Kyocera TASKalfa 250ci User Manual

Copying Functions 
OPERATION GUIDE4-25
4
Margin/Centering Mode
Shift the original image to make space on the copy for binding on the left (right) or top (bottom) side.
When you copy onto paper different from the original size, you can center the original image on the paper.
The following margin  widths are available.
Margin on the Back Side
When duplex copying, you can also specify the margin on the back side.
Auto
When [Auto] is selected, an appropriate margin is applie d automatically on the rear page...

Copying Functions 
4-26OPERATION GUIDE
If you selected [Auto], press [OK]. If you pressed 
[Manual], enter the margins in the displayed screen 
and then press [OK].
Press [Centering] to center the original image on 
the paper.
5Press [Original Orientation] to choose orientation of 
the originals, either [Top Edge Top] or [Top Edge 
Left]. Then press [OK].
6Press [OK].
7Press the 
Start key to start copying.
Status 10/10/2008    10:10
Ready to copy.Copies
Cancel OK
Margin/Centering - Back Page
Place...

Copying Functions 
OPERATION GUIDE4-27
4
Border Erase
Use Border Erase to remove black shadows that appear around the outside of the original when making copies. 
The following options can be selected.
Border Erase Sheet
Erases black borders around the single sheet original.
Border Erase Book
Erases black borders around the edges and in the 
middle of the original such as a thick book. You can 
specify the widths individually to erase the borders 
around the edges and in the center of the book....

Copying Functions 
4-28OPERATION GUIDE
Border Erase to Back Page
When scanning a 2-sided original, this allows you to erase the borders on the back of the original. The table 
below shows the available settings.
NOTE: You can change the default setting for Border Erase to Back Page. For details, refer to  Paper 
Selection on page 8-33.
Use the procedure below to erase borders when copying.
1Press the  Copy key.
2Place the originals on the platen.
3Press [Layout/Edit] and then [Border Erase].
4Select...

Copying Functions 
OPERATION GUIDE4-29
4
Booklet from Sheets
The Booklet copying option allows you to copy sheet originals and produce booklets such as small brochures 
or pamphlets. A booklet, such as a maga zine, is made by folding at the center.
You can copy the cover page onto colored paper or thick paper. Paper for the cover is supplied from the multi 
purpose tray. To feed the cover pa per from the cassette, refer to Paper Source for Cover Paper on page 8-12.
NOTE: Using the optional 3,000 sheet...

Copying Functions 
4-30OPERATION GUIDE
For binding on the right side
The folded copies can be read from right to left.
For top binding
The folded copies can be read from top to bottom.
The procedure for using Bookle t copying is explained below.
1Press the Copy key.
2Place the originals on the platen.
3Press [Layout/Edit] and then [Booklet].
4Press [1-sided>>Booklet] to produce a booklet 
from single-sided originals.
Press [2-sided>>Booklet] to produce a booklet 
from two-sided originals.
Press...

Copying Functions 
OPERATION GUIDE4-31
4
7Press [Original Orientation] to choose orientation of 
the originals, either [Top Edge Top] or [Top Edge 
Left]. Then press [OK].
8If the optional 3,000 sheet document finisher and 
folding unit are installed, the [Saddle Stitch] option 
is displayed.
To use saddle stitching, press [Saddle Stitch] and 
then press [Bind and Fold]. You can saddle stitch 
up to 16 sheets (64 pages).
9Press [OK].
10Platen and press the  Start key. Copying begins.
NOTE: When using the...

Copying Functions 
4-32OPERATION GUIDE
Cover Mode
Add a cover to the finished copies. You can copy the first page and/or the last page onto colored paper or thick 
paper fed from the different paper source than the regul ar one. The following two options are available. Paper 
for the cover is supplied from the multi purpose tray.
To feed the cover paper from the cassette, refer to Paper Source for Cover Paper on page 8-12 .
The procedure for using Cover mode copying is explained below.
1Press the  Copy...

Copying Functions 
OPERATION GUIDE4-33
4
Form Overlay
Copy the original images onto the form. Once you scan 
and register the form, the form is overlaid onto the 
original. You can also use a form that is already 
registered in the machines memory.
NOTE: To register a form in advance, refer to Form for 
Form Overlay Box on page 6-18 for details.
Follow the steps as below for form overlay.
1Press the  Copy key.
2Press [Layout/Edit] and then [Form Overlay].
3Press [Scan New Form] to  use the first page of...

Copying Functions 
4-34OPERATION GUIDE
Page Numbering
Number multiple pages of originals in sequential order. The formats for numbering are [-1-], [P.1] or [1/n]. The 
format [1/n] prints the total number of pages in the place of  n.
Select  Top Left,  Top Middle , Top Right , Bottom Left , Bottom Middle or  Bottom Right as the page numbering 
position.
Use the procedure below to insert page numbers on your copies.
1Press the  Copy key.
2Place the originals in the document processor or on 
the platen....