Lucent Technologies DEFINITY Enterprise Communication Server Release 8.2 Installation And Test For Multi-Carrier Cabinets Manual

DEFINITY ECS Release 8.2 Installation and Test
for Multi-Carrier Cabinets  555-233-114  Issue 1
April 2000
Install Telecommunications Cabling 
2-25 Cable Installation 
2
Install Connector Cables Between Auxiliary 
Cabinet and MDF
Auxiliary eq uip ment that c onnec ts to the MDF c an b e mounted  insid e the 
Auxiliary c ab inet. The equip ment c onnec ts to an ED-1E1443-10 (Group  1) 
intrac onnec tion p anel mounted  in the c ab inet. This intrac onnec tion p anel 
c onsists of a 110-typ e 100-p air...

DEFINITY ECS Release 8.2 Installation and Test
for Multi-Carrier Cabinets  555-233-114  Issue 1
April 2000
Install Telecommunications Cabling 
2-26 Install Coupled Bonding Conductor 
2
Install Coupled Bonding Conductor 
The Coupled  Bonding  Cond uc tor (CBC) c onnec ts to the sing le-point g round  
b loc k and  runs ad jac ent to p airs in an assoc iated  telec ommunic ations c ab le. 
See Fig ure 2-15
. The mutual c oup ling  b etween the CBC and the wire p airs 
red uc es p otential differenc es in...

DEFINITY ECS Release 8.2 Installation and Test
for Multi-Carrier Cabinets  555-233-114  Issue 1
April 2000
Install Telecommunications Cabling 
2-27 Install Coupled Bonding Conductor 
2
Figure 2-15. Coupled Bonding Conductor Figure Notes:
1. 25-Pair Tip & Ring Cables to 
Cab inets
2. Coupled Bonding Conductor (CBC) 
Terminal Bloc k
3. Tie Wraps
4 . C a b l e  Sh i e l d  o r  Six  Sp a re  Pa ir s
5. Ground  on Carb on Bloc k Protec tor 
or Eq uivalent
6. Trunk Cab le to Network Interfac e
7. 10 AWG (#25)...

DEFINITY ECS Release 8.2 Installation and Test
for Multi-Carrier Cabinets  555-233-114  Issue 1
April 2000
Install Telecommunications Cabling 
2-28 Station Wiring Design 
2
Station Wiring Design
The following hardware and cabling is used:
nInformation outlets (mod ular wall jac ks)
nStation Cab les
nClosets
— Site loc ations
— Satellite loc ations
nAd ap ters
nLab els
A b rief d esc rip tion of eac h of the ab ove listed  items follows. Ord ering  information 
is not p rovided  for station c ab les and...

DEFINITY ECS Release 8.2 Installation and Test
for Multi-Carrier Cabinets  555-233-114  Issue 1
April 2000
Install Telecommunications Cabling 
2-29 Station Wiring Design 
2
Sing le mod ular p lug-end ed  4-p air station c ab le — Use this c ab le b etween 
ad ap ters and  information outlets that req uire p ush-on c onnec tions. It c an also b e 
used  when 4-p air station c ab les are field - terminated  on the 110-typ e terminal 
b loc ks in the eq uip ment room or satellite c loset and  mod ularly c...

DEFINITY ECS Release 8.2 Installation and Test
for Multi-Carrier Cabinets  555-233-114  Issue 1
April 2000
Install Telecommunications Cabling 
2-30 Station Wiring Design 
2
Figure 2-16. Example of Extending 4-Pair Station Cables
Closets
Site Locations
Site loc ations are c losets that p rovid e a p oint in the station wiring  for the 
ad ministration of remote p owering. Ad apters are used  at site loc ations to 
terminate the 25-p air station c ables and  p rovid e c onnec tion p oints (mod ular 
jac...

DEFINITY ECS Release 8.2 Installation and Test
for Multi-Carrier Cabinets  555-233-114  Issue 1
April 2000
Install Telecommunications Cabling 
2-31 Station Wiring Design 
2
Figure 2-17. 258A and BR2580A Adapters
The 356A ad apter plug s into a 25-pair female c ab le c onnec tor. See Fig ure 2-18
. 
The 356A ad ap ter d ivid es the 25-p air c ab le into eig ht 3-p air c irc uits. Althoug h 
the c irc uits are 3-p air, the ad ap ters mod ular jac ks will ac c ep t the 8-wid e mod ular 
p lug  used  on the...

DEFINITY ECS Release 8.2 Installation and Test
for Multi-Carrier Cabinets  555-233-114  Issue 1
April 2000
Install Telecommunications Cabling 
2-32 Station Wiring Design 
2
Figure 2-18. 356A Adapter
Use the ZD8AJ ad ap ter to c onnec t a Multi-b utton Elec tronic  Telep hone (MET) 
line c ord  to an information outlet. The ad ap ter interc hang es p airs 3 and  4 to 
c orresp ond  with the p air assig nments for the telep hone. The line c ord plug s into 
the ad ap ter, and  then the ad ap ter p lug s...

DEFINITY ECS Release 8.2 Installation and Test
for Multi-Carrier Cabinets  555-233-114  Issue 1
April 2000
Install Telecommunications Cabling 
2-33 Station Circuit Distribution from Equipment Room 
2
Satellite Locations
Satellite loc ations are c losets that p rovid e an ad ministration p oint (using  
c ross-c onnec t eq uip ment) for station c ab les and  where ad junc t p ower may b e 
ap p lied . The station c able c irc uits from the eq uip ment room MDF are 3-p air. At 
the satellite loc ation, 4-p...

DEFINITY ECS Release 8.2 Installation and Test
for Multi-Carrier Cabinets  555-233-114  Issue 1
April 2000
Install Telecommunications Cabling 
2-34 Station Circuit Distribution from Equipment Room 
2
4-Pair Station Circuits
Four-p air c irc uits c an b e run d irec tly from an eq uip ment room MDF to a 258A or 
BR2580A ad ap ter as shown in Fig ure 2-19
. The 4-p air station c ab les c onnec t the 
ad ap ter to the information outlets.
Figure 2-19. 4-Pair Circuit Distribution and Connectivity Figure...