Lucent Technologies Octel 100 Implementation And Service Manual

11. Integrating with an Uninterruptible Power Supply
Implementation and Service Manual  Checking the UPS’s Current Operating State Manually11-9
Checking the UPS’s Current Operating State Manually
Use this procedure to check the current operating state of the UPS.
To check the UPS current operating state:
1.  Press  to display the W indow List.
2.  Double-click UPS Integrator. The UPS Integrator dialog box displays.
3.  From the Options menu, select Monitor. The UPS Monitor dialog box displays....

11. Integrating with an Uninterruptible Power Supply
Implementation and Service Manual  Checking the UPS’s Current Operating State Manually11-10
Notes: 

Implementation and Service Manual  Determining Outdial Strings12-1
CHAPTER 12
Determining Outdial Strings
An outbound dialing operation is any call scheduled by the messaging system for which
it must access an outbound port. For an outbound dialing operation to an outside number
to be successful, the messaging system must hav e the correct outdial string, which
consists of the applicable access codes and prefixes followed by the destination
telephone number. For the following outbound dialing operations,...

12. Determining Outdial Strings
Implementation and Service Manual  Identifying Local Area Code and Prefixes12-2
Identifying Local Area Code and Prefixes
Use this procedure to identify the local area code and associated prefixes for the
messaging system.
To identify local area code and prefixes:
1.  During installation, select DialPlan from the Installation Setup Utility dialog box. An
introductory dialog box displays.
If the messaging system is already installed, you can launch DialPlan any time by...

12. Determining Outdial Strings
Implementation and Service Manual  Deleting a Prefix12-3
4.  In the Prefix to Insert field, enter a prefix associated with the area code you defined
as the Local Area Code. Prefixes can be three, four, or six digits:
· Three-digit prefixes–Standard 3-digit prefix.
· Four-digit prefixes–Use a 4-digit prefix to define a long distance call within
the same area code. Four-digit prefixes must begin with a 1.
· Six-digit prefixes–Use a 6-digit prefix to identify a second local...

12. Determining Outdial Strings
Implementation and Service Manual  Activating Dial Plan12-4
5.  Click Delete Selected. The prefix is remov ed from the Prefix List.
6.  Repeat steps 4 and 5 for any additional prefixes you want to delete.
7.  To exit Dial Plan, click Done.
Activating Dial Plan
To activate Dial Plan:
1.  Start the messaging system, if it is not already running.
2.  Log in as a Lev el 3 system manager.
3.  From the Options menu, select System Setup. The initial System Setup window
displays....

12. Determining Outdial Strings
Implementation and Service Manual  Understanding How Dial Plan W orks12-5
Understanding How Dial Plan Works
After you configure and activ ate Dial Plan, a request to dispatch an Administered
network message or a fax retriev al request triggers a search for a match of the
destination phone number’s area code to the data you entered in Dial Plan:
1.  If the destination number’s area code (
aaa) does not match the Local Area Code
defined in Dial Plan, a match of 
aaappp is...

12. Determining Outdial Strings
Implementation and Service Manual  Understanding How Dial Plan W orks12-6
Notes: 

Implementation and Service Manual  Setting Up the System13-1
CHAPTER 13
Setting Up the System
This chapter prov ides procedures that help you:
·  Run the System Setup utility
·  Sav e the System Setup configuration
·  Search for a particular System Setup parameter
·  Configure features and functions on a system lev el 

13. Setting Up the System
Implementation and Service Manual  Running the System Setup Utility13-2
 Running the System Setup Utility
  During messaging system installation, run System Setup when you are prompted by the
Installation Setup utility. Be sure you run the Integrator utility, if the messaging system
was not preconfigured, before you run System Setup, as the Integrator presets some
parameter settings based on the switch you specify.
 
  You can run the System Setup utility after initial messaging...