Konica Minolta bizhub C35 User Manual

Working Table WT-P01 14-8
2Tighten the screws (c) tempo-
rarily.
3Install the working table.
c
1
a
Downloaded From ManualsPrinter.com Manuals 

Working Table WT-P0114-9
4Using a coin, tighten the screws 
(c).
5Using a coin, tighten the screws 
(d).
d
Downloaded From ManualsPrinter.com Manuals 

Working Table WT-P01 14-10
Downloaded From ManualsPrinter.com Manuals 

15
Authentication
device (IC card
type)
Downloaded From ManualsPrinter.com Manuals 

Using authentication device (IC card type) 15-2
Using authentication device (IC card type)
The authentication device (IC card type) is an IC card authentication system 
that reads the IC card to perform personal authentication. Using this system, 
you can perform authentication with an IC card to log in to this machine or 
execute a print job when User Authentication is enabled in this machine.
To use the authentication device, first register the card ID of the user in this 
machine. The registered user,...

Configuring this machine15-3
2In [User Authentication], select [Device].
3Click [Apply] to save the settings.
4In the [General Settings] page of [Authentication Device Settings], select 
[Authentication Type] and [IC Card Type].
–In [IC Card Type], specify the required IC card type.
–For [Authentication Type], specify how to log in to this machine after 
registration.
[Card Authentication]: Allows the user to log in by simply placing the 
IC card.
[Card Authentication + Password]: Allows the user to log...

Registering a user 15-4
5Click [Apply] to save the settings
–If the card function setting page appears, specify the necessary set-
tings.
6Exit PageScope Web Connection.
Then, proceed with the user registration.
Registering a user
Register a user using Data Administrator. The following two methods can be 
used.
„Connect the authentication device to your computer, and use Data Admin-
istrator to register the target user and card at a time.
„Connect the authentication device to this machine, and associate...

Registering a user15-5
3In [Plug-in information list], confirm the plugin version of Data Administra-
tor.
–This software is available if the plugin version is 4.x.
Setup
1Turn the Main Power Switch of this machine off, and disconnect the 
authentication device from this machine.
2Install IC Card Driver (USB-Driver).
Connect the authentication device to the USB port of your computer.
The [Found New Hardware] dialog box appears.
Downloaded From ManualsPrinter.com Manuals 

Registering a user 15-6
3Select [Locate and install driver software (recommended)].
4Insert the application CD-ROM provided with the authentication device 
into the CD-ROM drive of the computer.
5Click the [Browse my computer for driver software (advanced)].
Downloaded From ManualsPrinter.com Manuals 

Registering a user15-7
6Check that the drivers search location is the application CD-ROM, and 
then click [Next].
–When the drivers search location is not the application CD-ROM, click 
[Browse]. Select the IC Card Driver (USB-Driver) folder in the 
CD-ROM, and click [OK].
Downloaded From ManualsPrinter.com Manuals