Lucent Technologies DEFINITY Enterprise Communications Server Release 8.2 Installation And Test For Single-Carrier Cabinets Manual

DEFINITY Enterprise Communication Server Release 8.2
Installation and Test for Single-Carrier Cabinets  555-233-120  Issue 1
April 2000
Install and Wire Telephones and Other Equipment 
5-93 Add CallVisor ASAI 
5
Add CallVisor ASAI
Service Interruption
1. If ad d ing  the pac ket b us sup p ort and  TN570s must b e installed  as part of 
that sup p ort, then ad d ing  CallVisor ASAI req uires a servic e interrup tion. 
Notify the c ustomer in ad vanc e as to when the ad d ition will take p lac e. 
See...

DEFINITY Enterprise Communication Server Release 8.2
Installation and Test for Single-Carrier Cabinets  555-233-120  Issue 1
April 2000
Install and Wire Telephones and Other Equipment 
5-94 Add CallVisor ASAI 
5
Add Circuit Packs
1. Determine port assig nment of c irc uit p ac ks to be ad d ed .
2. Install the ap p rop riate c irc uit pac ks in assigned  c ab inet slot (as req uired ).
The TN748B (or later) or TN744/C/D Call Classifier c irc uit p ac k is req uired . 
The TN744 is req uired  for those c...

DEFINITY Enterprise Communication Server Release 8.2
Installation and Test for Single-Carrier Cabinets  555-233-120  Issue 1
April 2000
Install and Wire Telephones and Other Equipment 
5-95 Add ISDN—BRI 
5
Add ISDN—BRI
Service Interruption
1. If ad d ing  the pac ket b us sup p ort and  TN570s must b e installed  as part of 
that sup p ort, ad d ing ISDN—BRI req uires a servic e interrup tion. Notify the 
c ustomer in ad vanc e as to when the ad d ition will b e c arried  out. See ‘‘Add 
Packet Bus...

DEFINITY Enterprise Communication Server Release 8.2
Installation and Test for Single-Carrier Cabinets  555-233-120  Issue 1
April 2000
Install and Wire Telephones and Other Equipment 
5-96 Add IP Interface Assembly 
5
Enter Added Translations
1. Ad minister the req uired  translation d ata using the forms listed und er 
7500D voic e terminals and  8500 voic e terminals in 
DEFINITY Enterp rise 
Communic ations Server Release 8 Ad ministrator’s Guid e
.
Resolve Alarms
1. Examine the alarm log . Resolve...

DEFINITY Enterprise Communication Server Release 8.2
Installation and Test for Single-Carrier Cabinets  555-233-120  Issue 1
April 2000
Install and Wire Telephones and Other Equipment 
5-97 Add IP Interface Assembly 
5
The following sec tions d esc rib e the proc ess for
nInstalling  in Med ia Proc essor Mod e
nInstalling  in IP Trunk Mod e
nUp g rad ing  a TN802 V3 (or later) to a TN802B (Med Pro mod e)
!WARNING:
When c onnec ted  remotely via p c ANYWHERE, only use the p c ANYWHERE 
Restart Host...

DEFINITY Enterprise Communication Server Release 8.2
Installation and Test for Single-Carrier Cabinets  555-233-120  Issue 1
April 2000
Install and Wire Telephones and Other Equipment 
5-98 Add IP Interface Assembly 
5
In ad dition if non-U.S. c ustomer:
nMod em c omp arab le to a U.S. Rob otic s Sportster Mod el USR 33.6 EXT.
nCable from modem to TN802B external c able assembly.
We rec ommend  that you p rotec t your c ab inet with an uninterrup tib le power 
system (UPS).
Check your Shipment
When your...

DEFINITY Enterprise Communication Server Release 8.2
Installation and Test for Single-Carrier Cabinets  555-233-120  Issue 1
April 2000
Install and Wire Telephones and Other Equipment 
5-99 Add IP Interface Assembly 
5
Figure 5-30. TN802B IP Interface External Cable Assembly
Connect the Cables
1. Determine into whic h p ort slots you are p utting the TN799B C-LAN and  
TN802B IP Interfac e c irc uit p ac ks.
NOTE:
Make sure that at least 3 ad jac ent slots are free for the TN802B.
From the rear of the c...

DEFINITY Enterprise Communication Server Release 8.2
Installation and Test for Single-Carrier Cabinets  555-233-120  Issue 1
April 2000
Install and Wire Telephones and Other Equipment 
5-100 Add IP Interface Assembly 
5
Connect the Modem
NOTE:
These instruc tions are for c onnec ting  the U.S. Rob otic s modem sup p lied  to 
U.S. c ustomers only. If using  a d ifferent mod em, follow the manufac turer’s 
instruc tions on c onnec ting  the mod em.
1. Connec t the RS232 p ort of the mod em to the MODEM c...

DEFINITY Enterprise Communication Server Release 8.2
Installation and Test for Single-Carrier Cabinets  555-233-120  Issue 1
April 2000
Install and Wire Telephones and Other Equipment 
5-101 Add IP Interface Assembly 
5
Connect the Ethernet
1. Connec t the network c ab le to the ETHERNET c onnec tor on the TN802B 
external c ab le assemb ly.
NOTE:
You need  a CAT5 or better c ab le for 100-Mb yte operation.
Install the Circuit Packs
!CAUTION:
When add ing  or rep lac ing  any hard ware, b e sure to g...

DEFINITY Enterprise Communication Server Release 8.2
Installation and Test for Single-Carrier Cabinets  555-233-120  Issue 1
April 2000
Install and Wire Telephones and Other Equipment 
5-102 Add IP Interface Assembly 
5
Figure 5-32. TN802B IP Interface faceplate
NOTE:
If rep lac ing  the existing  TN799 c irc uit p ac k, remove it first and rep lac e it 
with the new one.
1. Insert the TN799B c irc uit p ac k into the p ort slot id entified  earlier.
NOTE:
To p rop erly seat the c irc uit p ac k, p ush...