Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Installation And Test For Single-Carrier Cabinets Manual

Option Switch Settings 
A-1 Data Module Option Switch Settings 
A
DEFINITY Enterprise Communication Server Release 8.2
Installation and Test for Single-Carrier Cabinets  555-233-120  Issue 1
April 2000
A
Option Switch Settings
Some of the interfac e units used  b etween the system and other typ es of 
eq uip ment require spec ific  op tion switc h settings for eac h ap p lic ation. This 
sec tion lists the setting s req uired for d ata mod ules, mod ems, printers, and  so 
forth. Refer to the user’s g...

DEFINITY Enterprise Communication Server Release 8.2
Installation and Test for Single-Carrier Cabinets  555-233-120  Issue 1
April 2000
Option Switch Settings 
A-2 Data Module Option Switch Settings 
A
Figure A-1. DIP Switch Locations
1. Remove the top  c over from the data mod ule. Refer to Chap ter 5, ‘‘Install 
and  Wire Telep hones and  Other Eq uip ment’’.
2. Switc hes 1, 5, and 8 are the only switches to be set. Refer to Ta b l e  A - 1
 for 
the op tion switc h settings. 
Figure Notes
1. Data Mod...

DEFINITY Enterprise Communication Server Release 8.2
Installation and Test for Single-Carrier Cabinets  555-233-120  Issue 1
April 2000
Option Switch Settings 
A-3 7400D Data Module Option Settings 
A
7400D Data Module Option Settings
The op tion setting s shown in Ta b l e  A - 2 are for the Answer Only interfac e and  are 
set from the front panel interfac e. Set only the d esired  sp eed  of the 7400D. All 
other d efault settings c an b e used .
Refer to “ Set 7400 D”  Op tions on p ag e B-4 to set...

DEFINITY Enterprise Communication Server Release 8.2
Installation and Test for Single-Carrier Cabinets  555-233-120  Issue 1
April 2000
Option Switch Settings 
A-4 7400D Data Module Option Settings 
A
Set 7400D Options
The following step s are an examp le of how to c hang e the d efault setting  of 9600 
to the c ustom setting  of 19200.
NOTE:
If the link is b etween a Release 8r and  a CMS, set the 7400D to 19200. If 
the link is b etween any other system and  a CMS, leave the sp eed  of the 
7400D set...

DEFINITY Enterprise Communication Server Release 8.2
Installation and Test for Single-Carrier Cabinets  555-233-120  Issue 1
April 2000
Option Switch Settings 
A-5 Add Pooled Modem 
A
Add Pooled Modem
Mod em Pooling  sup p orts 2 types of c onversion resourc es: integrated  and  
combined. 
The integrated type requires a TN758 Pooled Modem circuit pack for each 2 
c onversion resourc es p rovid ed.
The c omb ined  typ e requires a p ort on a TN754B Dig ital Line c irc uit p ac k and  a 
p ort on either...

DEFINITY Enterprise Communication Server Release 8.2
Installation and Test for Single-Carrier Cabinets  555-233-120  Issue 1
April 2000
Option Switch Settings 
A-6 Add Pooled Modem 
A
Settings for Modem Connected to Data Module
1. Type add data-module next
 and press En t e r.
2. Type pdm
 in the Type
 field .
3. Type x
 in the Port
 field.
4. Type dte
 in the Connected to
 field and press 
En te r.
5. Type add station next
 and press 
En t e r.
6. Type 2500
 in the Type
 field.
7. Type x
 in the Port...

DEFINITY Enterprise Communication Server Release 8.2
Installation and Test for Single-Carrier Cabinets  555-233-120  Issue 1
April 2000
Option Switch Settings 
A-7 Add Pooled Modem 
A
7400A and 7400B Option Settings
Determine if the 7400A or 7400B will b e interfac ing with D-lead  modems or 
attention c ontrol mod ems. Use Ta b l e  A - 3
 to interfac e with either modem. You c an 
set op tions for the 7400B throug h a d umb  terminal. 
NOTE:
1. Set sp eed  to matc h remote mod em. At least one sp eed...

DEFINITY Enterprise Communication Server Release 8.2
Installation and Test for Single-Carrier Cabinets  555-233-120  Issue 1
April 2000
Option Switch Settings 
A-8 Printer Option Settings 
A
Printer Option Settings
Printers c an b e used  with a manag ement terminal as journal p rinters for the 
hosp itality feature and  also as an outp ut devic e for Call Detail Rec ord ing  (CDR). 
A 572 printer c an func tion as a CDR d evic e, system p rinter, or journal p rinter. 
The op tions are set with func tion...

DEFINITY Enterprise Communication Server Release 8.2
Installation and Test for Single-Carrier Cabinets  555-233-120  Issue 1
April 2000
Option Switch Settings 
A-9 Printer Option Settings 
A
Table A-4. 572 Printer Used with Management Terminal 
Function Function Name Menu Menu Status
01 FORM LENGTH 09 11
02 LPI 01 6
03 CPI 01 10
04 LQ or NLQ 01 LQ
05 BUZZER 01 ON
06 FONT 02 FONTCART
07 RESOLUTION 01 144
1 1 B U FFER 0 2 N - L I N E
13 PW ON MODE 01 ON-LINE
14 DIRECTION 01 B1-DIR.1
15 BUFF FULL 02 LF +...

DEFINITY Enterprise Communication Server Release 8.2
Installation and Test for Single-Carrier Cabinets  555-233-120  Issue 1
April 2000
Option Switch Settings 
A-10 Printer Option Settings 
A
Table A-5. 572 Printer used as System Printer 
Function Function Name Menu Menu Status
01 FORM LENGTH 09 11
02 LPI 01 6
03 CPI 01 10
04 LQ or NLQ 01 LQ
05 BUZZER 01 ON
06 FONT 02 FONTCART
07 RESOLUTION 01 144
11 BUFFER 02 N-LINE
13 PW ON MODE 01 ON-LINE
14 DIRECTION 01 B1-DIR.1
15 BUFF FULL 02 LF +  CR
16 P.E. 01...