Lucent Technologies Octel 100 Implementation And Service Manual

5. Preparing the Hardware
Implementation and Service ManualInstalling the Tape Backup Unit (Optional)5-19
5.  From the A: prompt, type INSTALL and press . You are prompted to wait
while the system loads the necessary files. Once the files are loaded, the Instructions
dialog box displays.
6.  Click Continue. The Install dialog box displays.
7.  Click OK. The Install-Directories dialog box displays.
 
8.  Under Select the components that you want to install, select BackMaster Tape
Backup Software. The...

5. Preparing the Hardware
Implementation and Service ManualInstalling the Tape Backup Unit (Optional)5-20
16.  Click OK. The OS/2 window displays.
17.  To close the OS/2 window, type EXIT then press .
18.  Remove the disk from the disk drive.
19.  Shut down the PC:
a.  Click the right mouse button on an empty area of the OS/2 desktop and select
Shut down from the menu that displays.
b.  W hen you are prompted whether you want to close all windows and activ e
programs, click OK.
c.  When prompted to shut...

5. Preparing the Hardware
Implementation and Service ManualInstalling the Tape Backup Unit (Optional)5-21
26.  Click the Parallel tab to display the Parallel page.
 
27.  Leave Transfer Speed at the default, Automatic, and click OK.
28.  Click the Unattended tab to display the Unattended page.
 
29.  Verify that the Enable Unattended box is unchecked, then click the Errors tab to
display the Errors page.
 
30.  Leave the values for Error retry count, Locked retry count, and Logfile size values at
the...

5. Preparing the Hardware
Implementation and Service ManualInstalling the Tape Backup Unit (Optional)5-22
Selecting Files for Tape Backup
The steps for selecting the directories and files that comprise an effective messaging
system backup are detailed below.
To select files for backup:
1.  Access the BackMaster main window, if it is not currently displayed.
2.  From the Backup menu, choose Selective.
3.  In the Drives field, select the letter of the drive(s) containing messaging system files.
Click OK....

5. Preparing the Hardware
Implementation and Service ManualInstalling the Tape Backup Unit (Optional)5-23
9.  Press  to close the file contents box.
10.  From the Backup menu, select Save file selections. The File Selection Set-Save As
dialog box displays.
11.  In the Save as filename field, type TAPE.FSS.
12. Click OK.
13.  If you want to run a manual backup at this time, select Start backup from the Backup
menu. If you do not want to run a backup now, select Cancel Backup from the
Backup menu, then...

5. Preparing the Hardware
Implementation and Service ManualInstalling the Tape Backup Unit (Optional)5-24
8.  To close the OS/2 editor and return to the OS/2 window, double-click the icon in the
top-left corner of the editor box.
9.  Test the TAPE.CMD file you just created by shutting down the messaging system,
then running the TAPE.CMD file by typing TAPE.CMD at the \BACKMAST prompt
and pressing . The BackMaster screen displays and the tape backup
system performs a backup. Once the backup is complete,...

5. Preparing the Hardware
Implementation and Service ManualInstalling the Tape Backup Unit (Optional)5-25
9.  To close System Setup and return to the System Manager window, select Exit from
the File menu.
10.  Log off the system by selecting Logoff from the File menu.
If a tape is not inserted into the tape backup drive, or if the tape that is inserted is not
operational (is a “bad” tape), the automated attendant/voice mail system will not restart
as it should after the system shuts down to perform daily...

5. Preparing the Hardware
Implementation and Service ManualInstalling the Tape Backup Unit (Optional)5-26
Installing the Internal Ditto Tape Backup Drive in the PC
The following procedure outlines the general steps for installing the internal Iomega Ditto
drive in the computer. The internal Ditto tape drive is preinstalled in new messaging
systems in which it is ordered. These instructions are provided for systems in which a
tape backup drive is added at a later time.
To install the internal tape backup...

5. Preparing the Hardware
Implementation and Service ManualInstalling the Tape Backup Unit (Optional)5-27
3.  Open an OS/2 window.
4.  At the command prompt, type A: and press . The A: prompt displays.
5.  From the A: prompt, type INSTALL and press . You are prompted to wait
while the system loads the necessary files. Once the files are loaded, the Instructions
dialog box displays.
6.  Click Continue. The Install dialog box displays.
7.  Click OK. The Install-Directories dialog box displays.
 
8.  Under...

5. Preparing the Hardware
Implementation and Service ManualInstalling the Tape Backup Unit (Optional)5-28
15.  Click OK. The Installation and Maintenance dialog box displays.
16.  Click OK. The OS/2 window displays.
17.  To close the OS/2 window, type EXIT then press .
18.  Remove the disk from the disk drive.
19.  Restart the PC:
a.  Click the right mouse button on an empty area of the OS/2 desktop and select
Shut down from the menu that displays.
b.  W hen you are prompted whether you want to close all...