Lucent Technologies DEFINITY Enterprise Communication Server Release 8.2 Installation And Test For Multi-Carrier Cabinets Manual

DEFINITY ECS Release 8.2 Installation and Test
for Multi-Carrier Cabinets  555-233-114  Issue 1
April 2000
Accessing and Activating the System 
3-35 Administer Fiber Links (Release 8r Only) 
3
9. The DS1CONV Board Type
: field  is d isplay only and shows the type of 
DS1 Converter c irc uit p ac k in End p oint-1. The c irc uit p ac k type in 
Endpoint-1 (A-PNC) and Endpoint-1 (B-PNC) must be the same.
10. In the Is one endpoint remoted via a DS1 Converter 
Complex?
 field , enter y
 to sp ec ify that a...

DEFINITY ECS Release 8.2 Installation and Test
for Multi-Carrier Cabinets  555-233-114  Issue 1
April 2000
Accessing and Activating the System 
3-36 Administer Fiber Links (Release 8r Only) 
3
E1 Installations Only
1. Type y
 or n
 in the CRC?
 field . The “ CRC”  means Cyc lic  Red und anc y 
Chec k. This is an error d etec tion alg orithm.
2. The Line Termination:
 field  is d isp lay only. A 75 (75 Ohms) or 120 
(120 Ohms) typ ic ally d isp lays.
3. In the Facility A Circuit ID:
 field , enter an op...

DEFINITY ECS Release 8.2 Installation and Test
for Multi-Carrier Cabinets  555-233-114  Issue 1
April 2000
Accessing and Activating the System 
3-37 Administer Fiber Links (Release 8r Only) 
3
switc h c onnec tion (suc h as op tic al fiber, metallic  c able, or DS1CONV c irc uit 
packs and DS1 facility links between two endpoints). The two fiber endpoints can 
be:
nAn exp ansion interfac e (EI) c irc uit p ac k
nA switc h nod e interfac e (SNI) c irc uit p ac k
NOTE:
Only one ad ministrative terminal c...

DEFINITY ECS Release 8.2 Installation and Test
for Multi-Carrier Cabinets  555-233-114  Issue 1
April 2000
Accessing and Activating the System 
3-38 Administer Fiber Links (Release 8r Only) 
3
Administration of PNC Duplication
The PNC Dup lic ation feature is enab led  on the System-Parameters 
Customer-Op tions form and  Op eration of Dup lic ation is enab led  on the 
Dup lic ation-Related  System-Parameters form. When PNC Dup lic ation is enab led  
on the System-Parameters Customer-Op tions form, the...

DEFINITY ECS Release 8.2 Installation and Test
for Multi-Carrier Cabinets  555-233-114  Issue 1
April 2000
Accessing and Activating the System 
3-39 Administer Fiber Links (Release 8r Only) 
3
nBoard Location
 — Enter the c ab inet, c arrier, and  slot that id entifies the 
p hysic al loc ation of an SNI or EI b oard  that is the first endp oint of the fib er 
link.
nBoard Type
 — Disp lay-only field  showing  the typ e of c irc uit p ac k in 
Endpoint-1.
nBoard Location
 — Enter the c ab inet, c arrier,...

DEFINITY ECS Release 8.2 Installation and Test
for Multi-Carrier Cabinets  555-233-114  Issue 1
April 2000
Accessing and Activating the System 
3-40 Administer Fiber Links (Release 8r Only) 
3
nIs one endpoint remoted via DS1 Converter Complex?
 — En t e r  yes
 to 
sp ec ify that a DS1 c onverter c omp lex is used  to remote one end p oint. If 
yes
 is entered , A-PNC and  B-PNC DS1 Converter (DS1CONV) Attrib utes 
must b e ad ministered  on Pag es 2 and  3 (resp ec tively) of the form.
nBoard Location...

DEFINITY ECS Release 8.2 Installation and Test
for Multi-Carrier Cabinets  555-233-114  Issue 1
April 2000
Accessing and Activating the System 
3-41 Administer Fiber Links (Release 8r Only) 
3
DS1C Converter Complex Administration for TN574 Circuit Packs. 
Screen 3-12. Fiber Link Administration form for TN574 Circuit Pack (DS1 Converter 
Complex Administration) (page 2 of 3)
The following DS1 Converter Comp lex field s ap p ear on Pag e 2 when the Is one 
endpoint remoted via a DS1 Converter Complex...

DEFINITY ECS Release 8.2 Installation and Test
for Multi-Carrier Cabinets  555-233-114  Issue 1
April 2000
Accessing and Activating the System 
3-42 Administer Fiber Links (Release 8r Only) 
3
nFacility Installed
 — Enter yes
 in the B, C, and  D c olumns und er the DS1 
Converter Fac ilities head ing  to ind ic ate that this DS1 fac ility is p hysic ally 
installed . At least fac ility A must b e installed  within the c onverter c omp lex. 
Default is yes
 for Fac ility A.
nPasses Far-end Clock
 — Enter...

DEFINITY ECS Release 8.2 Installation and Test
for Multi-Carrier Cabinets  555-233-114  Issue 1
April 2000
Accessing and Activating the System 
3-43 Administer Fiber Links (Release 8r Only) 
3
nFraming Mode
 — Enter the framing  format, esf
 (d efault) or d4
, in the A, 
B, C, and D c olumns und er the DS1 Converter Fac ilities head ing  for eac h 
DS1 fac ility.
NOTE:
The D4 format is sup p orted by the Converter c irc uit p ac ks, b ut 
b ec ause of p rob lems inherent with this format (sp ec ific...

DEFINITY ECS Release 8.2 Installation and Test
for Multi-Carrier Cabinets  555-233-114  Issue 1
April 2000
Accessing and Activating the System 
3-44 Administer Fiber Links (Release 8r Only) 
3
nDS1CONV-2 Line Compensation
 — Enter the line c omp ensation (1
 to 5
) 
in the A, B, C, and  D c olumns und er the DS1 Converter Fac ilities head ing  
for eac h DS1 fac ility c onnec ted to ENDPOINT-2 (see Ta b l e  3 - 8
). The DS1 
line sig nal is p re-equalized  at the transmitter so that DS1 line p ulses are...