Mitel Fax Memo Manual

Hardware Installation Planning 
cards and do not have direct connections to specific phone lines, any channel on a 
FaxMemo card 
can service any port on any line card in the same module. In 
addition, fax channels are allocated dynamically - once a channel completes a 
session, it is available to service another session on another port. 
See rule #2 and rule #3 for more information on assigning fax channels to voice 
ports. 
Rule #2: A fax group can be shared by more than one line group. 
A fax group (a...

Hardware Installation Planning 
Rule #4: 
Rule #5: Line groups connected to fax groups can still perForm all other 
VoiceMemo functions. 
Ports that are equipped for FaxMemo can per&m any VoiceMemo function. For 
example, the same outbound line group that delivers faxes can also make message 
delivery and paging calls. L&wise, the same line group that performs telephone 
answering functions can also receive inbound faxes. There is no need to dedicate line 
groups to perform FaxMemo functions. 
It may be...

Hardware Installation Planning 
For each fax card in each module, enter the Faxhkmo card serial number, the system 
slot number, the number of channels on the fax card, and the base I/O address (see 
Technical Reference 1904). Identify the fax group that each fax channel belongs to, 
and the line group(s) that it is connected with, and whether the fax group is 
dedicated to one line group or shared.  

Hardware Installation Planning 
FaxMemo Card Planning Worksheet 
Hardware 
Backplane 
FaxMemo Card Number of Base I/O 
Module No. 
Slot No. Serial No. Channels 
/ Address 1 
1 
15 413 0 100 
I 14 I 0 I 128 I 
2 I 15 I 6 
I 100 I 
I 2 I 14 I 512 
Confiauration 
Fax Group #: 1 
Module #: 1 Total Number of Channels: 16 
Connect with line Group(s): I Dedicated El Shared 0 
Triplet 
(module:slot:channel) 
I 1:15:0 
I 
I 1:15:1 
I 
I 1:15:2 
I 
I 1:15:3 
I 
I 1:15:5 
I 
1:15:6 
1:15:7 
Triplet...

Hardware Change Task list 
Pagelofl 
VoiceMemo Release G.OA and later 
Task 
Procedure 
FaxMemo Hardware Changes 
Replace an MVIP Fax Card 
................................................................. CP 2146 
Install an MVII? Fax Card ........................................................................ CP 7510 
Remove an MVIP Fax Card 
..................................................................... CP 7511  

cd146 
Replace an MVIP Fax Card 
Page 1 of2 
VoiceMemo Release G.OA and later 
This procedure describes how to replace an MVIP fax card in a Series 6 server. 
A 
DANGER! 
f 
Disconnect the system from its power source before connecting cables, 
components, or both. 
CAUTION! 
Protect your system from ESD damage during handling of all 
components. 
8. 
WARNING! 
This process requires the module to be shut down, resulting in loss of 
call processing capabilities. Centigram recommends that you perform 
thi...

GP 2146 
Page 2 of 2 Release G.OA and later 
SFP 
@D Remove the Fax Card 
6. Remove the cover on the system. On a Model 640, remove the front panel of the 
CPU assembly. 
7. Identify the fax card to remove. 
8. Using the plastic loops, remove the MVIP cable. You only need to remove the cable 
from enough cards so that you can access the fax card. 
9. Use a screwdriver to unfasten the bracket screw that holds the fax card to the yd cage. 
10. Grasp the fax card firmly, and pull it straight out. 
11. Place...

07510 
Install an MYIP Fax Card 
Page 1 of 2 
VoiceMemo Release 6.OA and later 
This procedure describes how to install an MVIP fax card in a Series 6 server. 
DANGER! 
Disconnect the server from irs power source before connecting cables, 
components, or both. 
CAUTION! 
Protect your server 
from ESD damage during handling of all 
components. 
WARNING! 
This process requires the module to be shut down, resulting in loss of 
call processing capabilities. Centigram recommends that you perform 
this...