Land Rover Range Rover 2002my On Workshop Procedures Lm 6th Edition Nas Rover Manual

RESTRAINT SYSTEMS
75-6 REPAIRS
Airbag module - steering wheel
$% 76.74.01 
Before disconnecting the battery, ensure all text and 
cautions in the battery disconnection section are 
observed. 
 
 +  GENERAL INFORMATION, Electrical 
Precautions.
WARNING: It is imperative that before any work 
is undertaken on the SRS system, the 
appropriate information is read thoroughly.
WARNING: Always disconnect both battery leads 
before beginning work on the SRS system. 
Disconnect the negative lead first. Never...

RESTRAINT SYSTEMS
REPAIRS 75-7
6.Disconnect multiplugs from switch units and 
remove the switch units.
Refit
NOTE: If the SRS component is to be replaced, 
the bar code of the new unit must be recorded.
1.Position switch units and connect multiplugs.
2.Fit switch units to airbag module and tighten 
Torx screws to 2.5 Nm (1.8 lbf.ft).
3.Position airbag module and connect multiplugs.
NOTE: If the airbag module is to be replaced, 
the bar code of the new module must be 
recorded.
4. Models with heated...

RESTRAINT SYSTEMS
75-8 REPAIRS
7.Disconnect multiplug from airbag module.
8.Remove airbag module.
NOTE: Do not carry out further dismantling if 
component is removed for access only. 
WARNING: Store the airbag module with the 
deployment side uppermost. If it is stored 
deployment side down, accidental 
deployment will propel the airbag module 
with enough force to cause serious injury.
WARNING: Store the airbag module or seat 
pre-tensioner in a designated storage area. 
If there is no designated...

RESTRAINT SYSTEMS
REPAIRS 75-9
4.Remove 4 Torx screws securing airbag module 
and remove airbag.
WARNING: Store the airbag module with the 
deployment side uppermost. If it is stored 
deployment side down, accidental 
deployment will propel the airbag module 
with enough force to cause serious injury.
WARNING: Store the airbag module or seat 
pre-tensioner in a designated storage area. 
If there is no designated storage area 
available, store in the locked luggage 
compartment/loadspace area of the...

RESTRAINT SYSTEMS
75-10 REPAIRS
6.Remove and discard 3 Torx bolts securing side 
impact crash sensor retaining bracket to B 
post.
7.Release harness from retaining clips and 
disconnect multiplug from side impact crash 
sensor.
8.Remove side impact crash sensor and 
retaining bracket from B post.
Refit
NOTE: If the SRS component is to be replaced, 
the bar code of the new unit must be recorded.
1.Position side impact crash sensor and retaining 
bracket to B post, secure harness and connect 
multiplug to...

RESTRAINT SYSTEMS
REPAIRS 75-11
Refit
NOTE: If the SRS component is to be replaced, 
the bar code of the new unit must be recorded.
1.Ensure battery terminals are clean.
2.Position battery disconnect unit to junction box, 
fit nut and tighten to 25 Nm (18 lbf.ft). Fit cover. 
3.Fit battery disconnect unit to the positive 
battery terminal and tighten nut. Fit cover.
4.Position positive lead to the battery disconnect 
unit, fit nut and tighten to 25 Nm (18 lbf.ft). Fit 
cover.
5.Connect multiplug to...

RESTRAINT SYSTEMS
75-12 REPAIRS
5.Disconnect 5 multiplugs from rotary coupler.
6.Remove rotary coupler assembly.
NOTE: Do not carry out further dismantling if 
component is removed for access only.
7.Depress clips and remove switches from 
coupler assembly.
Refit
1.Fit switches to rotary coupler.
2.Connect multiplugs to rotary coupler.
3.Fit rotary coupler to column, secure with Torx 
screws.
4.Fit steering column nacelle.
 
 +  STEERING, REPAIRS, Nacelle - 
column - complete.
5.Fit steering wheel
 
 +...

RESTRAINT SYSTEMS
REPAIRS 75-13
5.Remove airbag module.
WARNING: Store the airbag module with the 
deployment side uppermost. If it is stored 
deployment side down, accidental 
deployment will propel the airbag module 
with enough force to cause serious injury.
WARNING: Store the airbag module or seat 
pre-tensioner in a designated storage area. 
If there is no designated storage area 
available, store in the locked luggage 
compartment/loadspace area of the vehicle, 
and inform the workshop supervisor....

RESTRAINT SYSTEMS
75-14 REPAIRS
10.Remove 2 screws securing headlining.
11.Carefully lower edge of headlining for access to 
airbag fixings.
12.Remove 2 Torx screws securing airbag to A 
post.
13.Remove Torx screw securing airbag webbing 
to A post.14.Remove Torx screw securing airbag webbing 
to cantrail.
15.Release 4 clips securing airbag module.
16.Remove airbag module.
WARNING: Store the airbag module with the 
deployment side uppermost. If it is stored 
deployment side down, accidental 
deployment...

RESTRAINT SYSTEMS
REPAIRS 75-15
4.Fit rear console.
 
 +  INTERIOR FITTINGS, REPAIRS, 
Console - headlining - rear.
5.Fit B post upper finisher.
 
 +  INTERIOR FITTINGS, REPAIRS, 
Trim finisher - B post - upper.
6.Fit D post upper finisher.
 
 +  INTERIOR FITTINGS, REPAIRS, 
Trim finisher - D post - upper.
7.Fit E post finisher.
 
 +  INTERIOR FITTINGS, REPAIRS, 
Trim finisher - E post.
8.Fit grab handles.
 
 +  INTERIOR FITTINGS, REPAIRS, 
Handle - grab.
9.Fit sun visor.
 
 +  INTERIOR FITTINGS,...