Konica Minolta bizhub C35 User Manual

Clearing Media Misfeeds 13-6
Clearing Media Misfeeds 
To avoid damage, always remove misfed media gently, without tearing it. Any 
piece of media left in the machine, whether large or small, can obstruct the 
media path and cause further misfeeds. Do not reload media that has misfed.
Note
The image is not fixed on the media before the fusing process. If you 
touch the printed surface, the toner may stick to your hands, so be 
careful not to touch the printed face when removing the misfed media. 
Make...

Clearing Media Misfeeds13-7
Clearing a Media Misfeed in Tray 2
1Pull the lever, and then open the 
right door.
Before opening the right 
door, fold up Tray 1.
2Carefully pull out the misfed 
media.
Downloaded From ManualsPrinter.com Manuals 

Clearing Media Misfeeds 13-8
CAUTION
The area around the fuser unit is 
extremely hot.
Touching anything other than the 
indicated levers may result in 
burns. If you get burned, 
immediately cool the skin under 
cold water, and then seek 
professional medical attention.
Note
Decreased print quality may 
result if the surface of the image 
transfer belt or the transfer roller 
is touched.
Be careful not to touch the 
surface of the image transfer belt 
or transfer roller. 
Downloaded From...

Clearing Media Misfeeds13-9
3Close the right side door.
4Pull out Tray 2, and then remove 
all media from the tray. 
5Fan the media you removed and 
then align it well.
Downloaded From ManualsPrinter.com Manuals 

Clearing Media Misfeeds 13-10
6Load the media face up in Tray 2.
Make sure that the media is flat.
Do not load paper above the  mark. 
Slide the media guides against the edges of the paper.
7Close Tray 2.
Downloaded From ManualsPrinter.com Manuals 

Clearing Media Misfeeds13-11
Clearing a Media Misfeed in Tray 3/4
1Open the right side cover of 
Tray 3 or Tray 4.
Before opening the right 
side cover of Tray 3 or 
Tray 4, fold up Tray 1.
2Carefully pull out the misfed 
media.
3Close the right side cover of 
Tray 3 or Tray 4.
Downloaded From ManualsPrinter.com Manuals 

Clearing Media Misfeeds 13-12
4Pull out Tray 3 or Tray 4, and 
then remove all paper from the 
tray.
5Fan the paper you removed and 
then align it well.
6Load the paper face up in Tray 3 or Tray 4.
Make sure that the paper is flat.
Do not load paper above the  mark.
Slide the media guides against the edges of the paper.
7Close Tray 3 or Tray 4.
Downloaded From ManualsPrinter.com Manuals 

Clearing Media Misfeeds13-13
Clearing a Media Misfeed from the ADF
1Open the ADF feed cover.
2Remove the document from the 
ADF document feed tray.
3Lift to open the ADF cover.
Downloaded From ManualsPrinter.com Manuals 

Clearing Media Misfeeds 13-14
4Remove any misfed media.
5Close the ADF cover.
6Close the ADF feed cover.
Downloaded From ManualsPrinter.com Manuals 

Clearing Media Misfeeds13-15
Clearing a Media Misfeed from the Duplex
1Pull the lever, and then open the 
right door.
Before opening the right 
door, fold up Tray 1.
2Carefully pull out the misfed 
media.
3Close the right door.
Downloaded From ManualsPrinter.com Manuals