Lucent Technologies Intuity CONVERSANT System Version 7.0 Guide

5  
Switch Interface Administration  Digital Interfaces
Intuity™ CONVERSANT® System Version 7.0 Administration 
585-313-501 Issue 3 January 2000 287
Change E1 CAS P2 - Australian DEFINITY ParametersThe E1 circuit card must first be assigned to the E1 CAS P2 - Australian 
DEFINITY protocol to use this procedure. See Assign E1 CAS P2 - Australian DEFINITY Protocol to E1 Circuit Cards
 on page 284
, for more information 
about making the initial assignment.
Note:Before attempting to make any assignment...

5  
Switch Interface Administration  Digital Interfaces
Intuity™ CONVERSANT® System Version 7.0 Administration 
585-313-501 Issue 3 January 2000 288
Figure 143. Change Parameters:  E1 CAS P2 - Australian DEFINITY Window  2  
Enter the circuit card number in the 
Card Number:
 field, or press 
F2
 
(Choices) to select from a menu. Initially, all fields are populated with the 
current values for the circuit card number entered.
3  
Change any of the parameters described in Assign E1 CAS P2 - Australian...

5  
Switch Interface Administration  Digital Interfaces
Intuity™ CONVERSANT® System Version 7.0 Administration 
585-313-501 Issue 3 January 2000 289
Display E1 CAS P2 - Australian DEFINITY ParametersThe E1 circuit card must first be assigned to the E1 CAS P2 - Australian 
DEFINITY protocol to use this procedure. See Assign E1 CAS P2 - Australian DEFINITY Protocol to E1 Circuit Cards
 on page 284
, for more information 
about making the initial assignment.
Use the following procedure to display the E1 CAS...

5  
Switch Interface Administration  Digital Interfaces
Intuity™ CONVERSANT® System Version 7.0 Administration 
585-313-501 Issue 3 January 2000 290
Figure 144. Display Parameters:  E1 CAS P2 - Australian DEFINITY Window  2  
Enter the circuit card number in the 
Card Number:
 field, or press 
F2
 
(Choices) to select from a menu.
The system displays the parameter values for the selected circuit card.
3  
Press F6 (Cancel) to return to the E1 CAS P2 - Australian DEFINITY 
menu. 

5  
Switch Interface Administration  Digital Interfaces
Intuity™ CONVERSANT® System Version 7.0 Administration 
585-313-501 Issue 3 January 2000 291
Unassign E1 CAS P2 - Australian DEFINITY Protocol to E1 Circuit Cards  Note:Before attempting to make any assignment changes to circuit 
cards, they must be in the “manoos” state. See Equipment State
 
on page 150
 in Chapter 3, 
Voice System Administration
 , for 
additional information. 

5  
Switch Interface Administration  Digital Interfaces
Intuity™ CONVERSANT® System Version 7.0 Administration 
585-313-501 Issue 3 January 2000 292
Use the following procedure to unassign the E1 CAS P2 - Australian 
DEFINITY protocol:1  
Start at the E1 CAS P2 - Australian DEFINITY menu (Figure 141 on page 283
) and select
 
The system displays the Unassign Card: E1 CAS P2 - Australian 
DEFINITY window (Figure 145 on page 292
).
Figure 145. Unassign Card:  E1 CAS P2 - Australian DEFINITY Window
2...

5  
Switch Interface Administration  Digital Interfaces
Intuity™ CONVERSANT® System Version 7.0 Administration 
585-313-501 Issue 3 January 2000 293
E1 CAS P2 - 
Australian Network 
ProtocolAccess E1 CAS P2 - Australian Network Menu
Use the following procedure to access the E1 CAS P2 - Australian Network 
protocol menu:1  
Start at the Digital Interfaces menu (Figure 129 on page 248
) and select
The system displays the E1 CAS P2 - Australian Network menu (Figure 
146 on page 293
).
Figure 146. E1 CAS P2...

5  
Switch Interface Administration  Digital Interfaces
Intuity™ CONVERSANT® System Version 7.0 Administration 
585-313-501 Issue 3 January 2000 294
Assign E1 CAS P2 - Australian Network Protocol to E1 Circuit CardsNote:Before a new protocol can be assigned to a circuit card, any 
existing protocol must first be “unassigned.” See Unassign E1 
CAS P2 - Australian Network Protocol to E1 Circuit Cards
 on page 
301
 for more information.
Before attempting to make any assignment changes to circuit 
cards,...

5  
Switch Interface Administration  Digital Interfaces
Intuity™ CONVERSANT® System Version 7.0 Administration 
585-313-501 Issue 3 January 2000 295
Figure 147. Assign Card:  E1 CAS P2 - Australian Network Window  2  
Enter the circuit card number in the 
Card Number:
 field, or press 
F2
 
(Choices) to select from a menu. Initially, all fields are populated with the 
default values for the circuit card number entered.
3  
Enter the values as shown in Table 30 on page 296
 for each of the fields 
in the...

5  
Switch Interface Administration  Digital Interfaces
Intuity™ CONVERSANT® System Version 7.0 Administration 
585-313-501 Issue 3 January 2000 296
4  
Press 
F3
 (Save).
The system saves the parameter information and assigns the E1 CAS P2 
- Australian Network protocol to the selected E1 circuit card.
Table 30. Parameter Values for Assign Card: E1 CAS P2 - Australian 
Network Window
Field Name Enter ValueFraming/Line Coding:
CEPTHDB3
Idle Code:
01010100
DTMF Muting:
Yes
A-LAW or MU-LAW:
A-LAW
CRC:
Yes...