Lucent Technologies DEFINITY Enterprise Communication Server Release 8.2 Installation And Test For Multi-Carrier Cabinets Manual

DEFINITY ECS Release 8.2 Installation and Test
for Multi-Carrier Cabinets  555-233-114  Issue 1
April 2000
Install Telecommunications Cabling 
2-45 Patch Cord/Jumper Installation and Administration 
2
Figure 2-24. Label Graphic Symbols and Nomenclature
Eac h 110-typ e lab el id entifies 2 rows on the 110-typ e terminal b loc k. The up p er 
half id entifies the row ab ove it and  the lower half id entifies the row b elow it. The 
labels are inserted into the c lear p lastic  d esig nation strip s...

DEFINITY ECS Release 8.2 Installation and Test
for Multi-Carrier Cabinets  555-233-114  Issue 1
April 2000
Install Telecommunications Cabling 
2-46 Patch Cord/Jumper Installation and Administration 
2
Figure 2-25. Port Assignment Record Form
When satellite loc ations are p rovid ed , enter the satellite letter desig nation (“ A”  
throug h “ F” ) and  the jac k ap p earanc e in the eq uip ment room on the form. Also, 
enter the floor d esig nation and /or b uild ing  d esig nation if ap prop riate. For...

DEFINITY ECS Release 8.2 Installation and Test
for Multi-Carrier Cabinets  555-233-114  Issue 1
April 2000
Install Telecommunications Cabling 
2-47 Patch Cord/Jumper Installation and Administration 
2
Figure 2-26. Example 3-Pair Labeling to Information Outlet
The satellite symb ol must be installed  at all c onnec tion p oints b etween the b lue 
field  and  the information outlet. It must also be installed  at the information outlet 
itself.Figure Notes:
1. Eq uip ment Room
2. Satellite Loc ation
3....

DEFINITY ECS Release 8.2 Installation and Test
for Multi-Carrier Cabinets  555-233-114  Issue 1
April 2000
Install Telecommunications Cabling 
2-48 Patch Cord/Jumper Installation and Administration 
2
Fi g u re  2 - 2 7 shows an examp le labeling  sc heme for 4-p air c irc uits from the 
eq uip ment room to the information outlets. The lab eling  sc heme for 3-pair c irc uits 
from the MDF to a satellite loc ation.
Figure 2-27. Example 4-Pair Labeling to Information Outlet Figure Notes:
1. Eq uip ment...

DEFINITY ECS Release 8.2 Installation and Test
for Multi-Carrier Cabinets  555-233-114  Issue 1
April 2000
Install Telecommunications Cabling 
2-49 Create a Provisioning Plan 
2
Create a Provisioning Plan
Determine an ap p rop riate availab le p ort c irc uit on the system for eac h telep hone, 
trunk, and  p erip heral c onnec tion need ed , and , in ad d ition, p lan for auxiliary 
p ower for Basic  Rate Interfac e (BRI) and c ertain d isp lay sets.
Create a Port Assig nment Rec ord  to inc lud e the...

DEFINITY ECS Release 8.2 Installation and Test
for Multi-Carrier Cabinets  555-233-114  Issue 1
April 2000
Install Telecommunications Cabling 
2-50 Create a Provisioning Plan 
2 

Accessing and Activating the System 
3-1  
3
DEFINITY ECS Release 8.2 Installation and Test
for Multi-Carrier Cabinets  555-233-114  Issue 1
April 2000
3
Accessing and Activating the System
This c hapter c ontains p roc ed ures for installing the PC and  b ring ing  the system 
up  to a “ no red  LEDs”  state. This c hap ter d etails how to:
nAc cess the System
nAc tivate the System
nPower Up  the System
nSc reens and Command s
nSystem Administration
nSet Country Op tions
nChang e Craft Password
nSet...

DEFINITY ECS Release 8.2 Installation and Test
for Multi-Carrier Cabinets  555-233-114  Issue 1
April 2000
Accessing and Activating the System 
3-2 Access the System 
3
Access the System
To administer the DEFINITY ECS, you must be ab le to ac c ess the system. With 
Release 7 and  later, the DEFINITY ECS no long er req uires a d ed ic ated  
manag ement terminal, known as a system ad ministration terminal, or SAT. 
Personal c omp uters and  tec hnic ian lap top s eq uip p ed  with DEFINITY Site 
Ad...

DEFINITY ECS Release 8.2 Installation and Test
for Multi-Carrier Cabinets  555-233-114  Issue 1
April 2000
Accessing and Activating the System 
3-3 Access the System 
3
To install DSA on your c omp uter, p lac e the DSA CD in the CD-ROM d rive and  
follow the installation instructions. To start DSA or DNA, click on Start > 
Programs > DEFINITY Site Administration
. 
DSA sup p orts SAT emulation, whic h is d irec tly eq uivalent to using  the SAT (see 
Fi g u re  3 - 1
). DSA also sup p orts a whole rang...

DEFINITY ECS Release 8.2 Installation and Test
for Multi-Carrier Cabinets  555-233-114  Issue 1
April 2000
Accessing and Activating the System 
3-4 Access the System 
3
Figure 3-1. Typical DSA screen in SAT emulation mode
Figure 3-2. Typical DSA screen in GEDI mode