Konica Minolta bizhub 40P User Manual
Have a look at the manual Konica Minolta bizhub 40P User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 61 Konica manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Lower Feeder Unit 211 6Pull out the trays. 7Lift up the printer by holding the recessed areas at both sides of the printer as shown in the fig- ure. 8With another persons help, place the printer on top of the lower feeder unit, making sure that the positioning pins on the lower feeder unit correctly fit into the holes on the bottom of the printer. The printer must be low- ered gently. Otherwise, the interior parts may be damaged. Downloaded From ManualsPrinter.com Manuals
Lower Feeder Unit 212 WARNING! This printer weighs approximately 23 kg (50.8 lbs) when it is fully loaded with consumables. The printer must be lifted by two people. 9Insert the fasteners into the 2 locations inside and 2 locations at the back of the printer. Downloaded From ManualsPrinter.com Manuals
Lower Feeder Unit 213 10Push the trays completely into the printer. 11Reconnect all interface cables. 12Reconnect the power cord, and turn on the printer. 13Declare Paper Source Unit 3/4 in the Windows printer driver (Properties/ Configure tab). Downloaded From ManualsPrinter.com Manuals
Offset Tray 214 Offset Tray When the offset tray is installed, job separation and offset printing can be per- formed. Installing the Offset Tray 1Turn off the printer and discon- nect the power cord and inter- face cables. Downloaded From ManualsPrinter.com Manuals
Offset Tray 215 2Loosen the right and left thumb- screws as shown in the figure to remove the top cover of the paper exit. 3Insert the right and left tabs of the offset tray into the holes at the top of the printer and slowly put the offset tray down to the top of the printer. Downloaded From ManualsPrinter.com Manuals
Offset Tray 216 4Tighten the two screws at both ends of the bottom of the offset tray. 5Draw the extension tray (1). When printing a thick paper, you can flip the stopper as shown in the figure below (2). 6Reconnect all interface cables. 7Reconnect the power cord, and turn on the printer. 8Declare Offset Tray in the Windows printer driver (Properties/Configure tab). Downloaded From ManualsPrinter.com Manuals
Appendix Downloaded From ManualsPrinter.com Manuals
Technical Specifications 218 Technical Specifications Printer Type Desktop A4 laser beam printer Print system Semiconductor laser beam scanning system Exposure system Laser diode and polygon mirror scanning Developing system Electro photographic System (roller charging, single component magnetic toner development) Resolution 600 dpi × 600 dpi × 1 bit 1200 dpi × 1200 dpi × 1 bit First print output time Simplex 9.4 seconds for A4/Letter plain paper Duplex 12.7 seconds for A4 plain paper 12.6 seconds for Letter plain paper Print speed (unit: ppm (Page Per Minute))Simplex 43 ppm for A4 plain paper 45.1 ppm for Letter plain paper Duplex 26.4 ppm for A4 plain paper 27.2 ppm for Letter plain paper Downloaded From ManualsPrinter.com Manuals
Technical Specifications 219 Media sizes • Letter • Legal •Statement • Executive •A4 •A5 •A6 •B5 (JIS) •B6 • Folio • SP Folio • Foolscap • UK Quarto • Government Letter • Government Legal • 16K • Kai 16 • Kai 32 • Japanese Postcard • Japanese Postcard-D •B5 (ISO) • Envelope #10 • Envelope DL • Envelope C5 • Envelope C6 • Envelope Chou #3 • Envelope Monarch • Envelope Chou #4 • Envelope You #4 •Custom size Tray 1 Width: 76.2-215.9 (3.87 - 8.5 inch) Length: 127.0-900 (5.83 - 35.43 inch) Tray 2/3/4 Width: 98.4-215.9 (3.0 - 8.5 inch) Length: 148.0-355.6 (5.0 - 14.0 inch) Downloaded From ManualsPrinter.com Manuals
Technical Specifications 220 Paper/Media • Plain paper 68-105 g/m2 (18-28 lb bond) •Recycled 68-105 g/m 2 (18-28 lb bond) • Transparencies • Envelopes • Label • Thick 1 (106-159 g/m 2 / 28-42 lb bond) • Thick 2 (160-216 g/m2 / 43-57 lb bond) • Thick 3 (106-216 g/m2 / 28-57 lb bond) • Postcard • Thin paper (64-67 g/m 2 / 17- 18 lb bond) Paper supply Tray 1 Plain/Recycled paper: 150 sheets Transparency: 100 sheets Envelope: 15 sheets Labels: 100 sheets Thick paper: 60 sheets Postcard: 55 sheets Thin paper: 150 sheets Banner paper: 1 sheet Tray 2/ 3/4Plain/Recycled paper: 550 sheets Transparency: 100 sheets Envelope: 80 sheets Labels: 290 sheets Thick paper: 160 sheets Postcard: 200 sheets Thin paper: 550 sheets Output tray capacity Standard config- urationMain output tray: 500 sheets (Plain paper: 80 g/m 2 / 22 lb) Face up tray: 70 sheets (Plain paper: 80 g/m 2 / 22 lb) Optional offset tray installedSub output tray: 500 sheets (Plain paper: 80 g/m 2 / 22 lb) Operating temperature 10 to 35°C (50 to 95°F) Operating humidity 15 to 85% Power supply 120 V, 50 to 60 Hz 220 to 240 V, 50 to 60 Hz Downloaded From ManualsPrinter.com Manuals