Kyocera TASKalfa 221 User Manual

Printer Settings2-45
Paper Handling
You can set the following items for paper.
• Multi Purpose Tray Mode
• Paper Source
• Duplex Print Mode
• Output Destination
• Override A4/Letter
How to Display the Paper Handling Screen
1Press the Printer key.
2Press the  S key or the  T key to select MENU .
3Press the Enter key.
4Press the  S key or the  T key to select Paper 
Handling.
5Press the  Enter key. The  Paper Handling  screen is displayed.
Next, perform the setting referri ng to the following description...

Printer Settings
2-46
Paper Source
Set the paper source to be selected first.
1Display the Paper Handling  screen. (See How to Display the Paper Handling Screen  on 
page 2-45.)
2Press the  S key or the  T key to select  Feed Select .
3Press the Enter key.
4Press the  S key or the  T key to select the desired 
paper source.
5Press the  Enter key.
6Press the  Reset key. The message display retu rns to the printer basic screen.
Duplex Print Mode
Set the binding position on finished prints in duplex...

Printer Settings2-47
3Press the Enter key.
4Press the  S key or the  T key to select Short edge 
bind or  Long edge bind.
5Press the  Enter key.
6Press the  Reset key. The message display returns to the printer basic screen.
Output Destination
Set the paper output destination.
NoteThis item is displayed only if the optional finisher or job separator is installed.
1Display the  Paper Handling  screen. (See How to Display the Pa per Handling Screen on 
page 2-45.)
2Press the  S key or the  T key to select...

Printer Settings
2-48
4Press the S key or the  T key to select  On or  Off .
5Press the  Enter key.
6Press the  Reset key. The message display retu rns to the printer basic screen.
Back
On
Override A 4/LT
Off
Downloaded From ManualsPrinter.com Manuals 

Printer Settings2-49
Other Settings
You can set the following items for other settings.
• Form Feed Timeout
• Received Data Dump
• Printer Function Resetting
• Resource Protect Mode
• Auto Continue
• Duplex Printing Error Detection
• Stapling Error Detection
• Service Status Page Printing
How to Display the Others Screen
1Press the Printer key.
2Press the  S key or the  T key to select MENU .
3Press the Enter key.
4Press the  S key or the  T key to select Others .
5Press the Enter key. The  Others screen...

Printer Settings
2-50
6Press the Reset key. The message display retu rns to the printer basic screen.
Received Data Dump
You can print data received by this machine as hexadecimal codes for debugging programs and 
files.
1Display the Others screen. (See  How to Display the Others Screen on page 2-49.)
2Press the  S key or the  T key to select  Print 
HEX-DUMP .
3Press the Enter key.
4Press the  S key or the  T key to select  OK.
5Press the  Enter key. Waiting  is displayed and the message disp lay...

Printer Settings2-51
Resource Protect Mode
The resource protect mode protects the resource  data such as downloaded fonts and macros and 
memorizes the PCL resources even if the em ulation mode is switched. If you select Permanent, 
temporary resources are not  protected. If you select Perm/Temp, however, temporary resources 
are also protected.
1Display the  Others screen. (See  How to Display the Others Screen  on page2-49.)
2Press the  S key or the  T key to select Resource 
Prot.
3Press the  Enter...

Printer Settings
2-52
3Press the Enter key.
4Press the  S key or the  T key to select  On or  Off .
5Press the  Enter key. If you have selected  On, Change #  is displayed.
6To set the time that elapses before auto continue is 
activated, press the  S key or the  T key to select 
Change #.
7Press the  Enter key. The  Auto Continue (time)  screen is displayed.
8Press the < key or the  > key to input the time. You can 
set the time to 0 to 495 seconds in 5 second 
increments.
9Press the  Enter key.
10Press...

Printer Settings2-53
6Press the S key or the  T key to select On or  Off.
7Press the  Enter key.
8Press the  Reset key. The message display returns to the printer basic screen.
Stapling Error Detection
You can select whether or not to display  Add Staples and Press GO when staples have run out 
while stapling is performed.
NoteThis setting is displayed only if the optional finisher is installed.
1Display the  Others screen. (See  How to Display the Others Screen  on page2-49.)
2Press the  S key or the  T...

Printer Settings
2-54
Service Status Page Printing
The service status page contains more detailed printer setting information than the normal status 
page. This page is mainly used by the serv ice personnel for maintenance. Use the following 
procedure to print this page as needed.
1Display the  Others screen. (See  How to Display the Others Screen on page 2-49.)
2Press the  S key or the  T key to select  Service.
3Press the Enter key.
4Press the  S key or the  T key to select  Print 
Status Page ....