Kyocera TASKalfa 300i User Manual

Default Setting (System Menu)
8-59
8
5To set the text size, press [Change] of Text Size, select [Large], [Medium] or [Small] as the text size and 
then press [OK].
6To set the display mode, press [Change] of  Display Mode, select [Normal], [Just-Fit Rendering] or [Smart-
Fit Rendering] as the display mode and then press [OK].
7To specify the settings for accepting cookies, press [Change] of  Cookie, select [Accept All], [Reject All] or 
[Prompt before Accepting] as your cook ie acceptance policy and then...

Default Setting (System Menu)
8-60
Applications
You can install and use applications that will make your day-to-day use of this machine more efficient.
Installing Applications
You can install new applications. 
Use the procedure below to install an application.
1Insert the USB memory containing the application to  be installed into the USB memory slot (A1). 
NOTE: If Removable Memory is recognized. Displaying files.  appears, press [No].
2Press the System Menu  key.
3Press [ ] and then [Application]....

Default Setting (System Menu)
8-61
8
Activating/Deactivating Application
To use an application, set the application to Activate. 
Use the procedure below to start using an application.
1Press the  System Menu  key.
2Press [ ] and then [Application].
NOTE: If user login administration is di sabled, the user authentication scre en appears. Enter your login user 
name and password and then press [Login]. For this, you  need to login with administrator privileges. Refer to 
Adding a User on page 11-5 for the...

Default Setting (System Menu)
8-62
Deleting Applications
Use the procedure below to delete an installed application.
IMPORTANT: Always exit the application to be deleted before deleting the application. (Refer to Activating/
Deactivating Application on page 8-61 .)
1Press the System Menu  key.
2Press [ ] and then [Application].
NOTE: If login administration is disabled, the user authentication screen appears. Enter your login user name 
and password and then press [Login]. For this, you need  to login...

Default Setting (System Menu)
8-63
8
System Initialization
Initialize the hard disk mounted on the machine to return to the default mode.
CAUTION: System initialization will erase Custom Document Boxes, data stored in Document Box, addresses 
in the Address Book, user property, account information, and settings.
NOTE: This item will not be displayed if the optional Data Security Kit is installed. Refer to the Data Security 
Kit (E) Operation Guide on the bundled CD-ROM about the functions added when the...

Default Setting (System Menu)
8-64
Network Setup
The following network settings are available.
• Checking Host Name …8-64
• TCP/IP (IPv4) Setup …8-64
• TCP/IP (IPv6)  Setup …8-64
• Protocol Detail …8-66
• NetWare Setup …8-67
• AppleTalk Setup …8-68
• WSD Scan  Setup …8-68
• WSD Print Setup …8-68
• Secure Protocol …8-69
• IPSec Setting …8-71
• LAN Interface Setup …8-71
Checking Host Name
Check the host name of the machine. Use the procedure below.
1Press the  System Menu  key.
2Press [System], [Next] of...

Default Setting (System Menu)
8-65
8
Manual Setting (IPv6)
Manually specify the IP address, prefix length, and gateway address of TCP/IP (IPv6). The manual setting is 
available when selecting [On] for TCP/IP (IPv6). Use the procedure below.
1Press the  System Menu  key.
2Press [System], [Next] of  Network and then [Next] of  TCP/IP Setting.
3Press [Next] of  IPv6.
4Press [Next] of  Manual Setting.
5Press [IP Address (Manual)] to enter IP address. The format of the IPv6 address is a sequence of numbers...

Default Setting (System Menu)
8-66
5Press [On] or [Off] of DHCP. When selecting [On],  IP Address (Stateful) appears.
6Press [OK].
7After changing the setting, re start the system or turn the ma chine OFF and then ON again. 
For detailed information on restarting the system, refer to  Restarting the System on page 8-63.
Protocol Detail
The table below lists the network related function settings. The network re lated functions are available when 
TCP/IP  is On.
Item Description Default 
SettingRestarting...

Default Setting (System Menu)
8-67
8Use the procedure below.
The following procedure is an example for specifying the SMTP (E-mail TX) settings.
1Press the System Menu  key.
2Press [System] and then [Next] of  Network to display the network settings screen.
3Display the item you want to set and press [Change] for that item. 
In this example, press [Change] of  SMTP (E-mail TX).
4Press [On] or [Off].
5Press [OK].
6After changing the setting, restart the system or turn the ma chine OFF and then ON again....

Default Setting (System Menu)
8-68
5Press [OK].
6After changing the setting, restart the system or turn the ma chine OFF and then ON again. 
For detailed information on restarting the system, refer to  Restarting the System on page 8-63.
AppleTalk Setup
Select the Apple Talk network connection.
Refer to AppleTalk Setup on page 2-16  about the procedures.
WSD Scan Setup
Select whether or not to use WS D Scan. The default setting is On. Use the procedure below.
1Press the  System Menu  key.
2Press...