Lucent Technologies Octel 100 Implementation And Service Manual

7. Setting Up the System to Recognize Voice and Fax Boards
Implementation and Service Manual Specifying Dialogic Board Settings7-11
To delete settings for an existing Dialogic D/42D-SL or D/42D-SX board:
1.  If the messaging system is running, select Exit from the File menu to shut it down.
2.  Double-click the Configure icon in the program folder. The Configure dialog box
displays.
 
3.  Under Installable Hardware, select Dialogic D4xD, then click Configure. The
Configure – Dialogic D4xD dialog box...

7. Setting Up the System to Recognize Voice and Fax Boards
Implementation and Service Manual Specifying Dialogic Board Settings7-12
10.  Restart the PC:
a.  Click the right mouse button on an empty area of the OS/2 desktop and select
Shut down from the menu that displays.
b.  W hen you are prompted whether you want to close all windows and activ e
programs, click OK.
c.  When prompted to shut down or reboot, press  to restart the
PC.
To verify the SET_UP.CFG file is set up correctly for the D/42D-SL or...

7. Setting Up the System to Recognize Voice and Fax Boards
Implementation and Service Manual Specifying Dialogic Board Settings7-13
Specifying Settings for the Dialogic D/42D-NS Boards
Use the following procedures to add, modify, or delete settings for Dialogic D/42D-NS
boards. W hen using digital boards, you must also v erify two SET_UP.CFG file
parameters if the system is configured for OctelNet or AMIS.
To specify settings for a new Dialogic D/42D-NS board:
1.  During installation, select Configure...

7. Setting Up the System to Recognize Voice and Fax Boards
Implementation and Service Manual Specifying Dialogic Board Settings7-14
4.  To identify the extensions assigned to each D/42D-NS port, click Voice Mail Port
Numbering. The Configure – D42NS Voice Mail Port Numbers dialog box displays.
 
5.  To specify the extension for port 1, enter the extension number in the corresponding
field.
6.  To identify the remaining extensions, either enter each extension number next to
each port number or, if the...

7. Setting Up the System to Recognize Voice and Fax Boards
Implementation and Service Manual Specifying Dialogic Board Settings7-15
12.  Repeat steps 9-11 for each additional D42D-NS board you installed.
13.  To sav e the settings, click OK. The Configure dialog box displays.
14.  To close Configure, click Exit.
15.  Restart the PC:
a.  Click the right mouse button on an empty area of the OS/2 desktop and select
Shut down from the menu that displays.
b.  W hen you are prompted whether you want to close...

7. Setting Up the System to Recognize Voice and Fax Boards
Implementation and Service Manual Specifying Dialogic Board Settings7-16
5.  Under Shared Memory Addresses, select the address of the board you want to
modify, then click Change. The Configure – Dialogic D4xD dialog box displays.
 
6.  In the field under Dialogic Shared Memory Addresses, enter the board’s new shared
memory address. The SW 1 diagram displays the proper jumper configuration for the
Shared Memory Address you selected. The switch...

7. Setting Up the System to Recognize Voice and Fax Boards
Implementation and Service Manual Specifying Dialogic Board Settings7-17
To delete settings for an existing Dialogic D/42D-NS board:
1.  If the messaging system is running, select Exit from the File menu to shut it down.
2.  Double-click the Configure icon in the program folder. The Configure dialog box
displays.
 
3.  Under Installable Hardware, select Dialogic D4xD, then click Configure. The
Configure – Dialogic D4xD dialog box displays.
 
4....

7. Setting Up the System to Recognize Voice and Fax Boards
Implementation and Service Manual Specifying Dialogic Board Settings7-18
10.  Restart the PC:
a.  Click the right mouse button on an empty area of the OS/2 desktop and select
Shut down from the menu that displays.
b.  W hen you are prompted whether you want to close all windows and activ e
programs, click OK.
c.  When prompted to shut down or reboot, press  to restart the
PC.
To verify the SET_UP.CFG file is set up correctly for the D/42D-NS...

7. Setting Up the System to Recognize Voice and Fax Boards
Implementation and Service Manual Specifying Brooktrout TruFax Board Settings7-19
Specifying Brooktrout TruFax Board Settings
Use the following procedure to specify Brooktrout TruFax board.
To specify Brooktrout TruFax board settings:
1.  During installation, select Configure from the Installation Setup Utility dialog box.
The Configure dialog box displays.
If the messaging system is already installed, you can launch Configure any time by...

7. Setting Up the System to Recognize Voice and Fax Boards
Implementation and Service Manual Specifying Brooktrout TruFax Board Settings7-20
5. Click TruFax IRQ – Port Address settings. The Brooktrout TruFax Interrupt – Port
Address Settings dialog box displays.
 
6.  In the Hardware Interrupt field, enter the hardware interrupt you recorded when you
configured the boards. The accompanying diagram displays the proper jumper
configuration for the interrupt you selected. If the board does not load properly...