Lucent Technologies Intuity CONVERSANT System Version 7.0 Guide

5  
Switch Interface Administration  Digital Interfaces
Intuity™ CONVERSANT® System Version 7.0 Administration 
585-313-501 Issue 3 January 2000 277
10  
Enter the cable distance, in feet, between the Channel Service Unit 
(CSU) and the voice system in the 
CSU Distance:
 field, or press 
F2
 
(Choices) to select from a menu. Valid values are 0–133, 134–266, 
267–399, 400–533, and 534–666. The default is 0–133 feet. If there is no 
CSU, the value entered in this field should be the cable distance between...

5  
Switch Interface Administration  Digital Interfaces
Intuity™ CONVERSANT® System Version 7.0 Administration 
585-313-501 Issue 3 January 2000 278
Use the following procedure to change the Line Side Galaxy parameters:1  
Start at the Line Side Galaxy menu (Figure 136 on page 271
) and select
The system displays the Change Parameters: Line Side Galaxy window 
(Figure 138 on page 278
).
Figure 138. Change Parameters:  Line Side Galaxy Window  > Change Parameters 

5  
Switch Interface Administration  Digital Interfaces
Intuity™ CONVERSANT® System Version 7.0 Administration 
585-313-501 Issue 3 January 2000 279
2  
Enter the circuit card number in the 
Card Number: 
field, or press 
F2
 
(Choices) to select from a menu. Initially, all fields are populated with the 
current values for the circuit card number entered.
3  
Change any of the parameters described in Assign Line Side Galaxy Protocol to Digital Circuit Cards
 on page 271
.
4  
Press 
F3
 (Save).
The...

5  
Switch Interface Administration  Digital Interfaces
Intuity™ CONVERSANT® System Version 7.0 Administration 
585-313-501 Issue 3 January 2000 280
Figure 139. Display Parameters:  Line Side Galaxy Window
 
 2  
Enter the circuit card number in the 
Card Number:
 field, or press 
F2
 
(Choices) to select from a menu.
3  
Press 
F6
 (Cancel) to return to the Line Side Galaxy menu. 

5  
Switch Interface Administration  Digital Interfaces
Intuity™ CONVERSANT® System Version 7.0 Administration 
585-313-501 Issue 3 January 2000 281
Unassign Line Side Galaxy Protocol to Digital Circuit Cards Note:Before attempting to make any assignment changes to circuit 
cards, they must be in the “manoos” state. See Equipment State
 
on page 150
 in Chapter 3, 
Voice System Administration
 , for 
additional information.
Use the following procedure to unassign the Line Side Galaxy protocol:
1  
Start...

5  
Switch Interface Administration  Digital Interfaces
Intuity™ CONVERSANT® System Version 7.0 Administration 
585-313-501 Issue 3 January 2000 282
Figure 140. Unassign Card:  Line Side Galaxy Window  2  
Enter the circuit card number in the 
Card Number:
 field, or press 
F2
 
(Choices) to select from a menu.
3  
Press 
F3
 (Save).
The system removes the Line Side DEFINITY assignment from the 
selected circuit card.
4  
Press 
F6
 (Cancel) repeatedly to return to the Digital Interfaces menu. 

5  
Switch Interface Administration  Digital Interfaces
Intuity™ CONVERSANT® System Version 7.0 Administration 
585-313-501 Issue 3 January 2000 283
E1 CAS P2 - 
Australian 
DEFINITY ProtocolAccess E1 CAS P2 - Australian DEFINITY Menu
Use the following procedure to access the E1 CAS P2 - Australian DEFINITY 
protocol menu:1  
Start at the Digital Interfaces menu (Figure 129 on page 248
) and select
 
The system displays the E1 CAS P2 - Australian DEFINITY menu (Figure 141 on page 283
).
Figure 141. E1...

5  
Switch Interface Administration  Digital Interfaces
Intuity™ CONVERSANT® System Version 7.0 Administration 
585-313-501 Issue 3 January 2000 284
Assign E1 CAS P2 - Australian DEFINITY Protocol to E1 Circuit CardsNote:Before a new protocol can be assigned to a circuit card, any 
existing protocol must first be “unassigned.” See Unassign E1 
CAS P2 - Australian DEFINITY Protocol to E1 Circuit Cards
 on 
page 291
 for more information.
Before attempting to make any assignment changes to circuit 
cards,...

5  
Switch Interface Administration  Digital Interfaces
Intuity™ CONVERSANT® System Version 7.0 Administration 
585-313-501 Issue 3 January 2000 285
Figure 142. Assign Card:  E1 CAS P2 - Australian DEFINITY Window  2  
Enter the circuit card number in the 
Card Number:
 field, or press 
F2
 
(Choices) to select from a menu. Initially, all fields are populated with the 
default values for the circuit card number entered.
3  
Enter the values as shown in Table 29 on page 286
 for each of the fields 
in the...

5  
Switch Interface Administration  Digital Interfaces
Intuity™ CONVERSANT® System Version 7.0 Administration 
585-313-501 Issue 3 January 2000 286
4  
Press 
F3
 (Save).
The system saves the parameter information and assigns the E1 CAS P2 
- Australian DEFINITY protocol to the selected E1 circuit card.
Table 29. Parameter Values for Assign Card: E1 CAS P2 - Australian DEFINITY 
Window
Field Name Enter ValueFraming/Line Coding:
CEPTHDB3
Idle Code:
01010100
DTMF Muting:
Yes
A-LAW or MU-LAW:
A-LAW
CRC:...