Home
>
Land Rover
>
Automobile
>
Land Rover Range Rover 2002my On Workshop Procedures Lm 6th Edition Nas Rover Manual
Land Rover Range Rover 2002my On Workshop Procedures Lm 6th Edition Nas Rover Manual
Here you can view all the pages of manual Land Rover Range Rover 2002my On Workshop Procedures Lm 6th Edition Nas Rover Manual. The Land Rover manuals for Automobile are available online for free. You can easily download all the documents as PDF.
Page 591
DOORS 76-1-6 REPAIRS Glass regulator - front door $% 76.31.45 Remove 1.Remove front door glass. + DOORS, REPAIRS, Glass - front door. 2.Disconnect multiplug from regulator motor. 3.Remove clip securing cable to side impact protection beam. 4.Remove Torx bolt and clamp securing regulator to side impact protection beam. 5.Remove 2 lower bolts securing regulator to door frame and discard. 6.Remove 3 Torx bolts securing regulator to door frame and withdraw regulator through access panel.Refit...
Page 592
DOORS REPAIRS 76-1-7 Glass regulator - rear door $% 76.31.46 Remove 1.Remove rear door glass. + DOORS, REPAIRS, Glass - rear door. 2.Disconnect multiplug from regulator motor. 3.Remove and discard regulator lower fixing bolt. 4.Remove 2 Torx bolts securing regulator to door frame and withdraw regulator through access panel. Refit 1.Position regulator to door and unclip motor transit package from rail. 2.Fit regulator upper bolts and tighten to 10 Nm (7 lbf.ft). 3.Fit new lower bolt and tighten...
Page 593
DOORS 76-1-8 REPAIRS Seal - waist inner - front door $% 76.31.55 Remove 1.Remove door trim casing. + DOORS, REPAIRS, Trim casing - front door. 2.Carefully release waist seal from flange. 3.Remove waist seal. Refit 1.Fit waist seal. 2.Fit door trim casing. + DOORS, REPAIRS, Trim casing - front door. Trim casing - front door $% 76.34.01 Remove 1.Remove 3 screws securing trim casing to door. 2.Release access cover in trim casing and remove screw. 3.Carefully release 13 clips securing trim...
Page 594
DOORS REPAIRS 76-1-9 5. Pull trim casing horizontally from 7 clips securing the upper edge to inner glass seal, avoid damage to the locking button on final release. 6.Release door operating cable from door casing and move aside. 7.Disconnect 6 multiplugs from door harness and remove trim casing. NOTE: Do not carry out further dismantling if component is removed for access only. 8.Remove 3 Torx screws securing speaker to trim casing and remove speaker 9.Remove 13 clips from door casing. 10.Remove...
Page 595
DOORS 76-1-10 REPAIRS 12.Remove 2 nuts securing door pocket finisher, carefully release finisher from 3 clips and remove finisher. 13.Remove 2 Torx screws securing inner door pocket finisher to casing. Remove finisher. 14.Depress clip and remove trim casing light assembly.15.Carefully release window lift switch pack from door trim casing. 16.Remove access cover from door casing. Refit 1.Fit access cover to door casing. 2.Position switch pack to door casing, align and secure clips. 3.Fit light...
Page 596
DOORS REPAIRS 76-1-11 Trim casing - rear door $% 76.34.04 Remove 1.Remove 3 screws securing trim casing to door. 2.Release access cover in trim casing and remove screw. 3.Carefully release 11 clips securing trim casing to door. 4.Ensure centre trim casing clip is released. 5.Release 6 clips securing door casing to inner glass seal horizontally, avoid damage to locking button on final release. 6.Release door operating cable from door casing and move aside.7.Disconnect 3 multiplugs from door harness...
Page 597
DOORS 76-1-12 REPAIRS 9.Remove 11 clips from trim casing. 10.Remove retaining clip from door handle reinforcement bracket. 11.Remove 2 nuts securing door handle reinforcement bracket and remove bracket. 12.Remove Torx screw securing door pocket finisher to casing. Remove finisher.13.Depress clip and remove trim casing light assembly. 14.Carefully release window lift switch from trim casing. 15.Remove access cover from door casing. Refit 1.Fit access cover to door casing. 2.Position switch pack to...
Page 598
DOORS REPAIRS 76-1-13 Trim casing - tailgate upper $% 76.34.11 Remove 1.Remove 2 Torx screws securing trim casing to upper tailgate. 2.Carefully release 11 clips securing trim casing to tailgate. 3.Disconnect both tailgate lamp multiplugs. 4.Disconnect tailgate latch manual release cable from trim casing. 5.Remove trim casing. NOTE: Do not carry out further dismantling if component is removed for access only. 6.Remove both lamps and retaining clips from trim casing. Refit 1.Fit lamps and clips to...
Page 599
DOORS 76-1-14 REPAIRS Capping - front door arm rest $% 76.34.15 Remove 1.Release 2 clips securing door handle capping to arm rest, ease forward and remove. NOTE: Do not carry out further dismantling if component is removed for access only. 2.Remove 2 clips from capping. Refit 1.Fit new clips to capping. 2.Align capping to arm rest and secure with clips. Plastic sheet - front door $% 76.34.18 Remove 1.Remove door airbag. + RESTRAINT SYSTEMS, REPAIRS, Airbag module - side impact - front door....
Page 600
DOORS REPAIRS 76-1-15 Plastic sheet - rear door $% 76.34.28 Remove 1.Remove rear door trim casing. + DOORS, REPAIRS, Trim casing - rear door. 2.Disconnect speaker multiplug for access. 3.Remove plastic sheet. Refit 1.Fit plastic sheet. 2.Connect multiplug to speaker. 3.Fit rear door trim casing. + DOORS, REPAIRS, Trim casing - rear door. Finisher - door frame - front $% 76.34.42 Remove 1.Remove inner waist seal. + DOORS, REPAIRS, Seal - waist inner - front door. 2.Disconnect anti-trap...