Kyocera TASKalfa 221 User Manual

Printer Settings2-15
Interface
This machine is equipped with a parallel interface,  USB interface, and network interface as standard 
components.
How to Display the Interface Screen
1Press the  Printer key.
2Press the  S key or the  T key to select MENU .
3Press the Enter key.
4Press the  S key or the  T key to select Interface.
5Press the  Enter key. The  Interface screen is displayed.
Next, perform the setting referri ng to the following description of each setting item.
Network Setting
To perform...

Printer Settings
2-16
8Press the S key or the  T key to select  Change #.
9Press the Enter key.
10Press the  S key or the  T key to select the frame 
mode.
11Press the  Enter key.
12Press the  Reset key. The message display retu rns to the printer basic screen.
EtherTalk
When using this machine by connecting to  an Apple Macintosh computer, turn EtherTalk  On.
1Display the Interface screen.
2Press the S key or the  T key to select  Network.
3Press the Enter key.
4Press the  S key or the  T key to select...

Printer Settings2-17
TCP/IP
When connecting to a Windows network through TCP/IP, turn TCP/IP  On.
1Display the Interface screen.
2Press the S key or the  T key to select Network .
3Press the Enter key.
4Press the  S key or the  T key to select TCP/IP .
5Press the Enter key.
6Press the  S key or the  T key to select On.
7Press the  Enter key. 
DHCP
This machine supports DHCP (Dynamic Host Conf iguration Protocol). When using DHCP, turn 
DHCP  On.
1Display the  TCP/IP screen referring to steps 1 to 5 of...

Printer Settings
2-18
IP Address
Register the IP address of this machine.
Notes• To obtain the IP address to enter, check with your network administrator before performing this setting.
• Before entering the IP address by following the  instructions below, be sure to turn the DHCP 
setting  Off and the TCP/IP setting On.
1Display the  TCP/IP screen referring to steps 1 to 5 of  TCP/IP setting.
2Press the  S key or the  T key to select  Change #.
3Press the Enter key.
4Press the  S key or the  T key to...

Printer Settings2-19
4Press the Enter key.
Next, set the default gateway.
Default Gateway
To register the default gateway, contin ue the procedure from step 4 above.
1Press the S key or the  T key to select Gateway .
2Press the Enter key.
3Use the same procedure as steps 6 to 8 of  IP Address 
setting to input the address.
4Press the  Enter key.
5When you finish making all of the setting, press the  Reset key. The message di splay returns to the 
printer basic screen.
Network Status Page Printing
When...

Printer Settings
2-20
Emulation
NoteYou can set the emulation for each interface.
Emulation Mode Selection
Emulation modes that can be used with this machine: PCL6, KC-GL , KPDL,  KPDL (AUTO) , Line 
Printer , IBM Proprinter , Diablo 630,  EPSON LQ-850 
If you set KC-GL , you can set the thickness of the pen and the page size.
If you set KPDL (AUTO), switching between KPDL and an alternative emulation mode will be 
automatically performed according to the print data.
If you set  KPDL or KPDL (AUTO), the...

Printer Settings2-21
KC-GL Pen Thickness
If you have selected the KC-GL emulation, you ca n set the thicknesses of the eight pens and the 
page size. Continue the procedure from step 9 of  Emulation Mode Selection to set these items as 
shown below.
1Press the  S key or the  T key to select KC-GL Pen 
Adjust.
2Press the  Enter key.
3Press the  S key or the  T key to select the pen to set.
4Press the  Enter key.
5Press the  < key or the  > key to input the thickness 
(number of dots).
6Press the  Enter...

Printer Settings
2-22
KPDL Error Printing
The details of any error that occurs during printing in the KPDL emulation mode can be printed. 
Continue the procedure from step 9 of  Emulation Mode Selection  to set this item as shown below.
1Press the S key or the  T key to select  Print KPDL 
Errs .
2Press the  Enter key.
3Press the  S key or the  T key to select  On or  Off . If 
you set  On, the details of any error will be printed.
4Press the  Enter key.
5Press the  Reset key. The message display retu...

Printer Settings2-23
Font
You can select the default font for  the current interface. The default font can be one of the internal 
fonts or a font stored in the optional memory card.
You can set the following items for fonts.
• Font Selection
• Font Size
• Courier/Letter Gothic Font Character Pitch
• Courier/Letter Gothic Font Setting
• Code Set Selection
• Font List Printing
NoteYou can set the font for each interface.
How to Display the Font Screen
1Press the  Printer key.
2Press the  S key or the  T...

Printer Settings
2-24
4Press the S key or the  T key to select the font ID.
5Press the  Enter key. The font number is displayed.
Characters displayed before font numbers indicate the 
following items.
6Press the  < key or the  > key to input the font number. For internal font numbers, see  Font List 
Printing  on page2-26.
7Press the  Enter key.
8Press the  Reset key. The message display retu rns to the printer basic screen.
Font Size
If you have selected a proportional font as the def ault font, you can...