Lucent Technologies Octel 100 Implementation And Service Manual

13. Setting Up the System
Implementation and Service Manual  System Setup Parameters List13-43
  Networking Parameters
 
Busy/Delay (in
Minutes)  This parameter defines the number of minutes the messaging system waits
between retries when dispatching to a remote access phone number that is
busy. This parameter applies to all outbound network messaging (OctelNet,
Administered AMIS, Casual AMIS, Network Replies).
 
 When/How to Use The default for this parameter should be sufficient on most systems....

13. Setting Up the System
Implementation and Service Manual  System Setup Parameters List13-44
 
 Min
 1
 Max
 5000
 Default
 1000
 Requires Restart
 No
 Switch-Dependent
 No
 Set by Integrator
 No
 
  NameNet Parameters
 
Maximum
Number of Idle
Days for
NameNet
Records  This parameter determines how many days the system will store idle
usage-based NameNet entries before automatically purging them.
 
 When/How to Use The default for this parameter should be sufficient, unless Maximum Number
of NameNet...

13. Setting Up the System
Implementation and Service Manual  System Setup Parameters List13-45
the extension number.
 If the fax machine is a local external phone number, enter that number.
 If the Local Fax Machine Number is a long distance number, enter the long
distance access code, followed by the area code and the phone number.
 The minimum and maximum for this parameter refer to the length of the entry
allowed in this field, not an actual value.
 
 Related Parameters/Features If Fax Mail Allowed is...

13. Setting Up the System
Implementation and Service Manual  System Setup Parameters List13-46
 
 Related Parameters/Features W hen None is selected, the following parameters are dimmed:
·  V-Tree Fax Retrieval
·  Use Im m ediate Fax Delivery in V-Trees
·  Fax Retrieval Storage Mailbox
· Fax Mail Allowed
·  Use Fax Cover Sheet
·  Number of Attempts when Sending a Fax
·  Fax Delivery Retry Delay
·  Fax Prefix Code
 
 If Set Too High Not applicable.
 
 If Set Too Low Not applicable.
 
 Min
 —
 Max
 —...

13. Setting Up the System
Implementation and Service Manual  System Setup Parameters List13-47
 
 When/How to Use Enable this parameter if you do not want the system to incur long distance
charges for delivering faxes requested by callers from a V-Tree.
 
 Related Parameters/Features W hen V-Tree Fax Retrieval is disabled, Use Im m ediate Fax Delivery Mode in
V-Trees is dimmed.
 Fax cover sheets are not sent with faxes retrieved from V-Trees when Use
Immediate Fax Delivery Mode in V-Trees is enabled....

13. Setting Up the System
Implementation and Service Manual  System Setup Parameters List13-48
 
 Related Parameters/Features If a subscriber mailbox has AutoPrint enabled on the Subscriber Settings
dialog box, faxes sent to that mailbox are printed at the local fax machine or
Personal Fax Destination defined in the Subscriber Settings dialog box as
soon as they are received.
 
 If Set Too High Not applicable.
 
 If Set Too Low Not applicable.
 
 Min
 —
 Max
 —
 Default
 No
 Requires Restart
 No...

13. Setting Up the System
Implementation and Service Manual  System Setup Parameters List13-49
  Fax Parameters
 
Fax Delivery
Retry Delay
(Minutes)  This parameter determines the number of minutes the system waits before
again attempting to send a fax after it encounters a busy or no answer at the
destination fax machine.
 
 When/How to Use For most systems, the default should be sufficient. Increase this value if the
system experiences heavy fax traffic and the outbound ports are constantly
occupied by...

13. Setting Up the System
Implementation and Service Manual  System Setup Parameters List13-50
  Fax Extensions Parameters
 
Transfer to
Extensions
(Requires
Shutdown)  This parameter determines whether the system transfers calls from a voice
port to a fax port when sending and receiving faxes.
 
 When/How to Use Enable this parameter if the messaging system must use the Transfer Method
to send and receive faxes.
 W hen you change this parameter, you must shut down the messaging
system by selecting Exit...

13. Setting Up the System
Implementation and Service Manual  System Setup Parameters List13-51
 Call Queuing Parameters (Page 12 of 26)
  The Call Queuing parameters control the number of callers allowed in holding queues for the messaging
system and the prompts v oiced to callers holding in queues. Call Queuing is only av ailable when Enable
Automated Attendant is on, and when call progress is used.
 
  Call Queuing Parameters
 
Maximum
Number of
Callers Allowed
in Queue  This parameter specifies the...

13. Setting Up the System
Implementation and Service Manual  System Setup Parameters List13-52
 
 If Set Too Low Not applicable.
 
 Min
 —
 Max
 —
 Default
 Yes
 Requires Restart
 No
 Switch-Dependent
 No
 Set by Integrator
 No
 
  See Preinstallation Configuration Worksheet
 
Call Queuing Prompts Sheet (Call Queuing Setup Options)
 
 
Call Queuing Parameters
 
Voice “Please
Hold while Call is
Transferred” 
 This parameter determines whether the system voices, “Please hold,
someone will be w ith you...