Home
>
Lucent Technologies
>
Communications System
>
Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Installation And Test For Single-Carrier Cabinets Manual
Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Installation And Test For Single-Carrier Cabinets Manual
Here you can view all the pages of manual Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Installation And Test For Single-Carrier Cabinets Manual. The Lucent Technologies manuals for Communications System are available online for free. You can easily download all the documents as PDF.
Page 201
DEFINITY Enterprise Communication Server Release 8.2 Installation and Test for Single-Carrier Cabinets 555-233-120 Issue 1 April 2000 Install and Wire Telephones and Other Equipment 5-83 Add DCS Interface 5 Install Cables 1. Install c ab le from the c ab inet to a hub or Internet Protoc ol (IP) Switc h as req uired. Connec t the 259A c onnec tor to the p ort slot c ontaining the C-LAN c irc uit p ac k. See Fig ure 5-29 . For a p inout of TN799, see Ta b l e 5-25. Figure 5-29. Cable Connection...
Page 202
DEFINITY Enterprise Communication Server Release 8.2 Installation and Test for Single-Carrier Cabinets 555-233-120 Issue 1 April 2000 Install and Wire Telephones and Other Equipment 5-84 Add DCS Interface 5 Enter Added Translations 1. Get the DOSS order numb er of the upg rad e. Call the reg ional CSA to p erform the step s in this sec tion. 2. To enab le DCS, set the DCS field on the System Parameters-Customer Options form to y . 3. Ad minister the other req uired translation data using the...
Page 203
DEFINITY Enterprise Communication Server Release 8.2 Installation and Test for Single-Carrier Cabinets 555-233-120 Issue 1 April 2000 Install and Wire Telephones and Other Equipment 5-85 Add ISDN — PRI 5 Add ISDN — PRI North American 1. Use a TN767E (or later) DS1 or a TN464F DS1/E1 c irc uit p ac k for a sig naling link and up to 23 ISDN — PRI Trunk Group members. 2. Install a Tone-Cloc k c irc uit p ac k to p rovid e sync hronization for the DS1 circuit pack. 3. If using a TN464F, then p ac...
Page 204
DEFINITY Enterprise Communication Server Release 8.2 Installation and Test for Single-Carrier Cabinets 555-233-120 Issue 1 April 2000 Install and Wire Telephones and Other Equipment 5-86 Add ISDN — PRI 5 Add Circuit Packs 1. Determine port assig nment of c irc uit p ac ks to be ad d ed . 2. Install the DS1 Interfac e c irc uit p ac k in the assig ned c arrier slot. 3. Install a TN748B (or later) (or the international TN420B/C) Tone Detec tor circuit pack if required. Install Cables 1. Install c ab...
Page 205
DEFINITY Enterprise Communication Server Release 8.2 Installation and Test for Single-Carrier Cabinets 555-233-120 Issue 1 April 2000 Install and Wire Telephones and Other Equipment 5-87 Add Packet Bus Support to R8si 5 Add Packet Bus Support to R8si Standard Reliability R8si System Service Interruption Installing TN570 Exp ansion Interfac e c irc uit pac ks as part of ad d ing p ac ket b us sup p ort req uires a servic e interrup tion. Notify the c ustomer in ad vanc e as to when the ad d ition...
Page 206
DEFINITY Enterprise Communication Server Release 8.2 Installation and Test for Single-Carrier Cabinets 555-233-120 Issue 1 April 2000 Install and Wire Telephones and Other Equipment 5-88 Add Packet Bus Support to R8si 5 Power Down Cabinet 1. At the PPN, set the main c irc uit b reaker to OFF. 2. At an EPN, set the main c irc uit b reaker to OFF. Install Circuit Packs 1. Install the ap p rop riate c irc uit pac ks. See Tab le 5-26. Power Up System 1. At the EPN, set the main c irc uit b reaker to...
Page 207
DEFINITY Enterprise Communication Server Release 8.2 Installation and Test for Single-Carrier Cabinets 555-233-120 Issue 1 April 2000 Install and Wire Telephones and Other Equipment 5-89 Add Packet Bus Support to R8si 5 Enable Customer Options and Alarm Origination 1. Get the DOSS order numb er of the upg rad e and c all the reg ional CSA to p erform the step s in this sec tion. 2. To use Ac cess Security Gateway (ASG), see Appendix D, ‘‘Access Sec urity Gateway’’. 3. Type change system-parameters...
Page 208
DEFINITY Enterprise Communication Server Release 8.2 Installation and Test for Single-Carrier Cabinets 555-233-120 Issue 1 April 2000 Install and Wire Telephones and Other Equipment 5-90 Add Packet Bus Support to R8si 5 High or Critical Reliability R8si System Service Interruption If no TN570 Exp ansion Interfac e c irc uit p ac ks need to b e installed for PktBus sup p ort, skip to and p erform only the Install Circ uit Pac ks sec tion. This p roc ed ure d oes not interrup t servic e in this c...
Page 209
DEFINITY Enterprise Communication Server Release 8.2 Installation and Test for Single-Carrier Cabinets 555-233-120 Issue 1 April 2000 Install and Wire Telephones and Other Equipment 5-91 Add Packet Bus Support to R8si 5 Install Circuit Packs 1. Install the ap p rop riate c irc uit pac ks. See Tab le 5-27. Power Up System 1. At the EPN, set the main c irc uit b reaker to ON. 2. At the PPN, set the main c irc uit b reaker to ON. 3. The system p erforms a level 4 reb oot, load ing the system...
Page 210
DEFINITY Enterprise Communication Server Release 8.2 Installation and Test for Single-Carrier Cabinets 555-233-120 Issue 1 April 2000 Install and Wire Telephones and Other Equipment 5-92 Add Packet Bus Support to R8si 5 Enable Customer Options and Alarm Origination 1. Get the DOSS order numb er of the upg rad e. Call the reg ional CSA to p erform the step s in this sec tion. 2. To use Ac cess Security Gateway (ASG), see Appendix D, ‘‘Access Sec urity Gateway’’. 3. Type change system-parameters...