Home
>
Land Rover
>
Automobile
>
Land Rover Range Rover 2002my On Workshop Procedures Lm 6th Edition Nas Rover Manual
Land Rover Range Rover 2002my On Workshop Procedures Lm 6th Edition Nas Rover Manual
Here you can view all the pages of manual Land Rover Range Rover 2002my On Workshop Procedures Lm 6th Edition Nas Rover Manual. The Land Rover manuals for Automobile are available online for free. You can easily download all the documents as PDF.
Page 561
RESTRAINT SYSTEMS 75-16 REPAIRS 7.Remove clip securing centre console heater duct to HEVAC assembly and remove the heater duct. 8.Remove 4 bolts securing centre console heater motor retaining bracket to transmission tunnel. 9.Remove centre console heater motor retaining bracket. 10. Release and remove DCU cover from DCU.11.Disconnect multiplug from DCU. 12.Remove nut securing earth lead to DCU. Remove earth lead. 13.Remove 2 nuts securing DCU to transmission tunnel. Remove DCU. CAUTION: The SRS DCU...
Page 562
RESTRAINT SYSTEMS REPAIRS 75-17 Pre-tensioner - seat belt - front - deployment - in vehicle $% 76.73.77 These guidelines are written to aid authorised personnel to carry out the safe disposal of airbag modules. Deploy WARNING: It is imperative that before any work is undertaken on the SRS system, the appropriate information is read thoroughly. 1.Make the SRS system safe. + GENERAL INFORMATION, Supplementary Restraint System (SRS) Precautions. 2.Disconnect multiplug from seat belt pre-...
Page 563
RESTRAINT SYSTEMS 75-18 REPAIRS 9.Disconnect deployment tool fly lead from seat belt pre-tensioner. CAUTION: Do not re-use or salvage any parts of the SRS system. NOTE: Do not transport deployed SRS components in the vehicle passenger compartment. Pre-tensioner - front seat belt - deployment - off vehicle $% 76.73.78 These guidelines are written to aid authorised personnel to carry out the safe disposal of airbag modules. Deploy WARNING: It is imperative that before any work is undertaken on...
Page 564
RESTRAINT SYSTEMS REPAIRS 75-19 4.Position LRT-86-007/02 in vice, ensuring that vice jaws grip tool above the bottom flange to prevent possibility of tool being forced upwards during detonation. Tighten vice. 5.Fit and secure seat belt pre-tensioner to LRT- 86-007/02.6.Connect deployment tool fly lead LRT-86-003/ 08 to seat belt pre-tensioner. 7.Connect deployment tool LRT-86-003 to deployment tool fly lead LRT-86-003/08. 8.Connect deployment tool LRT-86-003 to battery. WARNING: Ensure all personnel...
Page 565
RESTRAINT SYSTEMS 75-20 REPAIRS 14.Transport deployed seat belt pre-tensioner to designated area for incineration. CAUTION: Do not re-use or salvage any parts of the SRS system. NOTE: Do not transport deployed SRS components in the vehicle passenger compartment. Airbag module - steering wheel - deployment - off vehicle $% 76.74.16 These guidelines are written to aid authorised personnel to carry out the safe disposal of airbag modules. Deploy WARNING: It is imperative that before any work is...
Page 566
RESTRAINT SYSTEMS REPAIRS 75-21 4.Position LRT-86-007/02 in vice, ensuring that vice jaws grip tool above the bottom flange to prevent possibility of tool being forced upwards during detonation. Tighten vice. 5.Fit and secure 2 off LRT-86-007/05 to LRT-86- 007/02. 6.Fit and secure 2 off LRT-86-007/08 to airbag lower fixing studs.7.Fit and secure airbag to LRT-86-007/05. 8.Connect deployment tool fly lead LRT-86-003/ 05 to airbag. 9.Connect deployment tool LRT-86-003 to deployment tool fly lead...
Page 567
RESTRAINT SYSTEMS 75-22 REPAIRS 11.Press deployment tool operating button to deploy airbag module. 12.Disconnect deployment tool from battery. WARNING: During deployment parts of the airbag module become hot enough to burn you. Wait 30 minutes after deployment before touching the airbag module. 13.Disconnect deployment tool fly lead from airbag. 14.Remove airbag module from holding tools and place in a sealed bag, ready for disposal. 15.Wipe down holding tools with a damp cloth and remove from...
Page 568
RESTRAINT SYSTEMS REPAIRS 75-23 5.Connect deployment tool fly lead LRT-86-003/ 05 to airbag. 6.Connect deployment tool LRT-86-003 to deployment tool fly lead LRT-86-003/05. 7.Connect deployment tool LRT-86-003 to battery. WARNING: Ensure all personnel are at least 15 metres (50 feet) away from the airbag module. 8.Press deployment tool operating button to deploy airbag module. 9.Disconnect deployment tool from battery. WARNING: During deployment parts of the airbag module become hot enough to burn...
Page 569
RESTRAINT SYSTEMS 75-24 REPAIRS Airbag module - passenger - deployment - off vehicle $% 76.74.18 These guidelines are written to aid authorised personnel to carry out the safe disposal of airbag modules. Deploy WARNING: It is imperative that before any work is undertaken on the SRS system, the appropriate information is read thoroughly. 1.Make the SRS system safe. + GENERAL INFORMATION, Supplementary Restraint System (SRS) Precautions. 2.Remove passenger airbag from vehicle. + RESTRAINT...
Page 570
RESTRAINT SYSTEMS REPAIRS 75-25 6.Connect deployment tool fly lead LRT-86-003/ 05 to airbag. 7.Connect deployment tool LRT-86-003 to deployment tool fly lead LRT-86-003/05. 8.Connect deployment tool LRT-86-003 to battery. WARNING: Ensure all personnel are at least 15 metres (50 feet) away from the airbag module. 9.Press deployment tool operating button to deploy airbag module. 10.Disconnect deployment tool from battery. WARNING: During deployment parts of the airbag module become hot enough to burn...