Land Rover Range Rover 2002my On Workshop Procedures Lm 6th Edition Nas Rover Manual

SEATS
76-5-12 REPAIRS
5.Carefully release squab cover beading from top 
of rear squab frame.
6.Release velcro to reveal screw securing rear 
armrest trim to squab finisher, remove screw.
7.Carefully release 11 retaining clips securing 
armrest rear finisher to front finisher, remove 
finisher.
8.Carefully prise back finisher, releasing 
adhesive.
9.Remove finisher from squab.
Refit
1.Apply suitable adhesive to finisher.
2.Position and fit finisher to squab.
3.Position armrest rear finisher and secure...

SEATS
REPAIRS 76-5-13
4.Remove 6 scrivets securing finisher.
5.With assistance, push back both spring loaded 
seat hinges and remove finisher.
Refit
1.With assistance, push back on both hinges, 
position and fit finisher.
2.Fit scrivets to secure finisher.
3.Position LH seat fold mechanism finisher, 
secure with screws.
4.Position RH seat fold mechanism finisher, 
secure with screws.
5.Fit LH rear seat.
 
 +  SEATS, REPAIRS, Rear seat.
Finisher - arm rest - rear seat - front
$% 78.55.14
Remove
1.Remove...

SEATS
76-5-14 REPAIRS
6.Release velcro to reveal screw securing rear 
armrest trim to squab finisher, remove screw.
7.Carefully release 11 retaining clips securing 
armrest rear finisher to front finisher, remove 
finisher.
8.Carefully release 7 retaining clips securing 
armrest finisher, remove finisher.
Refit
1.Position finisher and secure retaining clips.
2.Position both finishers to pivot points, secure 
with clevis pins.
3.Position armrest rear finisher and secure 
retaining clips.
4.Fit screw...

SEATS
REPAIRS 76-5-15
3.Remove 2 screws securing lower squab 
finisher.
4.Release lower finisher from 6 retaining clips 
and remove finisher.
5.Disconnect 2 tension straps securing upper 
squab cover.
6.Release velcro strip securing squab cover.7.Release beading from squab cover finisher.
8.Release finisher from 4 retaining clips and 
remove backboard.
Refit
1.Position upper squab cover finisher and secure 
retaining clips.
2.Secure squab cover beading to finisher.
3.Secure squab cover velcro strip....

SEATS
76-5-16 REPAIRS
Bladder - lumbar support - front seat 
$% 78.60.01
Remove
1.Remove seat assembly.
 
 +  SEATS, REPAIRS, Front seat.
2.Remove Allen bolt securing arm rest.
3.Remove armrest from boss.
4.Remove headrest.
5.Release 3 backboard tension straps from under 
seat.6.Release staples securing squab cover to lower 
backboard.
7.Release squab side cover from both sides of 
backboard.
8.Release 2 studs securing lower half of 
backboard.
9.Release backboard from seat.
M78 0613 

SEATS
REPAIRS 76-5-17
10.Disconnect multiplugs from lumbar pump and 
valve.
11.Disconnect multiplug from heated seat circuit.
12.Release harness from retaining clip and feed 
harness through squab cover.
13.Remove 2 Torx bolts and remove squab frame 
from seat frame.
14.Raise front of squab cover to gain access to 
lumbar bladder.15.Disconnect vacuum and pressure pipes from 
bladder.
16.Release bladder from frame.
Refit
1.Fit and secure bladder to frame.
2.Connect vacuum and pressure pipes to 
bladder....

SEATS
76-5-18 REPAIRS
Bladder - lumbar support - front seat - 
models with adjustable upper squab
$% 78.60.02
Remove
1.Remove seat assembly.
 
 +  SEATS, REPAIRS, Front seat.
2.Release 3 backboard tension straps from under 
seat.
3.Remove 2 screws securing lower squab 
finisher.
4.Release lower finisher from 6 retaining clips 
and remove.
5.Disconnect 2 tension straps securing upper 
squab cover.
6.Release velcro strip securing squab cover.
M78 0628 

SEATS
REPAIRS 76-5-19
7.Release beading from squab cover finisher.
8.Release finisher from 4 retaining clips and 
remove.
9.Carefully release 2 retaining clips securing  
headrest to motor housing.
10.Remove headrest.
11.Release retaining strip securing squab cover to 
lower frame.12.Disconnect multiplugs from headrest and upper 
squab motors.
13.Disconnect harness multiplugs from lumbar 
pump and valve.
14.Release squab harness from 4 retaining clips.
M78 0635 

SEATS
76-5-20 REPAIRS
15.Disconnect multiplug from heated seat circuit.
16.Release 2 retaining strips, securing both sides 
of lower squab cover to frame.
17.Remove 2 Torx bolts securing squab frame to 
seat frame.
18.Remove squab assembly from seat assembly.
19.Release 4 retaining strips securing both sides 
of squab assembly to frame.
20.Disconnect 3 multiplugs from heated seat 
circuit.21.Raise front of squab cover to gain access to 
lumbar bladder.
22.Disconnect vacuum and pressure pipes from...

SEATS
REPAIRS 76-5-21
Switch - lumbar support 
$% 78.60.15 
Before disconnecting the battery, ensure all text and 
cautions in the battery disconnection section are 
observed. 
 
 +  GENERAL INFORMATION, Electrical 
Precautions.
Remove
1.Raise seat cushion.
2.Make the SRS system safe. 
 
 +  GENERAL INFORMATION, 
Supplementary Restraint System (SRS) 
Precautions.
WARNING: Always disconnect both battery 
leads before beginning work on the SRS 
system. Disconnect the negative lead first. 
Never reverse...