Lucent Technologies DEFINITY Enterprise Communication Server Release 8.2 Installation And Test For Multi-Carrier Cabinets Manual

DEFINITY ECS Release 8.2 Installation and Test
for Multi-Carrier Cabinets  555-233-114  Issue 1
April 2000
Accessing and Activating the System 
3-25 Administer System Configurations (Release 8r) 
3
Screen 3-5. Typical System-Parameters Maintenance Screen
!CAUTION:
To prevent unnec essary troub le tic kets, d o not enab le the system 
alarms (Alarm Orig ination feature) until all installation and  
ad ministration p roc ed ures are c omp leted .
3. Move the c ursor b y p ressing  
Ta b 
to move d own the...

DEFINITY ECS Release 8.2 Installation and Test
for Multi-Carrier Cabinets  555-233-114  Issue 1
April 2000
Accessing and Activating the System 
3-26 Administer System Configurations (Release 8r) 
3
nHosp itality
nService Ob serving
An “ init”  p assword  is req uired  to modify c ustomer op tions. Contac t your reg ional 
CSA for the p assword . 
Use the following  p roc ed ure to c hang e the c ustomer’s optional features.
1. At the Command:
 prompt, type change system-parameters 
customer-options
 and...

DEFINITY ECS Release 8.2 Installation and Test
for Multi-Carrier Cabinets  555-233-114  Issue 1
April 2000
Accessing and Activating the System 
3-27 Administer System Configurations (Release 8r) 
3
Change and Logoff Critical Reliability System
If a c ritic al reliab ility system is installed  (1 with b oth p roc essor and  PNC 
d up lic ated ), follow these step s. Otherwise, p roc eed  to ‘‘
Change Site-Data’’ on 
page 3-27.
NOTE:
Be sure PNC Duplication
 was set to y in the c ustomer-options form. 
1....

DEFINITY ECS Release 8.2 Installation and Test
for Multi-Carrier Cabinets  555-233-114  Issue 1
April 2000
Accessing and Activating the System 
3-28 Administer System Configurations (Release 8r) 
3
Screen 3-7. Cabinet Administration form
Cabinet Description
nCabinet
 — Disp lay-only field . This field  shows the c abinet numb er as 
entered  in the c ommand  line.
nCabinet Layout
 — Enter the typ e of p hysic al c arrier layout. Valid  entries 
are five-carrier
 and single-carrier-stack
. Default is b...

DEFINITY ECS Release 8.2 Installation and Test
for Multi-Carrier Cabinets  555-233-114  Issue 1
April 2000
Accessing and Activating the System 
3-29 Administer System Configurations (Release 8r) 
3
nBuilding
 — Enter up  to ten c harac ters id entifying  the b uild ing  where the 
c ab inet is loc ated . Default is b lank.
Carrier Description
nCarrier Type
 — Enter the typ e of c arrier in the c ab inet b eing  
ad ministered . Valid  entries are dup-switch-node
, expansion-control
, 
not-used
, port
,...

DEFINITY ECS Release 8.2 Installation and Test
for Multi-Carrier Cabinets  555-233-114  Issue 1
April 2000
Accessing and Activating the System 
3-30 Administer Fiber Links (Release 8r Only) 
3
Screen 3-8. Typical Add Cabinet Form
Administer Fiber Links (Release 8r 
Only)
Ad minister system fib er link c onfig urations to matc h the hardware installed  and  
ac c ord ing  to the Fib er Op tic  Cab le Running  List. 
NOTE:
Fib er link ad ministration interac ts with or d ep end s up on other system...

DEFINITY ECS Release 8.2 Installation and Test
for Multi-Carrier Cabinets  555-233-114  Issue 1
April 2000
Accessing and Activating the System 
3-31 Administer Fiber Links (Release 8r Only) 
3
The following information d esc ribes general c irc uit pac k ad ministration 
information:
a. Use the Circ uit Pac ks form to ad minister c irc uit p ac ks to c arrier slots. 
Install or ad minister the c irc uit p ac ks (or assig ned  using the Circ uit Pac ks 
form) b efore ad ministering  voic e terminals,...

DEFINITY ECS Release 8.2 Installation and Test
for Multi-Carrier Cabinets  555-233-114  Issue 1
April 2000
Accessing and Activating the System 
3-32 Administer Fiber Links (Release 8r Only) 
3
Screen 3-9. Circuit Packs Screen
2. Sc roll throug h the p ag es on the form until the c arrier c ontaining  the new 
c irc uit p ac ks d isp lays. Enter the c irc uit p ac ks into the ap p rop riate slot 
loc ations on the form. Press 
En t e r when finished .
3. Type list fiber
 and press 
En te r. All ad...

DEFINITY ECS Release 8.2 Installation and Test
for Multi-Carrier Cabinets  555-233-114  Issue 1
April 2000
Accessing and Activating the System 
3-33 Administer Fiber Links (Release 8r Only) 
3
NOTE:
If this d ata is not c orrec t, wid eb and  errors (multimed ia c all hand ling ) 
may occ ur. 
11. For T1 sites, refer to ‘‘
T1 Installations Only’’. For E1 sites, refer to ‘‘E1  
Installations Only’’.
T1 Installations Only
a. The Framing Mode:
 field  is d isp lay only and  shows the hard ware setting .
b....

DEFINITY ECS Release 8.2 Installation and Test
for Multi-Carrier Cabinets  555-233-114  Issue 1
April 2000
Accessing and Activating the System 
3-34 Administer Fiber Links (Release 8r Only) 
3
Administer Fiber Links on Duplex Systems 
The PNC Dup lic ation feature is enab led  on the System-Parameters Customer- 
Options form and  Op eration of Dup lic ation is enab led  on the Dup lic ation-Related  
System-Parameters form. All non-d up lic ated  SNIs to SNI fib er links are 
automatic ally dup lic ated...