Home
>
Lucent Technologies
>
Communications System
>
Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Installation And Test For Single-Carrier Cabinets Manual
Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Installation And Test For Single-Carrier Cabinets Manual
Here you can view all the pages of manual Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Installation And Test For Single-Carrier Cabinets Manual. The Lucent Technologies manuals for Communications System are available online for free. You can easily download all the documents as PDF.
Page 221
DEFINITY Enterprise Communication Server Release 8.2 Installation and Test for Single-Carrier Cabinets 555-233-120 Issue 1 April 2000 Install and Wire Telephones and Other Equipment 5-103 Add IP Interface Assembly 5 2. Insert the TN802B IP Interfac e into the rig ht most of the three slots you reserved for it (see Fig ure 5-33 ) and seat it p rop erly. When you p lug in the TN802B IP Interfac e Assemb ly, the c irc uit p ac k starts to b oot and the LCD read s PC Boot . The c irc uit p ac k...
Page 222
DEFINITY Enterprise Communication Server Release 8.2 Installation and Test for Single-Carrier Cabinets 555-233-120 Issue 1 April 2000 Install and Wire Telephones and Other Equipment 5-104 Add IP Interface Assembly 5 Administer the TN799B C-LAN Refer to the DEFINITY Enterp rise Communic ations Server Ad ministration for Network Connec tivity . Administer the IP Interface Ad ministration is usually d one remotely; c all your servic e rep resentative to start the process. Administration Steps NOTE:...
Page 223
DEFINITY Enterprise Communication Server Release 8.2 Installation and Test for Single-Carrier Cabinets 555-233-120 Issue 1 April 2000 Install and Wire Telephones and Other Equipment 5-105 Add IP Interface Assembly 5 . 6. If not, typ e MEDPRO in the slot just ab ove TN802B slot and p ress En t e r. Chang ing the one entry automatic ally c hang es the entry ab ove it. If it is in IP Trunk mod e, you g et the following error messag e: MedPro type requires TN802 with application. Type MEDPRO on...
Page 224
DEFINITY Enterprise Communication Server Release 8.2 Installation and Test for Single-Carrier Cabinets 555-233-120 Issue 1 April 2000 Install and Wire Telephones and Other Equipment 5-106 Add IP Interface Assembly 5 . Test the External Connection to the LAN To test the external IP c onnec tions, p ing the IP Interfac e server, and p ing a known c omp uter c onnec ted to your network. If everything is c onfig ured c orrec tly, the Result c olumn on the Ping Results sc reen read s pass . If it...
Page 225
DEFINITY Enterprise Communication Server Release 8.2 Installation and Test for Single-Carrier Cabinets 555-233-120 Issue 1 April 2000 Install and Wire Telephones and Other Equipment 5-107 Add IP Interface Assembly 5 3. Type ping ip-address nnn.nnn.nnn.nnn board UUCSS and p ress En t e r. Th e v a r i a b l e nnn.nnn.nnn.nnn is the IP ad d ress of another c omp uter b eyond the g ateway and UUCSS is the c ab inet, c arrier, and slot of the TN802B IP Interfac e. The TN802B IP Interfac e is...
Page 226
DEFINITY Enterprise Communication Server Release 8.2 Installation and Test for Single-Carrier Cabinets 555-233-120 Issue 1 April 2000 Install and Wire Telephones and Other Equipment 5-108 Add IP Interface Assembly 5 Check your Shipment When your DEFINITY IP Trunk ord er arrives at the c ustomer’s site, c hec k the c ontents (see Tab le 5-30 ). 1. Insp ec t the ship p ing c arton for d amag e b efore op ening it. If the b ox is damaged, do not open it. Inform the ship p ing c omp any, and ask...
Page 227
DEFINITY Enterprise Communication Server Release 8.2 Installation and Test for Single-Carrier Cabinets 555-233-120 Issue 1 April 2000 Install and Wire Telephones and Other Equipment 5-109 Add IP Interface Assembly 5 Figure 5-34. TN802B IP Interface External Cable Assembly 3. Read and follow any d irec tions inserted into the p ac kag e b y the fac tory. Connect the Cables 1. Determine into whic h p ort slot you are p utting the TN802B IP Interfac e. NOTE: Make sure that at least 3 ad joining...
Page 228
DEFINITY Enterprise Communication Server Release 8.2 Installation and Test for Single-Carrier Cabinets 555-233-120 Issue 1 April 2000 Install and Wire Telephones and Other Equipment 5-110 Add IP Interface Assembly 5 Connect the Modem NOTE: These instruc tions are for c onnec ting the U.S. Rob otic s modem sup p lied to U.S. c ustomers only. If using a d ifferent mod em, follow the manufac turer’s instruc tions on c onnec ting the mod em. 1. Connec t the RS232 p ort of the mod em to the MODEM c...
Page 229
DEFINITY Enterprise Communication Server Release 8.2 Installation and Test for Single-Carrier Cabinets 555-233-120 Issue 1 April 2000 Install and Wire Telephones and Other Equipment 5-111 Add IP Interface Assembly 5 Connect the Monitor, Keyboard, and Mouse NOTE: Only make these c onnec tions if ad ministered loc ally. Not nec essary if ad ministered remotely. You must c onnec t these b efore inserting the TN802B IP Interfac e. 1. Attac h a VGA monitor to the VGA c onnec tor of the TN802B IP...
Page 230
DEFINITY Enterprise Communication Server Release 8.2 Installation and Test for Single-Carrier Cabinets 555-233-120 Issue 1 April 2000 Install and Wire Telephones and Other Equipment 5-112 Add IP Interface Assembly 5 Connect the Ethernet 1. Connec t the network c ab le to the ETHERNET c onnec tor on the TN802B external c ab le assemb ly. NOTE: You need a CAT5 or better c ab le for 100-Mb yte operation. Install the Circuit Pack !CAUTION: When add ing or rep lac ing any hard ware, b e sure to g...