Konica Minolta bizhub C35 User Manual

Antistatic Protection 11-38
Antistatic Protection
Note
It’s very important to protect the printer controller board from 
electrostatic damage while performing any task involving the controller 
board.
Turn off all power switches first. If an antistatic wrist strap is provided in 
your printer option kit, attach one end of it to your wrist and the other 
end to the bare metal chassis on the back of your printer. Never attach 
the wrist strap to any piece of equipment with an electrical current 
present....

12
Maintenance
Downloaded From ManualsPrinter.com Manuals 

Maintaining the machine 12-2
Maintaining the machine
CAUTION
Read all caution and warning labels carefully, making sure to follow any 
instructions contained in them. These labels are located on the inside of 
the machine’s covers and the interior of the machine body.
Handle the machine with care to preserve its life. Abuse handling may cause 
damage and void your warranty. If dust and paper scraps remain on the 
inside or outside of the machine, machine performance and print quality will 
suffer, so the...

Maintaining the machine12-3
„Do not cover the machine immediately after using it. Turn it off and wait 
until it cools down.
„Do not leave the machine’s covers open for any length of time, especially 
in well-lit places; light may damage the imaging units.
„Do not open the machine during printing.
„Do not tap media stacks on the machine.
„Do not lubricate or disassemble the machine.
„Do not tilt the machine.
„Do not touch the electrical contacts, gears, or laser devices. Doing so may 
damage the machine...

Cleaning the machine 12-4
Cleaning the machine
CAUTION
Be sure to turn off the machine and unplug the power cord before 
cleaning.
Exterior
Control PanelVentilation Grill
Machine Exterior
Original GlassOriginal Cover Pad
Downloaded From ManualsPrinter.com Manuals 

Cleaning the machine12-5 Media Rollers
The accumulation of paper dust and other debris on the media rollers can 
cause media-feeding problems. 
Cleaning the Media Feed Rollers (Manual Feed Tray)
1Open Tray 1.
2Press down on the center of the 
paper-lifting plate until the left 
and right locking tabs (white) 
lock into place.
Downloaded From ManualsPrinter.com Manuals 

Cleaning the machine 12-6
3Clean the media feed rollers by 
wiping them with a soft, dry 
cloth.
4Close the tray.
Downloaded From ManualsPrinter.com Manuals 

Cleaning the machine12-7
Cleaning the Media Feed Rollers for Tray 2/3/4
1Pull out the tray.
2Clean the media feed rollers by 
wiping them with a soft, dry 
cloth.
3Close the tray.
Downloaded From ManualsPrinter.com Manuals 

Cleaning the machine 12-8
Cleaning the Media Transfer Rollers for Tray 3/4
1Open the right side cover of 
Tray 3 or Tray 4.
Before opening the right 
side cover of Tray 3 or 
Tray 4, fold up Tray 1.
2Clean the media transfer rollers 
by wiping them with a soft, dry 
cloth.
3Close the right side cover of 
Tray 3 or Tray 4.
Downloaded From ManualsPrinter.com Manuals 

Cleaning the machine12-9
Cleaning the Media Feed Rollers for the ADF
1Open the ADF feed cover.
2Clean the media feed rollers by 
wiping them with a soft, dry 
cloth.
3Close the ADF feed cover.
Downloaded From ManualsPrinter.com Manuals