Konica Minolta bizhub 40P User Manual
Have a look at the manual Konica Minolta bizhub 40P User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 61 Konica manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Configuration Menu Overview 71 HOLD JOB TIME OUTSettingsDISABLE/1 hour/4 hours/1 day/ 1 week Specify the length of time until print jobs saved on the hard disk are deleted. If DISABLE is selected, print jobs are not deleted at a specific time. ENERGY SAVER TIMESettings5 minutes/6 minutes/7 minutes/8 minutes/9 minutes/10 minutes/11 minutes/12 minutes/13 minutes/14 minutes/15 minutes/30 minutes/1 hour Specify the length of time until the machine enters Energy Saver mode. MENU TIME OUTSettingsOFF/1 minute/2 minutes Specify the length of time until the status screen is displayed when no operation is performed while a menu or help screen is displayed in the message window. If OFF is selected, no timeout occurs. LCD CON- TRASTSettings-3/-2/-1/0/+1/+2/+3 Adjust the contrast of the message window. The darkest level setting is -3 and the brightest level setting is +3. SECU- RITYCHANGE PASS- WORDSpecify the password for locking the control panel. If the password is set to 0000 (default), the control panel is not locked. In order to lock the control panel, be sure to specify a password other than 0000. LOCK PANELSettingsOFF/MINIMUM/ON Specify how the control panel is locked. If OFF is selected, the control panel is not locked. If MINIMUM is selected, the INTERFACE MENU and SYS DEFAULT MENU are protected with a password. If ON is selected, all menus are protected with a password. In order to lock the control panel, be sure to specify a password other than 0000. Downloaded From ManualsPrinter.com Manuals
Configuration Menu Overview 72 CLOCK DATE (xx.xx. xx) Specify the date for the printer’s internal clock. The date for Asia and China is set in the order year, month, then day ( YY.MM.DD). The date for the Americas is set in the order month, day, then year ( MM.DD.YY). The date for Europe is set in the order day, month, then year ( DD.MM.YY). TIMESpecify the time for the printer’s internal clock. TIME ZONESettings-12:00-00:00-+13:00 Specify the time zone. HDD FORMATUSER AREA ONLYInitialize the user area of the hard disk. When this menu item is selected, the printer is automatically restarted. ALLInitialize the hard disk. When this menu item is selected, the printer is automatically restarted. CARD FORMATUSER AREA ONLYInitialize the user area of the CompactFlash card. When this menu item is selected, the printer is automatically restarted. ALLInitialize the CompactFlash card. When this menu item is selected, the printer is automatically restarted. RESTORE DEFAULTSRESTORE NETWORKReset the network settings to their defaults. When this menu item is selected, the printer is automatically restarted. RESTORE PRINTERReset the printer settings to their defaults. When this menu item is selected, the printer is automatically restarted. RESTORE ALLReset all settings to their defaults. When this menu item is selected, the printer is automatically restarted. Downloaded From ManualsPrinter.com Manuals
Configuration Menu Overview 73 ENABLE WARNINGPAPER EMPTYTRAY1SettingsON/OFF Select whether or not a warning appears when Tray 1 runs out of media. TRAY2SettingsON/OFF Select whether or not a warning appears when Tray 2 runs out of media. TRAY3SettingsON/OFF Select whether or not a warning appears when Tray 3 runs out of media. TRAY4SettingsON/OFF Select whether or not a warning appears when Tray 4 runs out of media. PAPER LOWTRAY2SettingsON/OFF Select whether or not to display a warning when Tray 2 is about to run out of media. TRAY3SettingsON/OFF Select whether or not to display a warning when Tray 3 is about to run out of media. TRAY4SettingsON/OFF Select whether or not to display a warning when Tray 4 is about to run out of media. TONER LOWSettingsON/OFF Select whether or not to display a warning when the toner is about to run out. Downloaded From ManualsPrinter.com Manuals
Configuration Menu Overview 74 MAINTENANCE MENU With this menu, maintenance on this printer can be performed. In order to use this menu, the administrator password must be entered. ALIGNMENTTOP ADJUSTMENTTRAY1-4 THICK MAINTENANCE MENU PRINT MENUEVENT LOG HALFTONE 64 HALFTONE 128 HALFTONE 256 GRADATION DUPLEX LEFT ADJUSTMENTLEFT ADJ TRAY 1-4 LEFT ADJ DUPLEX LD POWER VIDEO TIME LAG SUPPLIESREPLACEFUSER UNIT QUICK SET- TING*UPDATE SET- TING BACKUP SET- TING Downloaded From ManualsPrinter.com Manuals
Configuration Menu Overview 75 * This menu item appears only if a USB memory device is connected to the printer. All factory default values are shown in bold. PRINT MENUEVENT LOGSettingsPRINT/CANCEL Prints the event log. HALF- TONE 64SettingsPRINT/CANCEL Print halftones at 64 gradations. HALF- TONE 128SettingsPRINT/CANCEL Print halftones at 128 gradations. HALF- TONE 256SettingsPRINT/CANCEL Print halftones at 256 gradations. GRADA- TIONSettingsPRINT/CANCEL Prints the gradation. ALIGN- MENTTOP ADJUST MENTTRAY1Settings-8-0-7 When printing on media in Tray 1, specify the size of the top margin. TRAY2Settings-8-0-7 When printing on media in Tray 2, specify the size of the top margin. TRAY3Settings-8-0-7 When printing on media in Tray 3, specify the size of the top margin. TRAY4Settings-8-0-7 When printing on media in Tray 4, specify the size of the top margin. THICKSettings-8-0-7 When printing on thick paper, specify the size of the top margin. DUPLEXSettings-8-0-7 When printing on media using duplex pass, specify the size of the top margin. Downloaded From ManualsPrinter.com Manuals
Configuration Menu Overview 76 LEFT ADJUST MENTLEFT ADJ TRAY1Settings-8-0-7 When printing on media in Tray 1, specify the size of the left margin. LEFT ADJ TRAY2Settings-8-0-7 When printing on media in Tray 2, specify the size of the left margin. LEFT ADJ TRAY3Settings-8-0-7 When printing on media in Tray 3, specify the size of the left margin. LEFT ADJ TRAY4Settings-8-0-7 When printing on media in Tray 4, specify the size of the left margin. LEFT ADJ DUPLEXSettings-8-0-7 When printing on media using duplex pass, specify the size of the left margin. LD POWERSettings0-7 Adjust the intensity of laser output. VIDEO TIME LAGSettings0-15 When resolution is set to 1200 dpi, adjust the video output start point horizontally in the even lines. SUP- PLIESRE- PLACEFUSER UNITSettingsYES/NO Reset the service life counter for the fuser unit. QUICK SET- TINGUP- DATE SET- TINGSetupEXECUTE/CANCEL Select whether or not to update the printer settings from the definitions file on the USB memory device. If EXECUTE is selected, the printer settings are updated. If CANCEL is selected, the settings are not updated. BACKUP SET- TINGSetupEXECUTE/CANCEL Select whether or not to save the printer settings information on a USB memory device. If EXECUTE is selected, the printer settings are saved on a USB memory device. If CANCEL is selected, the settings are not saved. Downloaded From ManualsPrinter.com Manuals
Configuration Menu Overview 77 SERVICE MENU With this menu, the service representative can adjust the printer and perform maintenance operations. This menu cannot be used by the user. Downloaded From ManualsPrinter.com Manuals
Configuration Menu Overview 78 Downloaded From ManualsPrinter.com Manuals
Memory Direct Downloaded From ManualsPrinter.com Manuals
Memory Direct 80 Memory Direct PDF, XPS, JPEG and TIFF files saved on USB memory devices can be printed by plugging the USB memory device into the printer. Memory direct can be used only if an optional hard disk kit or a Com- pactFlash card is installed. In order to perform collated printing with memory direct, an optional hard disk kit or a CompactFlash card of 1 GB or more must be installed. For details on specifying settings with the control panel, refer to “MEM- ORY DIRECT” on page 52. Printing From a Connected USB Memory Device 1Open the memory direct print port cover. 2Plug the USB memory device into the memory direct print port. The USB icon appears in the upper-left corner of the message window, and the Memory Direct menu appears. 3Select LIST OF FILES, and then press the Menu/Select key. Downloaded From ManualsPrinter.com Manuals