Lucent Technologies DEFINITY Enterprise Communication Server Release 8.2 Installation And Test For Multi-Carrier Cabinets Manual

DEFINITY ECS Release 8.2 Installation and Test
for Multi-Carrier Cabinets  555-233-114  Issue 1
April 2000
Test the System 
4-3 Test TDM Bus in PPN 
4
Screen 4-2. Example System Configuration Screen
NOTE:
Under Assigned Ports
, a “ u”  ind ic ates unassig ned  p orts and  a numb er 
ind ic ates the p ort has b een translated .
Test TDM Bus in PPN
1. Verify the sc reen d isp lays: Command:
2. Type test tdm port-network 1 
and  p ress 
En te r.
3. Verify the sc reen d isp lays the results similar to Sc...

DEFINITY ECS Release 8.2 Installation and Test
for Multi-Carrier Cabinets  555-233-114  Issue 1
April 2000
Test the System 
4-4 Test Tone-Clock Circuit Packs 
4
Screen 4-3. Example Test Results for TDM Port Network 1
4. If the result is FAIL
 for any test, c hec k the c onnec tors of the TDM bus 
c ab les in PPN 1.
Test Tone-Clock Circuit Packs
This test also d etec ts p rob lems with the TDM b us c ab les.
1. Verify the sc reen d isp lays: Command:
2. Type test tone-clock 1a 
and  p ress 
En te r.
3....

DEFINITY ECS Release 8.2 Installation and Test
for Multi-Carrier Cabinets  555-233-114  Issue 1
April 2000
Test the System 
4-5 Test SPE Duplication Memory Shadowing Link 
4
Screen 4-4. Example Test Results for Tone-Clock 1A
Test SPE Duplication Memory 
Shadowing Link
For hig h and  critic al reliab ility systems only.
1. Verify the sc reen d isp lays: Command:
2. Type test shadow-link 
and  p ress 
En te r.
3. Verify the sc reen d isp lays test results similar to Sc re e n  4 - 5
.
Screen 4-5. Example...

DEFINITY ECS Release 8.2 Installation and Test
for Multi-Carrier Cabinets  555-233-114  Issue 1
April 2000
Test the System 
4-6 Test Duplicated Switch Processing Element Interchange 
4
Test Duplicated Switch Processing
Element Interchange
For hig h and  critic al reliab ility systems only.
1. Verify the sc reen d isp lays: Command:
2. Type status cabinet 
 
and press 
En t e r.
3. Verify the sc reen d isp lays test results similar to Sc re e n  4 - 6
.
Screen 4-6. Example System Status Report for All...

DEFINITY ECS Release 8.2 Installation and Test
for Multi-Carrier Cabinets  555-233-114  Issue 1
April 2000
Test the System 
4-7 Test Expansion Interface Circuit Packs 
4
Test Expansion Interface Circuit Packs
1. Verify the sc reen d isp lays: Command:
2. Type test board 
 
(where UUCCss 
is the c ab inet, c arrier, and  
slot for an exp ansion interfac e c irc uit p ac k in the system) and  p ress 
En t e r. 
Lab els on the port network and  c arrier c ontaining the board  and  the lab el 
on the strip...

DEFINITY ECS Release 8.2 Installation and Test
for Multi-Carrier Cabinets  555-233-114  Issue 1
April 2000
Test the System 
4-8 Test TDM for each EPN 
4
Test TDM for each EPN
1. Verify the sc reen d isp lays: Command:
2. Type test tdm port-network 2 
and  p ress 
En te r .
3. Verify a test results sc reen similar to Sc reen 4-8 is d isp layed .
Screen 4-8. Example Test Results for TDM Port Network 2
4. If result is FAIL
 for any test, c hec k the c onnec tors of the TDM b us c ab les 
in  PPN  2 .
5. Rep...

DEFINITY ECS Release 8.2 Installation and Test
for Multi-Carrier Cabinets  555-233-114  Issue 1
April 2000
Test the System 
4-9 Test Tone-Clock Interchange for each EPN 
4
If any result is FAIL
, c hec k the assoc iated  TDM b us c ables and  
interc ab inet c ab les in the EPN.
3. Rep eat Step  2 for eac h installed  Tone-Cloc k c irc uit pac k.
Test Tone-Clock Interchange for each 
EPN
Critic al reliab ility only.
1. Verify the sc reen d isp lays: Command:
2. Type status system all-cabinets 
and p ress...

DEFINITY ECS Release 8.2 Installation and Test
for Multi-Carrier Cabinets  555-233-114  Issue 1
April 2000
Test the System 
4-10 Check Circuit Pack Configuration Again 
4
3. Type set expansion-link xxxx 
(where xxxx 
is the either 1 of the c ab inet, 
c arrier, and  p ort loc ations of the standb y exp ansion link). Press 
En t e r.
4. Verify the sc reen d isp lays:
Command successfully completed
Command:
5. Type status cabinet 
 
and press 
En t e r. See Sc reen 4-10.
Screen 4-10. Example of System...

DEFINITY ECS Release 8.2 Installation and Test
for Multi-Carrier Cabinets  555-233-114  Issue 1
April 2000
Test the System 
4-11 LED Indicators 
4
Next Steps
After the b asic  hard ware is installed  and  tested , 3 more step s must b e 
completed:
1. Install the telep hones and  other equip ment. See Chap ter 5, ‘‘
Install and  
Wire Telep hones and  Other Eq uip ment’’.
2. Ad minister the features, telep hones, and other eq uipment ac c ord ing  to 
c ustomer d ata on the p rovisioning  p lan. The d...

DEFINITY ECS Release 8.2 Installation and Test
for Multi-Carrier Cabinets  555-233-114  Issue 1
April 2000
Test the System 
4-12 LED Indicators 
4
Attendant Console LEDs
The console has 2 red LEDs, lab eled  “ ALM”  and  “ ACK” . The ALM LED lig hts 
stead ily when there is a major or minor alarm at the system c ab inet. The ACK 
LED lig hts stead ily if the alarm has been suc c essfully rep orted  to INADS. If the 
system is unab le to rep ort the alarm to INADS, the LED flashes; this sig nals the...