Kyocera TASKalfa 300i User Manual

Default Setting (System Menu)
8-69
8
Secure Protocol
Encrypt the communication between your PC and the machine using the SSL encryption. After changing the 
setting, restart the system or turn the machine OFF and then ON again. Fo r detailed information on restarting 
the system, refer to  Restarting the System on page 8-63.
The following Secure Protocol settings are available.
• SSL Setup …8-69
• IPP Security  Setup …8-69
• HTTP Security Setup …8-69
• LDAP Security  Setup …8-70
SSL Setup
Select whether...

Default Setting (System Menu)
8-70
NOTE: HTTP must be set to [On] in Protocol Detail on page 8-66.
Use the procedure below.
1Press the  System Menu  key.
2Press [System], [Next] of  Network, [Next] of  Secure Protocol , and then [Change] of  HTTPS Security.
3Press [HTTP or HTTPS] or [HTTPS Only].
4Press [OK].
5After changing the setting, re start the system or turn the ma chine OFF and then ON again. 
For detailed information on restarting the system, refer to  Restarting the System on page 8-63.
LDAP...

Default Setting (System Menu)
8-71
8
IPSec Setting
Sets up IPSec. The default setting is Off. Use the procedure below.
1Press the  System Menu  key.
2Press [System], [Next] of  Network, and then [Change] of  IPSec.
NOTE: If user login administration is di sabled, the user authentication scre en appears. Enter your login user 
name and password and then press [Login]. For this, you  need to login with administrator privileges. Refer to 
Adding a User on page 11-5 for the default login user name and...

Default Setting (System Menu)
8-72
Interface Block Setting
This allows you to protect this machine by blocking the interface with external devices such as USB hosts or 
optional interfaces. 
The following interface block settings are available:
• USB Host (USB memory slot setting)
• USB Device (USB interface setting)
• Optional interface (Optional interface card setting)
USB Host (USB memory slot setting)
This locks and protects the USB memory slot (A1) or USB port (A2) (USB host). The default setting is...

Default Setting (System Menu)
8-73
8
Security Level (Security Level setting)
The Security Level setting is primarily a menu option used by service personnel for maintenance work. There is 
no need for customers to use this menu.
Document Guard Setting
When the optional Printed Document Gu ard Kit is installed, the machine prevents the unauthorized copying and/
or transmission of documents that contain  important confidential or personal information.
Use the Security Watermark of Advanced in KX DRIVER to...

Default Setting (System Menu)
8-74
Limitations:- Scanning speed will be limited  to the speed of scanning 600 dpi image. (Printing speed will not 
be limited.)
- FAX transmission will be limited to the memory transmission.
Note: - The Printed Document Guard Kit should not fully prevents a leak of information. We do not guarantee any loss incurred while using this feature or when malfunction occurred with this 
feature.
- The guard pattern printed on the colored paper or paper that is decorated with...

Default Setting (System Menu)
8-75
8
Optional Functions
You can use the optional applications installed on this machine.
Overview of the Applications
The applications listed below are installed on this machine. 
You can use these applications for  a limited period on a trial basis.
• Printed Document Guard Kit
This prevents the unauthorized copying an d/or transmission of documents that contain important confidential or 
personal information. When a document is printed from a computer, this feature...

Default Setting (System Menu)
8-76
Checking Application Details
Use the procedure below to check the details of an application.
1Press the System Menu  key.
2Press [System] and then [Next] of  Optional Function.
NOTE: If user login administration is di sabled, the user authentication scre en appears. Enter your login user 
name and password and then press [Login]. For this, you  need to login with administrator privileges. Refer to 
Adding a User on page 11-5 for the default login user name and...

9-1
9 Maintenance
This chapter describes cleaning and toner replacement.
• Cleaning ............ ..................................................................................9-2
• Toner Container and Waste  Toner Box Replacement .........................9-7
Downloaded From ManualsPrinter.com Manuals 

Maintenance
9-2
Cleaning
Clean the machine regularly to ensure optimum output quality.
CAUTION: For safety, always unplug the power cord before cleaning the machine.
Original Cover / Glass Platen
Wipe the backside of the original cover, the inside of the document processor and the glass platen with a soft 
cloth dampened with alcohol or mild detergent.
IMPORTANT:  Do not use thinner or other organic solvents.
Original Cover
Glass Platen
Downloaded From ManualsPrinter.com Manuals