Konica Minolta bizhub C35 User Manual

Replacing Consumables 11-18
3Grab the left and right handles of 
the waste toner bottle, and then 
slowly pull out the bottle.
Do not tilt removed waste 
toner box, otherwise 
waste toner may spill.
4Remove the new waste toner bottle from its packaging. Insert the used 
waste toner bottle into the plastic bag included in the box, and then box it 
up.
Note
Dispose of the used waste toner bottle according to your local 
regulations. Do not burn the waste toner bottle.
5Press in on the waste toner bot-
tle...

Replacing Consumables11-19
6Close the front cover.
When closing the front 
cover, press the area of 
the cover with small pro-
jections.
If the waste toner bottle is not fully inserted, the front cover cannot 
be closed.
Downloaded From ManualsPrinter.com Manuals 

Replacing Consumables 11-20
Replacing the Transfer Roller
When the time to replace the transfer roller is reached, the message [Replace 
transfer roller unit.] appears. Printing can continue even after this message 
appears; however, since the print quality is reduced, the transfer roller should 
be replaced immediately.
1Pull the lever, and then open the 
right door.
Before opening the right 
door, fold up Tray 1.
2While pushing the levers to the 
inside, move the roller presser 
toward you....

Replacing Consumables11-21
3While continuing to press the 
levers, remove the transfer 
roller.
4Prepare a new transfer roller.
5While pressing the levers, insert 
the shaft of the transfer roller 
into the bearings.
6Move the levers away from you 
until it snaps into place.
Downloaded From ManualsPrinter.com Manuals 

Replacing Consumables 11-22
7Close the right door.
8Reset the counter in the [Admin Settings]/[Maintenance Menu]/[Supplies]/
[Consumables Replace]/[Transfer Roller Unit] menu.
Replacing the Transfer Belt Unit
When the time to replace the transfer belt unit is reached, the message 
[Replace image transfer belt.] appears. Printing can continue even after this 
message appears; however, since the print quality is reduced, the transfer 
belt unit should be replaced immediately.
1Turn off the machine and...

Replacing Consumables11-23
2Open the machine’s front cover.
3Remove the all toner cartridges, 
all imaging units and waste toner 
bottle.
For details on removing 
the toner cartridges, 
imaging units or waste 
toner bottle, refer to 
“Replacing a Toner Car-
tridge” on page 11-4 or 
“Replacing a Imaging 
Unit” on page 11-9.
Cover the removed imag-
ing unit to protect it from direct sunlight.
Do not tilt removed toner cartridge, otherwise toner may spill.
Do not tilt removed waste toner box, otherwise...

Replacing Consumables 11-24
4Pull the lever, and then open the 
right door.
Before opening the right 
door, fold up Tray 1.
5Remove the top part of the right 
door.
6Insert the protective sheet into 
the unit in the direction of the 
arrow until it stops.
Downloaded From ManualsPrinter.com Manuals 

Replacing Consumables11-25
7Push down the guides.
8Hold the handles, and then care-
fully pull out the transfer belt 
unit.
Be sure to keep the 
transfer belt level; other-
wise, the transfer belt 
may be scratched.
9Prepare a new transfer belt unit.
Be careful not to touch 
the surface of the belt.
Do not remove the blue 
lever.
Downloaded From ManualsPrinter.com Manuals 

Replacing Consumables 11-26
10Remove the protective cover 
from the new transfer belt unit.
11Insert the new transfer belt unit 
along the rails.
Fully insert it until it locks 
into place.
Be sure to keep the 
transfer belt level; other-
wise, the transfer belt 
may be scratched.
12Push up the guides.
Downloaded From ManualsPrinter.com Manuals 

Replacing Consumables11-27
13Pull out the protective sheet.
14Install the top part of the right 
door.
15Close the right door.
Downloaded From ManualsPrinter.com Manuals