Land Rover Range Rover 2002my On Workshop Procedures Lm 6th Edition Nas Rover Manual

EXTERIOR FITTINGS
76-2-16 REPAIRS
Finisher - E post 
$% 76.43.36
Remove
1.Remove 4 studs securing finisher to E post.
2.Release 4 clips and remove finisher.
3.Remove and discard fixings from finisher.
4.Remove and discard fixing retaining sacks from 
E post.
Refit
1.Fit new fixing retaining sacks to E post.
2.Fit new fixings to finisher.
3.Fit finisher, secure with clips and studs.
Side finisher - windscreen 
$% 76.43.39
Remove
1.Remove 4 scrivets securing finisher to A post.
2.Release 4 fixings and...

EXTERIOR FITTINGS
REPAIRS 76-2-17
Lower finisher - windscreen 
$% 76.43.41
Remove
1.Remove RH windscreen side finisher.
 
 +  EXTERIOR FITTINGS, REPAIRS, 
Side finisher - windscreen.
2.Remove both wiper arms.
 
 +  WIPERS AND WASHERS, REPAIRS, 
Arm - wiper - front screen.
3.Using LRT-99-500A remove aluminium boss 
from both wiper spindles and discard.
4.Remove plastic inserts from both wiper 
spindles.
5.Release both drain tubes from underside of 
finisher.
6.Release clips and carefully position finisher...

EXTERIOR FITTINGS
76-2-18 REPAIRS
Roof moulding
$% 76.43.68
Remove
1.Carefully raise the front edge of moulding, 
release from 11 clips and remove moulding.
2.Remove 11 clips from roof panel.
Refit
1.Clean roof channel.
2.Fit clips to roof panel.
3.Fit moulding and secure to clips.
Finisher - tailgate - lower 
$% 76.43.99
Remove
1.Carefully release 7 clips securing tailgate 
finisher to body. Remove finisher.
CAUTION: Always protect paintwork and 
glass when removing trim finishers.
NOTE: Do not carry...

EXTERIOR FITTINGS
REPAIRS 76-2-19
Refit
1.Fit adhesive clips to finisher, note fitted 
position.
2.Fit retaining clips to finisher.
3.Clean tailgate, remove remaining adhesive 
residue.
4.Remove protective covering from adhesive 
pads, align finisher to tailgate and secure clips. 
Ensure adhesive pads are pressed into 
position.
Front grille 
$% 76.55.03
Remove
1.Remove 3 screws securing grille to bonnet 
locking platform.
2.Release 3 clips securing grille to armature.
3.Disconnect multiplug from ambient...

EXTERIOR FITTINGS
76-2-20 REPAIRS 

INTERIOR FITTINGS
REPAIRS 76-3-1
INT ERIOR FITTINGS REPAIRS
Sun visor 
$% 76.10.47
Remove
1.Release sun visor from retaining clip.
2.Carefully release and remove trim from 
mounting.
3.Remove 3 Torx screws securing visor.
4.Disconnect multiplug and remove visor.
5.Remove screw securing sun visor clip to roof 
and remove clip.
Refit
1.Fit sun visor clip and secure with screw.
2.Position sun visor and connect multiplug.
3.Fit sun visor to roof and secure with screws.
4.Fit sun visor to clip.
5.Fit trim to...

INTERIOR FITTINGS
76-3-2 REPAIRS
Trim casing - rear quarter - lower 
$% 76.13.12
Remove
1.Release D post upper finisher.
 
 +  INTERIOR FITTINGS, REPAIRS, 
Trim finisher - D post - upper.
2.Remove D post lower trim.
 
 +  INTERIOR FITTINGS, REPAIRS, 
Trim finisher - D post - lower.
3.Remove Allen screw securing load space 
securing ring to load space floor, release and 
remove securing ring assembly.
4.Release and remove seat anchor escutcheon
5.Remove access panel.
6.Release 2 turn buckles.
7.Remove 3...

INTERIOR FITTINGS
REPAIRS 76-3-3
Foot rest finisher - LHD 
$% 76.13.24
Remove
1.Remove carpet retainer.
 
 +  INTERIOR FITTINGS, REPAIRS, 
Retainer - front carpet.
2.Release 4 clips securing inner edge of footrest 
pad to finisher, roll pad clockwise and remove.
3.Remove bolt securing footrest finisher to body.
4.Lift bonnet lock release handle and withdraw 
finisher from clips. Pull horizontal and rearward 
to remove.
Refit
1.Fit finisher to A post and secure with clips.
2.Fit bolt securing footrest...

INTERIOR FITTINGS
76-3-4 REPAIRS
Trim finisher - A post - lower 
$% 76.13.27
Remove
1.Remove carpet retainer.
 
 +  INTERIOR FITTINGS, REPAIRS, 
Retainer - front carpet.
2.Release sufficient door aperture seal to access 
lower trim finisher.
3.Release and remove finisher horizontally from 
2 retaining clips.
NOTE: Do not carry out further dismantling if 
component is removed for access only.
4.Check condition of finisher retaining clips in 
body, replace if damaged.
Refit
1.Fit retaining clips to body....

INTERIOR FITTINGS
REPAIRS 76-3-5
Trim finisher - D post - upper  
$% 76.13.30
Remove
1.Remove lower D post finisher.
 
 +  INTERIOR FITTINGS, REPAIRS, 
Trim finisher - D post - lower.
2.Remove and discard Torx bolt from lower seat 
belt anchor.
3.Release upper D post finisher from seat belt 
webbing and remove finisher.
Refit
1.Pass seat belt through upper D post finisher, fit 
belt and tighten Torx bolt to 50 Nm (37 lbf.ft).
2.Fit finisher.
 
 +  INTERIOR FITTINGS, REPAIRS, 
Trim finisher - D post -...