Home > Lucent Technologies > Communications System > Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Installation And Test For Single-Carrier Cabinets Manual

Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Installation And Test For Single-Carrier Cabinets Manual

Here you can view all the pages of manual Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Installation And Test For Single-Carrier Cabinets Manual. The Lucent Technologies manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 231

DEFINITY Enterprise Communication Server Release 8.2
Installation and Test for Single-Carrier Cabinets  555-233-120  Issue 1
April 2000
Install and Wire Telephones and Other Equipment 
5-113 Add IP Interface Assembly 
5
Figure 5-36. TN802B IP Interface faceplate
NOTE:
To p rop erly seat the c irc uit p ac k, p ush firmly on the front of the fac ep late 
until the latc h reac hes the b ottom rail of the c arrier. Then c lose the latc h 
until it is fully eng ag ed .
1. Insert the TN802B IP Interfac e into...

Page 232

DEFINITY Enterprise Communication Server Release 8.2
Installation and Test for Single-Carrier Cabinets  555-233-120  Issue 1
April 2000
Install and Wire Telephones and Other Equipment 
5-114 Add IP Interface Assembly 
5
Figure 5-37. J58890MA-1 L30 IP Interface Assembly
Test the Modem
1. Check for dial tone.
2. Contac t Luc ent Tec hnolog ies Customer Sup p ort and  ask a rep resentative 
to d ial into your IP Interfac e server. 
Administer the IP Interface
Ad minstration is d one either loc ally or...

Page 233

DEFINITY Enterprise Communication Server Release 8.2
Installation and Test for Single-Carrier Cabinets  555-233-120  Issue 1
April 2000
Install and Wire Telephones and Other Equipment 
5-115 Add IP Interface Assembly 
5
Administration Steps
1. Log in as craft
.
2. Type change circuit-pack
 and  p ress 
En te r.
3. Chec k the Cod e c olumn to see if the slots ab ove the TN802B say 
DSMAPD or MEDPRO.
.
4. If MEDPRO, g o to the entry just ab ove the TN802B that says MEDPRO.
5. Type DSMAPD, and press 
En te...

Page 234

DEFINITY Enterprise Communication Server Release 8.2
Installation and Test for Single-Carrier Cabinets  555-233-120  Issue 1
April 2000
Install and Wire Telephones and Other Equipment 
5-116 Add IP Interface Assembly 
5
If administered  loc ally on a monitor, keyb oard, and  mouse:
1. Press 
CTRL, ALT, and  DEL simultaneously.
2. Type administrator
 in the User Name
 field .
3. Type iptrunk
 in the Password
 field  and  c lic k OK
. 
4. After log g ing  on for the first time, c hang e the ad ministrator...

Page 235

DEFINITY Enterprise Communication Server Release 8.2
Installation and Test for Single-Carrier Cabinets  555-233-120  Issue 1
April 2000
Install and Wire Telephones and Other Equipment 
5-117 Add IP Interface Assembly 
5
Assign Server and Domain Names
The Windows NT server identifies servers using a server name plus a domain 
name that loc ates the named  server in a p artic ular p art of the network. The 
TN802B IP Interfac e is ship p ed  with generic  server and  d omain names. Assig n 
rep lac ement...

Page 236

DEFINITY Enterprise Communication Server Release 8.2
Installation and Test for Single-Carrier Cabinets  555-233-120  Issue 1
April 2000
Install and Wire Telephones and Other Equipment 
5-118 Add IP Interface Assembly 
5
5. Verify that the Adapter
 drop  d own menu lists 2 DEC Ethernet ad ap ters.
!CAUTION:
Do not c hange any setting s on the ad ap ter lab eled  [ 1]  for any 
reason.
6. Selec t the DEC Ethernet ad ap ter lab eled  [ 2] . 

Page 237

DEFINITY Enterprise Communication Server Release 8.2
Installation and Test for Single-Carrier Cabinets  555-233-120  Issue 1
April 2000
Install and Wire Telephones and Other Equipment 
5-119 Add IP Interface Assembly 
5
7. Typ e a valid  IP ad d ress for the IP Interfac e server in the IP Address:
 
field .
8. Typ e the ap p rop riate sub net mask in the Subnet Mask:
 field. 
NOTE:
Not all networks req uire step s 9 throug h 18. Chec k with the loc al 
network ad ministrator to determine whic h are req...

Page 238

DEFINITY Enterprise Communication Server Release 8.2
Installation and Test for Single-Carrier Cabinets  555-233-120  Issue 1
April 2000
Install and Wire Telephones and Other Equipment 
5-120 Add IP Interface Assembly 
5
11. Typ e d omain name in the Domain
 field .
12. If using  DNS, c lic k 
Add  under the DNS Service Search Order
 field  and 
type its IP ad d ress.
13. Clic k on the WINS Ad dress tab . 

Page 239

DEFINITY Enterprise Communication Server Release 8.2
Installation and Test for Single-Carrier Cabinets  555-233-120  Issue 1
April 2000
Install and Wire Telephones and Other Equipment 
5-121 Add IP Interface Assembly 
5
14. Make sure the [ 2]  DEC shows in the Adapter
 field.
15. If WINS server is availab le, typ e its IP ad d ress in the Primary WINS 
Server
 field .
16. If DNS is availab le, selec t Enable DNS for Windows Resolution
.
17. If the network uses an imp orted LMHOSTS file, selec t Enable...

Page 240

DEFINITY Enterprise Communication Server Release 8.2
Installation and Test for Single-Carrier Cabinets  555-233-120  Issue 1
April 2000
Install and Wire Telephones and Other Equipment 
5-122 Add IP Interface Assembly 
5
If administered  remotely throug h p c ANYWHERE:
21. Clic k on the p c ANYWHERE Restart Host Comp uter b utton on the toolb ar 
to restart the c omputer.
If administered  loc ally on a monitor, keyb oard, and  mouse:
21. Clic k Ye s
 in the d ialog  b ox to restart the c omp uter....
Start reading Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Installation And Test For Single-Carrier Cabinets Manual

Related Manuals for Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Installation And Test For Single-Carrier Cabinets Manual

All Lucent Technologies manuals