Mitel Voice Processing Solutions Installation And Service Manual

DP 7011
Page 3 of 3VoiceMemo Release 5.03 and later
Step
16. Enter the error action to perform if a timeout occurs or if the data does notcompletely match any templates.
Select:(E) Error Action
pr,~q: Error Action =Response: Characters that describe the error action to perform. Table 2 at the end
of this procedure lists all valid action characters.
17. Enter a description for the template.
Select:(C) Comment
prompt: Comment =8.
Response:Characters that describe the function of the template.
18. Repeat...

Set In-band Module Numbers and Number ofTasks
do16
Page 1 of 1
VoiceMemo Release 5.03
StepThis procedure describes how to set the number of in-band tasks for each module that
has in-band integration ports.
Note:You do not need to perform this procedure on a Release 5.04 system.
1.Reach the Linegroup Only Applications menu.
2.Select the line group that you defined for your Enhanced In-band application.
3.Select Enhanced Inband to reach the Inband Integration Menu.
4.Select a module for the in-band...

DP 7022
Add or Cancel a Phoneline ExceptionPage 1 of 2
VoiceMemo Release 5.03 and laterThis procedure describes how to set any phoneline exception. Phoneline exception
changes take effect on the next new call after saving the settings. A table for convertingport numbers to line numbers follows the procedure.
Step
@D Add a Phoneline Exception
1.Reach the Phoneline Exceptions Menu.
2.Select line to change.
Select:(A) Add exception
&mpt: line to change =Response: The 
line number to change. The valid...

DP 7022
Page 2 of 2
VoiceMemo Release 5.03 and later
StepReferencePort Number to Line Number Conversion
Port
Number
OA
OB
1A
1B
2A
2B
3A
3B
4A
4B
5A
5B
GA
6B
7A
7B
8A
8B
9A
9B
1OA
10B
11A
11B
12A
12B
13A
13B
14x4
14B
15A
15BModule 1Line
Number
0
1
2
3
4
5
G
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
Module 2Line
Number
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63Module 3Line
Number
64
65
66
67
68
69
70
71
72
73
74
75
76
77...

DP 7023
Enable Conditional GreetingsPage 1 of 1VoiceMemo Release 5.03 and later
This procedure details the process for enabling conditional greetings. Conditional
greetings are used to identify, to the caller, why they have reached the 
VoiceMemosystem ( busy, no answer, etc 
). Mailbox owners perform this procedure from their own
telephone sets.Users can either keep the prerecorded greetings or record custom
greetings in their own voice.
Note:FCOS bit 161 must be enabled before mailbox owners can record...

IN?7501Create a New Enhanced In-band IntegrationPage 1 of 6
VoiceMemo Release 5.03 and later
This procedure is a short tutorial in creating your own Enhanced In-band applicationIt
leads you through the steps to create all of the templates required to integrate with an
AT&T System 25 switch.
By following the basic steps of this procedure, you can create a set of templates for
integration with any switch that can pass in-band signaling. There is a worksheet in the
back of this manual to help you plan your...

DP 7501
Page 2 of 6VoiceMemo Release 5.03 and late’r
stepReference
Select:(B) Application Description
prompt: Enter application descript
Response: AT&T System 25 Test Application
.ion
@23 Define the “Incoming Call” Template
9.Go to the Edit templates menu.
Select:(C) Edit Templates Menu
10. Set the current template to 1.
Select:(A) Current Template
Prompt: Current Template =
r,
Response: 111. Define the data that Template
ringing signal on a line.
Select:(B) Data
PwYI~~: Data =
Response: R, detect...

DP 7501
Page 3 of 6VoiceMemo Release 5.03 and later
Step
15. Enter the data to match. Template 2 handles the direct inward call-type. It is
identified by a 
“#OO#“.The call type identifier is followed by a variable-length
calling extension and two 
“#” symbols.
Select:(B) Data
Prompt.- Data =
Response: # 00# 
sx##16. Enter the action to perform when the data is received. The response for this call
type is the 
login prompt, or “Vl” greeting.
Select:(C) Action8.
Prompt: Action =
Response: Vl1.17. Enter...

DP 7501
Page 4 of 6VoiceMemo Release 5.03 and later
SteD2 1. Enter the action to be performed when the data is received. The general greeting,
or 
“V5” greeting is appropriate.
Select:(C) Action
prompt: Action =
Response: V522. Enter the time out value. The time out value for this template is
Select:(D) Timeout
Pr,~mpt: Timeout =
Response: 10 (tenths of a second)
1 second.
I23. Enter the error action to perform. The error action for this template is to hang up.
Select:(E) Error Action
prompt: Error...

DP 7501
Page 5 of 6VoiceMemo Release 5.03 and later
Step28. Enter the error action to perform. The error action for this template is to hang up.
Select:(E) Error Action
Prompt: Error Action =
Response: H
@ Define the “External Forward Call” Template29. Select the next template to edit.
Select:(A) Current Template*.
PUORZJI~: Current template =
Response: 5. .
30. Enter the data to match. This template handles external forwarded calls. The call
type identifier is 
“#03##” followed by the variable-length...