Konica Minolta bizhub 40P User Manual

							Configuration Menu Overview 41
CUSTOM 
SIZESpecify the paper size when custom-sized 
paper is loaded into Tray 2.
The setting units can be switched between 
millimeters and inches with the 
SYS 
DEFAULT MENU/PAPER/UNIT OF 
MEASURE
 setting.
Setting range for 
WIDTH
„For MILLIMETERS: 98 to 216 mm
(default)
–North America: 216 mm
–All other regions: 210 mm
„For INCHES: 3.87 to 8.50 inches
(default)
–North America: 8.50 inches
–All other regions: 8.27 inches
Setting range for LENGTH
„For MILLIMETERS: 148 to 356 mm
(default)
–North America: 279 mm
–All other regions: 297 mm
„For INCHES: 5.83 to 
14.00 inches 
(default)
–North America:11.00 inches
–All other regions: 11.69 inches
This menu item appears only if PAPER 
SIZE
 is set to CUSTOM.
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 42
PAPER 
TYPESettingsANY/PLAIN PAPER/
RECYCLED/THICK 1/
THICK 2/THICK 3/
LABEL/TRANSPARENCY/
ENVELOPE/POSTCARD/
THIN PAPER
Select the setting for the type of paper 
loaded into Tray 2.
SIZE 
SET-
TINGSettingsAUTO/USER SELECT
If AUTO is selected, the printer 
automatically detects the paper size.
If 
USER SELECT is selected, a user can 
select the paper size. 
TRAY 3 PAPER 
SIZESettingsLETTER/LEGAL/
EXECUTIVE/A4/A5/A6/
B5(JIS)/B6(JIS)/GOVT 
LETTER/STATEMENT/
FOLIO/SP FOLIO/UK 
QUARTO/FOOLSCAP/GOVT 
LEGAL/16K/KAI 16/KAI 
32/ENV C6/ENV DL/ENV 
MONARCH/ENV CHOU#3/
B5(ISO)/ENV #10/ENV 
YOU#4/JPOST/JPOST-D/
CUSTOM
Select the setting for the size of paper 
loaded into Tray 3.
The default setting for North 
America is 
LETTER. The default 
setting for all other regions is 
A4.
If AUTO is selected from the PAPER 
MENU/PAPER SOURCE/TRAY 
3/SIZE SETTING
 menu, the 
printer automatically detects the 
paper size.
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 43
CUSTOM 
SIZESpecify the paper size when custom-sized 
paper is loaded into Tray 3.
The setting units can be switched between 
millimeters and inches with the 
SYS 
DEFAULT MENU/PAPER/UNIT OF 
MEASURE
 setting.
Setting range for 
WIDTH
„For MILLIMETERS: 98 to 216 mm
(default)
–North America: 216 mm
–All other regions: 210 mm
„For INCHES: 3.87 to 8.50 inches
(default)
–North America: 8.50 inches
–All other regions: 8.27 inches
Setting range for LENGTH
„For MILLIMETERS: 148 to 356 mm
(default)
–North America: 279 mm
–All other regions: 297 mm
„For INCHES: 5.83 to 
14.00 inches 
(default)
–North America:11.00 inches
–All other regions: 11.69 inches
This menu item appears only if PAPER 
SIZE
 is set to CUSTOM.
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 44
PAPER 
TYPESettingsANY/PLAIN PAPER/
RECYCLED/THICK 1/
THICK 2/THICK 3/
LABEL/TRANSPARENCY/
ENVELOPE/POSTCARD/
THIN PAPER
Select the setting for the type of paper 
loaded into Tray 3.
SIZE 
SET-
TINGSettingsAUTO/USER SELECT
If AUTO is selected, the printer 
automatically detects the paper size.
If 
USER SELECT is selected, a user can 
select the paper size. 
TRAY 4 PAPER 
SIZESettingsLETTER/LEGAL/
EXECUTIVE/A4/A5/A6/
B5(JIS)/B6(JIS)/GOVT 
LETTER/STATEMENT/
FOLIO/SP FOLIO/UK 
QUARTO/FOOLSCAP/GOVT 
LEGAL/16K/KAI 16/KAI 
32/ENV C6/ENV DL/ENV 
MONARCH/ENV CHOU#3/
B5(ISO)/ENV #10/ENV 
YOU#4/JPOST/JPOST-D/
CUSTOM
Select the setting for the size of paper 
loaded into Tray 4.
The default setting for North 
America is 
LETTER. The default 
setting for all other regions is 
A4.
If AUTO is selected from the PAPER 
MENU/PAPER SOURCE/TRAY 
4/SIZE SETTING
 menu, the 
printer automatically detects the 
paper size.
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 45
CUSTOM 
SIZESpecify the paper size when custom-sized 
paper is loaded into Tray 4.
The setting units can be switched between 
millimeters and inches with the 
SYS 
DEFAULT MENU/PAPER/UNIT OF 
MEASURE
 setting.
Setting range for 
WIDTH
„For MILLIMETERS: 98 to 216 mm
(default)
–North America: 216 mm
–All other regions: 210 mm
„For INCHES: 3.87 to 8.50 inches
(default)
–North America: 8.50 inches
–All other regions: 8.27 inches
Setting range for LENGTH
„For MILLIMETERS: 148 to 356 mm
(default)
–North America: 279 mm
–All other regions: 297 mm
„For INCHES: 5.83 to 
14.00 inches 
(default)
–North America:11.00 inches
–All other regions: 11.69 inches
This menu item appears only if PAPER 
SIZE
 is set to CUSTOM.
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 46
PAPER 
TYPESettingsANY/PLAIN PAPER/
RECYCLED/THICK 1/
THICK 2/THICK 3/
LABEL/TRANSPARENCY/
ENVELOPE/POSTCARD/
THIN PAPER
Select the setting for the type of paper 
loaded into Tray 4.
SIZE 
SET-
TINGSettingsAUTO/USER SELECT
If AUTO is selected, the printer 
automatically detects the paper size.
If 
USER SELECT is selected, a user can 
select the paper size. 
TRAY 
CHAININGSettingsON/OFF
If ON is selected and the specified tray runs out of 
paper during printing, a tray loaded with paper of the 
same size is automatically selected so printing can 
continue.
If 
OFF is selected and the specified tray runs out of 
paper, printing stops.
TRAY 
MAPPINGTRAY 
MAPPING 
MODESettingsON/OFF
Select whether or not the Tray Mapping 
function is used.
LOGICAL 
TRAY 
0-9SettingsPHYSICAL TRAY1/
PHYSICAL TRAY2/
PHYSICAL TRAY3/
PHYSICAL TRAY4
Select the tray that is used for printing 
when a print job is received from another 
manufacturer’s printer driver. 
The default setting for 
LOGICAL TRAY 
2
 is PHYSICAL TRAY 2. The default 
settings for all other trays are 
PHYSI-
CAL TRAY 1
. 
PHYSICAL TRAY3 and 
PHYSICAL TRAY4 appear only if 
an optional lower feeder unit is 
installed.
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 47
DUPLEXSettingsOFF/LONG EDGE/SHORT EDGE
If LONG EDGE is selected, the pages will be printed on both sides 
of the paper for long-edge binding.
If 
SHORT EDGE is selected, the pages will be printed on both 
sides of the paper for short-edge binding.
The setting specified in the printer driver will override this menu 
setting.
COPIESSettings1-9999
Specify the number of copies to be printed.
The setting specified in the printer driver will override this menu 
setting.
COLLATESettingsON/OFF
If ON is selected, all pages of the document are printed before the 
next copy is printed.
If 
OFF is selected, all copies of the document are not printed 
separately.
The setting specified in the printer driver will override this menu 
setting.
This menu item appears only if an optional hard disk kit or a 
CompactFlash card of 1 GB or more is installed.
FIN-
ISHINGSettingsSUB TRAY/MAIN TRAY/OFFSET
When SUB TRAY is selected, the paper is fed to the sub output 
tray.
When 
MAIN TRAY is selected, the paper is fed to the main out-
put tray.
When 
OFFSET is selected, the paper is fed to the sub output tray 
with each copy slightly shifted.
The setting specified in the printer driver will override this menu 
setting.
The paper size available for SUB TRAY or OFFSET is as 
follows:
Width: 
89 to 216 mm (3.5 to 8.5 inches)
Length: 
140 to 356 mm (5.5 to 14.0 inches)
OFFSET can be set only when COLLATE is ON. 
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 48
JOB 
SEPA-
RATIONSettingsON/OFF
The paper is fed to the sub output tray with each print job slightly 
shifted.
If FINISHING is set to MAIN TRAY, the print jobs are fed 
out stacked on the top of each other without being shifted.
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 49 QUALITY MENU
With this menu, settings for the print quality can be specified.
All factory default values are shown in bold.
RESOLU-
TIONSettings600/1200
The resolution of the print image (600dpi or 1200dpi) can be 
specified.
BRIGHT-
NESSSettings-15%/-10%/-5%/0%/+5%/+10%/
+15%
The brightness of the printed image can be adjusted.
CONTRASTSettings-15%/-10%/-5%/0%/+5%/+10%/
+15%
The contrast of the print image can be adjusted.
TEXT PRINTING
RESOLUTION
BRIGHTNESS
HALFTONE
QUALITY MENU
IMAGE PRINTING
GRAPHICS 
PRINTING
CONTRAST
ECONOMY PRINT
Downloaded From ManualsPrinter.com Manuals 
						

							Configuration Menu Overview 50
HALFTONE IMAGE 
PRINTINGSettingsLINE ART/DETAIL/
SMOOTH
Select how halftones in images are 
reproduced.
If 
LINE ART is selected, halftones are 
reproduced with high precision.
If 
DETAIL is selected, halftones are 
reproduced with detail.
If 
SMOOTH is selected, halftones are 
reproduced with smoothness.
TEXT 
PRINTINGSettingsLINE ART/DETAIL/
SMOOTH
Select how halftones in text are 
reproduced.
If 
LINE ART is selected, halftones are 
reproduced with high precision.
If 
DETAIL is selected, halftones are 
reproduced with detail.
If 
SMOOTH is selected, halftones are 
reproduced with smoothness.
GRAPHICS 
PRINTINGSettingsLINE ART/DETAIL/
SMOOTH
Select how halftones in graphics are 
reproduced.
If 
LINE ART is selected, halftones are 
reproduced with high precision.
If 
DETAIL is selected, halftones are 
reproduced with detail.
If 
SMOOTH is selected, halftones are 
reproduced with smoothness.
Downloaded From ManualsPrinter.com Manuals