Lucent Technologies Intuity CONVERSANT System Version 7.0 Guide

5  
Switch Interface Administration  Switch Interfaces Hardware
Intuity™ CONVERSANT® System Version 7.0 Administration 
585-313-501 Issue 3 January 2000 227
Switch Interfaces Hardware
A voice system can utilize analog and digital interfaces in the same platform. 
The circuit cards that provide analog and digital interfaces have a unique card 
number (Card 1, Card 2...Card 
n) that corresponds to the card slot number.
For information about slot allocation for digital and analog interface circuit 
cards,...

5  
Switch Interface Administration  Switch Interfaces Hardware
Intuity™ CONVERSANT® System Version 7.0 Administration 
585-313-501 Issue 3 January 2000 228
•
System 25
•
Nortel Meridian M1
Advanced features for some switches (for example, message waiting lamp) 
are available with the purchase of optional switch integration packages.
To administer the analog interface, you may specify several parameters or 
accept the default values.  Default values and parameters are discussed later 
in this chapter....

5  
Switch Interface Administration  Switch Interfaces Hardware
Intuity™ CONVERSANT® System Version 7.0 Administration 
585-313-501 Issue 3 January 2000 229
Administering the digital interface consists of selecting a protocol based on 
the circuit card type (Table 23 on page 228
) and either accepting the default 
values as displayed, or changing the default values. If the default parameters 
are acceptable, you do not need to make any changes and can simply save 
the default values.Line Side on the...

5  
Switch Interface Administration  Access the Switch Interfaces Menu
Intuity™ CONVERSANT® System Version 7.0 Administration 
585-313-501 Issue 3 January 2000 230
Access the Switch Interfaces Menu
Use the following procedure to access the Switch Interfaces menu:1  
At the 
Console Login:
 prompt, enter root
The system prompts you for a password.
2  
Enter the root password.
The system displays the system prompt 
#.
3  
Enter cvis_menu
The system displays the Voice System Administration menu (Figure 42...

5  
Switch Interface Administration  Analog Interfaces
Intuity™ CONVERSANT® System Version 7.0 Administration 
585-313-501 Issue 3 January 2000 231
Figure 126. Sample Switch Interfaces Menu  The Switch Interfaces screen may offer two choices:  Analog Interfaces 
(tip/ring) and Digital Interfaces (E1/T1), depending on the circuit cards and 
software drivers installed in the system.
Analog Interfaces
Use the Analog Interfaces window to define the analog interface parameters 
between the voice system and...

5  
Switch Interface Administration  Analog Interfaces
Intuity™ CONVERSANT® System Version 7.0 Administration 
585-313-501 Issue 3 January 2000 232
Access the Analog Interfaces Window
Use the following procedure to access the Analog Interfaces window:1  
Start at the Switch Interfaces menu (Figure 126 on page 231
) and select:
The system displays the Analog Interfaces window (Figure 127).
Figure 127. Analog Interfaces Window  > Analog Interfaces 

5  
Switch Interface Administration  Analog Interfaces
Intuity™ CONVERSANT® System Version 7.0 Administration 
585-313-501 Issue 3 January 2000 233
Set Default Analog Interfaces Parameters
Use the following procedure to set the default analog switch interface 
parameters:1  
Start at the Analog Interfaces window (Figure 127 on page 232
) and 
press 
F8
 (Chg-Keys).
The system displays the alternate function keys.
2  
Press 
F1
 (Defaults). 
The system displays the PBX Defaults menu (Figure 128 on page...

5  
Switch Interface Administration  Analog Interfaces
Intuity™ CONVERSANT® System Version 7.0 Administration 
585-313-501 Issue 3 January 2000 234
3  
Select the desired switch from the menu.
The system displays the Analog Interfaces window (Figure 127 on page 232
) window showing the default values for the selected switch.
Note:If you select Other Switch/PBX/ACD, the values are the same as 
those under “AT&T System 75”.
If you select Merlin Legend, you must administer the lines 
connected to the voice...

5  
Switch Interface Administration  Analog Interfaces
Intuity™ CONVERSANT® System Version 7.0 Administration 
585-313-501 Issue 3 January 2000 235
6  
Stop and start the voice system if the current settings were modified so 
that the changes take effect. See Stop the Voice System
 on page 136
 and 
Start the Voice System
 on page 139
 in Chapter 3, 
Voice System 
Administration
 .
7  
Reinstall any scripts that use transfer sequences.
Table 24. Default Parameter Values for Analog Switch Interfaces...

5  
Switch Interface Administration  Analog Interfaces
Intuity™ CONVERSANT® System Version 7.0 Administration 
585-313-501 Issue 3 January 2000 236
Incoming 
Speech Volume
4000 dB 4000 dB 4000 dB 4000 dB 4000 dB 4000 dB
Outgoing 
Speech Volume
1000 dB 1000 dB 1000 dB 1000 dB 1000 dB 1000 dB
Outgoing Text 
Volume
*
4000 dB 4000 dB 4000 dB 4000 dB 4000 dB 4000 dB
Dial-Tone 
Training
Yes Yes Yes Yes Yes Yes
Blind Transfer 
Actions
•To Initiate 
Transfer
•To Complete 
Transfer
FW
HFW
HFW
HFW
HFW
HFW
H
Table...