Lucent Technologies DEFINITY Business Communications System And GuestWorks Instructions Manual

DEFINITY® Business Communications System and GuestWorks® Issue 6 
Overview  555-231-208  Issue 1
April 2000
Features 
A-11 Basic features 
A
Authorization Codes
Authorization codes are used on particular calls to temporarily raise a telephone’s 
Facility Restriction Level. This is useful for those who make calls from telephones 
other than their own or from outside the network. If a call you dial is blocked 
because the telephone’s Facility Restriction Level is too low, you can enter your 
authorization...

DEFINITY® Business Communications System and GuestWorks® Issue 6 
Overview  555-231-208  Issue 1
April 2000
Features 
A-12 Basic features 
A
Automatic Incoming Call Display
Displays information about an incoming call even if the telephone is already in 
use.
Automatic Transmission Measurement System
Measures voice and data trunk facilities for satisfactory transmission 
performance. The measurement report contains data on trunk signal loss, noise, 
signaling return loss, and echo return loss. Acceptable...

DEFINITY® Business Communications System and GuestWorks® Issue 6 
Overview  555-231-208  Issue 1
April 2000
Features 
A-13 Basic features 
A
Bridged Call Appearance — 
Multi-Appearance Telephones
Allows calls to be handled from more than one telephone. A bridged call 
appearance is set up by administering a primary extension and the button number 
associated with it on a two-lamp button on another telephone. One way this 
feature is most often used is by secretaries or assistants who answer or handle...

DEFINITY® Business Communications System and GuestWorks® Issue 6 
Overview  555-231-208  Issue 1
April 2000
Features 
A-14 Basic features 
A
nPeriodic Pulse Metering — For non-ISDN trunks
Periodic Pulse Metering (PPM) accumulates pulses transmitted from the 
public network at periodic intervals during an outgoing trunk call. At the end 
of the call, the number of pulses collected is the basis for determining 
charges. 
Call-charge information helps you to account for the cost of outgoing calls without...

DEFINITY® Business Communications System and GuestWorks® Issue 6 
Overview  555-231-208  Issue 1
April 2000
Features 
A-15 Basic features 
A
nCall Forwarding Override — Allows the user at the forwarded-to extension 
to override Call Forwarding and either initiate a call or transfer a call back 
to the forwarded-from extension.
nCall Forward Busy/Don’t Answer — Allows calls to be forwarded when the 
called extension is busy or when the call is not answered after an 
administrable interval. If the...

DEFINITY® Business Communications System and GuestWorks® Issue 6 
Overview  555-231-208  Issue 1
April 2000
Features 
A-16 Basic features 
A
Call Waiting Termination
Allows users of single-line telephones who are on a call to be notified of a second 
call. This feature enables the second call to wait and sends a distinctive call 
waiting tone to the user who is being called.
Calling/Connected Party Number Restriction
Per-Line CPN Restriction
Users may block the calling party number when originating...

DEFINITY® Business Communications System and GuestWorks® Issue 6 
Overview  555-231-208  Issue 1
April 2000
Features 
A-17 Basic features 
A
Code Calling Access
Allows attendants, users, and tie trunk users to page someone using coded chime 
signals. This feature is helpful for users who are often away from their telephones 
or at a location where a ringing telephone might be disturbing.
Conference — Attendant
Allows an attendant to set up a conference call for as many as six conferees, 
including the...

DEFINITY® Business Communications System and GuestWorks® Issue 6 
Overview  555-231-208  Issue 1
April 2000
Features 
A-18 Basic features 
A
is used when working from home. The coverage path used from home would have 
a call to the employee’s work phone cover to his or her home phone. If the 
employee does not answer the call or is busy on another call, the call is redirected 
back to the switch for further processing, such as coverage to voice mail.
Crisis Alert
Visibly and audibly alerts attendant...

DEFINITY® Business Communications System and GuestWorks® Issue 6 
Overview  555-231-208  Issue 1
April 2000
Features 
A-19 Basic features 
A
Data Privacy
Protects analog data calls from being disturbed by any of the system’s overriding 
or ringing features. Data Privacy is activated when a user dials an activation code 
at the beginning of the call.
Data Restriction
Like Data Privacy, this feature protects analog data calls from being disturbed by 
any of the system’s overriding or ringing features. It...

DEFINITY® Business Communications System and GuestWorks® Issue 6 
Overview  555-231-208  Issue 1
April 2000
Features 
A-20 Basic features 
A
Dial Plan
The dial plan is the system’s guide to digit translation. When the system receives 
dialed digits, the system must know what to expect next based on the digits 
received so far. For example, if a user dials 4, the dial plan tells the system how 
many more digits to expect before the call is processed.
Dialed Number Identification Service
Displays, for a...