Kyocera TASKalfa 250ci User Manual

Copying Functions 
OPERATION GUIDE4-15
4
Single Color Copy
Specify one of Cyan, Magenta, Yellow, Red, Green, or Blue, and produce copies with that color regardless of 
original type.
Follow the steps as below for Single Color Copy.
1Press  Copy key.
2Place the originals on the platen.
3Press [Color/Image Quality], [Color Selection] and 
then press [Single Color].
4Select color for copying from [Cyan], [Magenta], 
[Yellow], [Red], [Green] or [Blue].
5Press [OK].
6Press the  Start key. Copying begins....

Copying Functions 
4-16OPERATION GUIDE
Color Balance Adjust
Adjust the strength of cyan, magenta, yellow, and black to make fine hue adjustments.
NOTE: This feature is used with full color copying.
This feature can not be used together with Adjusting Density (see  page 3-14).
This feature can not be used togethe r with One touch Image Adjust (see page 4-19).
Refer to the sample image in  Quick Guide to Adjusting Image Quality.
Follow the steps below to  adjust color balance.
1Press Copy key.
2Place the...

Copying Functions 
OPERATION GUIDE4-17
4
Hue Adjustment
Adjust the color (hue) of images. Make adjustments such as adjusting red to a strong yellow-red or yellow to a 
strong green-yellow to make more creative copies.
The items that may be configured are as follows.
•All: Adjust hue for all colors.
• Yellow - Green & Blue - Magenta : Adjust color 
balance for yellow and green, and blue and 
magenta.
• Green - Cyan & Magenta - Red : Adjust color 
balance for green and cyan, and magenta and red.
• Cyan -...

Copying Functions 
4-18OPERATION GUIDE
Example 1
Select [Yellow - Green & Blue - Magenta], and 
press [ ] to adjust yellow closer to green, and blue 
closer to magenta.
Example 2
Select [Cyan - Blue & Re
d - Yellow], and press [ ] 
to adjust yellow closer to red , and blue closer to 
cyan.
5Press [OK].
6Press the  Start key. Copying begins.
Yellow
Green
Blue
Red
Magenta Cyan
Yellow
Green
Blue
Red
Magenta Cyan
Downloaded From ManualsPrinter.com Manuals 

Copying Functions 
OPERATION GUIDE4-19
4
One-touch Image Adjust
Adjust images as desired to more vivid or more dull images.
The items that may be configured are as follows: Vivid, Dull,  Sharp, Smooth , Light , Dark
Refer to the sample image in Quick Guide to Adju sting Image Quality for examples of the effect of each setting.
NOTE: This feature is used with full color copying.
This feature can not be used together with Adjusting Density (see  page 3-14).
This feature can not be used togethe r with Color...

Copying Functions 
4-20OPERATION GUIDE
Sharpness Adjust
Adjust the sharpness of image outlines. When copying penciled originals with rough or broken lines, clear copies 
can be taken by adjusting sharpness toward [Sharpen]. When copying images made up of patterned dots such 
as magazine phots, in which moire
† patterns appear, edge softening and weakening of the moire effect can be 
obtained by setting the sharpness toward [Unsharpen].
Refer to the sample image in  Quick Guide to Adjusting Image...

Copying Functions 
OPERATION GUIDE4-21
4
Background Density Adjust
Lightens the background of color originals with dark 
backgrounds.
NOTE: This feature is used with full color and auto 
color copying. Background Density Adjust is disabled 
during auto color copying when the a black & white 
original has been detected.
Follow the steps below to use background density adjust.
1Press  Copy key.
2Place the originals on the platen.
3Press [Color/Image Quality] and then press 
[Background Density Adj.]....

Copying Functions 
4-22OPERATION GUIDE
Combine Mode
This mode allows you to copy 2 or 4 originals combined onto a single page. 2-in-1 mode or 4-in-1 mode. The 
page boundary of each original can be indicated.
NOTE: Combine mode is available for the copy paper sizes of A3, B4, Folio, A4, A4-R, B5, B5-R, A5-R, 
Ledger, Legal, Oficio II, 8.5×13.5, Letter, Letter-R, Statement-R, 8K, 16K and 16K-R.
2-in-1 Mode
For copying two originals onto a single sheet. This mode  can be used with Duplex mode to copy four...

Copying Functions 
OPERATION GUIDE4-23
4
4-in-1 Mode
For copying four originals onto a single sheet. This mode can be used with Duplex mode to copy eight originals 
onto one sheet.
The following 4-in-1 options and output orientations are available.
NOTE: When placing the original on the platen, be sure to copy the originals in page order.
Types of Page Boundary Lines
The following types of the boundary lines are available.
The procedure for using Combine mode copying is explained below.
1Press the  Copy...

Copying Functions 
4-24OPERATION GUIDE
3Press [Layout/Edit] and then [Combine].
4Press [2 in 1] or [4 in 1], and choose the page layout 
of Layout.
5Press [Border Line] to choose the type of the lines 
to indicate page boundaries. Press [OK].
6Press [Original Orientation] to choose orientation of 
the originals, either [Top Edge Top] or [Top Edge 
Left]. Then press [OK].
7Press [OK].
8Press the Start key. Copying begins.
If the original is placed on the platen, replace the 
original and press the  Start...