to run on the server. This is
done by running...

Page 5
Enter Y. This takes you to the Module Maintenance Menu.
Select (D) Disable a module:
Which module?Enter the number of the module to disable. Repeat this choice until finally
specifying the module connecting to the server console. When you do so, you are
prompted:
Warning: Disabling module 1 will result in system reboot!
Do not confirm disable if you do not want this to happen.
Type disable to confirm your request.Step 7Enter disable to disable the module.
*.The server resets. Wait for the...

Page 6
Enable the prompts. When prompted Enter one of the names : enter
add.extracost. The prompts are:Enter Y to add extra cost features, N to stop: [N]Enter Y to enable the prompts. When prompted:
Insert Extra Cost SETUP disk in the floppy drive
Enter  when ready :Insert the Prompts setup disk and press Enter.
Step 12Exit the extra-cost menu. When prompted:
Do you want to install another extra cost feature? [Y/N] :
Mla.Press Enter. You see a number of warning messages. You can ignore the ones
about...

Page 74.1.Summary of Update
To update prompts, you must load the new prompt diskette set onto the server. The updateprocedure differs from the installation procedure in that prompts do not need to be enabled.
4.2.Update InstructionsTo update prompts, follow steps 1 through 10 in section 3.2, Installation Instructions. Then
skip to step 13, and follow the rest of the procedure from that point.
5.
Related IssuesThis section covers related issues with prompts installation and update.
5.1.Numeric Prompts...

Page 85.3.Languages per Server
The maximum number of languages available on each type of Series 6 server is listed below.
1IServer Type
IMax. Number of Languages
704
12014
120s
8
64012 

Issue 1 Release 2.0 January 1996
I voiceProcessing Solutions 1
TM, @ - Trademark of M itel Corporation
0 Copyright 1996, Mite1 Corporation
All rights reserved.Printed in Canada.
IEnhanced In-band
IntegrationManual 
’ 

0 1996 Centigram Communications Corporation. All rights reserved.
This publication is protected by federal copyright law. No part of this
publication may be copied or distributed, stored in a retrieval system, or
translated into any human or computer language in any form or by any means
electronic, mechanical, magnetic, manual or otherwise, or disclosed to third
parties without the express written permission of Centigram Communications
Corporation, 91 East Tasman Drive, San Jose, CA 95134.
REPRODUCTION...

Table of Contents1 Enhanced In-band IntegrationOverview.......................................................................................................l-l
How the Integration Works..........................................................................1-2
Template Structure.......................................................................................1-4
Data...........................................................................................................l-4...

Comment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v . . . . . . . . . . .2-6
Current Template
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-6
Data
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....