Mitel Fax Memo Manual
Here you can view all the pages of manual Mitel Fax Memo Manual. The Mitel manuals for Communications System are available online for free. You can easily download all the documents as PDF.
Page 41
r cl? 7510 Page 2 of 2 VoiceMemo Release 6.OA and later Step 7. Using the plastic loops, remove the MVIP cable. You only need to remove it from enough cards so that you can install the fax card. 8. Pick up the fax card. Hold it with the backplane connector facing away from you. 9. Insert the fax card into the alignment grooves of the card cage. 10. Slide the fax card along the grooves until the fax card backplane connector is touching the corresponding connector on the backplane. 11. Be sure...
Page 42
Remove an MMP Fax Card cl?7511 Page 1 of 2 VoiceMemo Release 6.OA and later Step This procedure describes how to remove an MVIP fax card from a Series 6 server. DANGER! Disconnect the server from its power source before connecting cables, components, or both. CAUTION! Protect your server from ESD damage during handling of all components. *, WARNING! This process requires the module to be shut down, resulting in loss of call processing capabilities. Centigram recommends that you perform...
Page 43
cl? 7511 Page 2 of 2 Vo&eMemo Release G.OA and later SteD Reference 9. Grasp the fax card firmly, and pull it straight out. 10. Place the fax card on a static bag. 11. Reconnect the MVIP cable to all appropriate cards. 12. Replace the cover on the server. 13. Restore power to the server. Doe Rcy. A
Page 44
Configuration Task list Page 1 of 1 VoiceMemo Release 6.OA and later Task Procedure FaxMemo Configuration Add FaxMemo to a Series 6 Server ...................................................... cl? 6449 Con.@ure for Fax Broadcast ............................................................... Cl’ 6453 Codgure for Fax Mail ....................................................................... CP 6450 Canfigure for Fax Publishing .............................................................. CP...
Page 45
Page 46
cl? 5007 Customize an FCOS Copy Page 1 of 2 VoiceMemo Release G.OA and later This procedure describes how to customize an FCOS by modifying a copy of an existing . _ _. FCOS. step 1. Choose the existing FCOS you wish to use as a basis for your customized FCOS. 2. Complete an FCOS Worksheet. Blank worksheets are near the back of this manual. 3. Reach the System Configuration Menu, then go to the Feature Class of Service Menu. Enter the requested information, as described in the following...
Page 47
CP 5007 Page 2 of 2 VoiceMemo Release G.OA and later Step 6. Add feature bits to the FCOS copy, as desired. Sekct: (A) Add Features prompt.- Features to add (? for help) = Response: The 1 to S-digit numbers of the feature bits to be added. l Feature bits can be entered in any of the formats shown below: A single bit, for example 208 A range of bits, for example 202-208 A series of bits, for example, 39,40,207,208 l You can mix types of entries, so you can specify all the bits necessary in bne...
Page 48
Modify or Renumber a Default FCOS Page 1 of 3 VoiceMemo Release 6.OA and later This procedure describes how to customize an FCOS by modifying one of the default FCOSs supplied by Centigram or by renumbering one of these default FCOSs. step Reference CD Modifying the Default Itself 1. Choose the default FCOS you wish to modify. 2. Complete an FCOS Worksheet. 3. Reach the System Configuration Menu, then go to the Feature Class of Service Menu. Enter the requested information, as described in the...
Page 49
CP 5008 Page 2 of 3 VoiceMemo Release G.OA and later SFP A single bit, for example 208 A range of bits, for example 202-208 A series of bits, for example, 39,40,207,208 l You can mix types of entries, so you can specify all the bits necessary in one attempt. For example, this entry is valid: 208,1-7,50,53,55,6 l Do not enter spaces after commas, and do not end the entry with a comma. 7. Delete feature bits from the default FCOS, as desired. a. Select: (D) Delete Features prompt: Features...
Page 50
CP 5008 Page3of3 VoiceMemo Release 6.OA and later step 3. Reach the System Configuration Menu, then go to the Feature Class of Service Menu. Enter the requested information, as described in the following steps, from your completed FCOS Worksheet. Note: You can quit at any point in the following steps before you exit the Feature Class of Service Menu. Quitting discards all entries you have made and leaves the FCOS settings the way they were before you reached the Feature Class of Service Menu....