Inter-Tel Imx/Gmx 256 Installation And Field Maintenance Manual

PROGRAMMINGIssue 1, November 1994INTER-TELPRACTICESIMX/GMX 256 INSTAUATION & MAINTENANCE
l
DISA: To assign the trunk group for DISA ring in,
select the DISA option button. A check box, text
box, and list box appear as shown on the preceding
page. Program the following:
- Security Code: A day and/or night mode security
code can be assigned by selecting the text box
(Day or Night) and typing the desired code. In
the 
Extended software package, codes can be
4-7 digits long (using any combination of digits...

INTER-TELPRACTICESIMWGMX 256 INSTALLATION & MAINTENANCEPROGRAMMINGIssue 1, November 1994
pasubject to Toll Restrict
0Exempt from LCR only
- Assigned Call Cost -0l 
Free0
-l&l0
IO-Digit Toll
0Operator/International
0
0
I
r Absorbed Digits Application -
IO0 pBX Line
0
-Local Central Office
clAbsorbed Digits Repeatable
Absorbed Strings
13.33TOLL RESTRICTION: To program the toll
restriction parameters for the trunk group (i.e., equal
access, absorbed digits, etc.), select the Toll Restriction
command button...

PROGRAMMINGINTER-TELPRACTIcEsIssue 1, November 1994IMX/GMX 256 INS’JALLATION & MAINTENANCE
l
ABSORBED DIGITS REPEATABLE: Ifthe local
central office absorbs 
digita, determine if they are“repeatable” (that is, the digit string is absorbed
when it is dialed more than once), or if the digit
string is processed as part of the telephone number
when dialed a second time. If the digits are repeat-
able, select the Absorbed Digits Repeatable check
box (by 
pressing the SPACE BAR) to place an X in
it. (Selecting...

INTER-TELPRACTICESIMX/GMX 256 INS’E4LLATION & MAINTENANCEPROGRAMMINGIssue 1, November 1994
bcription:Tenant Group:
- Music On Hold0
Silence0l Music#l0
Tick Tone0Music #2
1
NumberDay Ring-in Night Ring-inName
IExit1
- st=fbpe -0
Immediate0
0 Wink
0
Delay
- DISACodes -
Day:El
N&ht: -1
IJay SCOS1
( &htSCOS )DID Group Programming Window
13.36 The window shown above appears when an
item is selected from the DID Croups list box shown on
page 
5-10s. (DID group programming is also used for
E&M trunks that...

PROGRAMMINGIssue 1, November 1994INTER-TELPRACTICESIMX/GMX 256lIWlXLUTION & IUINTENANCE
3.42DAY/NIGHT SCOS @ISA Class of Service):
fhis feature is available only intheE&ndedpackage.)
HSA trunks can be given day and/or night mode toll re-
trictions like those described on page 4-27 for individ-al stations (except 
LCR-Only). When a DISA caller
ials an outgoing call, the call is checked against the
)ISA trunk’s toll restriction. If the call is disallowed,
le DISA caller is sent to the primary attendant....

INTER-TELPRACTICESIMX/GMX 256 INS-TION % MAINTENANCEPROGRAMMINGIssue 1, November 1994
13.45 ADD ENTRIES:To add a number (or block of
numbers) to the DID group, select the Add Entries com-
mand button. The following window appears.
(ok) (-xz-)
Start Digits:10201II
Number of Entries:l-l1Ol
START DIGITS: Enter the first address digit(s) that
appear after the base number of the DID numbers in
the Start Digits text box. 
(In the example, the num-
bers will begin with 
9611QoJ). NUMREROFENTRIES:
Indicate the...

PROGRAMMINGIssue 1, November 1994lNTER-TELPRAcIIcEsIMX/GMX 256 INSTALLATION & MAINTENANCE
alphabetically by name, select the Sort 
com-
mand button. The following window appears.
Choose the dc&cd sorting method by selecting
the corresponding option button. Then 
selict the
OK command button. When the list of stations
returns, the list box will show the stations in the
selected order. To exit without changing the sort-
ing method, select the Cancel command button.
(4)When the list of extensions appears as...

INTER-TELPRACTICESIMX/GMX 256 INST4LLATION & MAINTENANCEPROGRAMMINGIssue 1, November 1994
Station:
I
[ ok1
- BJight Ring-in Type
0Single
0
Hunt/LJCD0l Multiple
0DISA
Ring-In/Answer Pattern
rDay Ring-in 
Qpe0Single
0l 
HuntAJCD0Multiple
01 DISA
Hunt 
GroudUCD
I Night Ring-in ‘Qpe-,
13.48DID NUMBERS: The list box shown on page
5-115 lists the DID numbers, their ring-in types, and
name. When an item in the list is selected, the window
shown above appears.I
0USERNAME: Enter a name of up to 7 characters. If...

PROGRAMMINGIssue 1, November 1994JNTRR-TELPRACTICESIMX/GMX 256 INS~TION & MAINTENANCE
changes. To return to the DID Croup X window without
updating the database, select the Cancel button.Ring-In/Answer Patterns Window
13.50The following window appears when an item isselected from the 
Ring-luhswer list box shown on
page 
5-108.
pattern Title:II
The Answer pattern will always contain
every station in the Ring-in pattern.
IExit
13.51PATFERN TlTLEz To assign a name of up to
20 characters for the...

INTER-TELPRAcTTMxsIMX/GMX 256 INSTALCATION % MAINTENANCE
PROGRAMMINGIssue 1, November 1994
13.54RELAY LIST: If the RCPU Card relay has
been programmed as signal device relay, assign it to the
selected ring-in/answer pattern by selecting the Relay
List command button. The following window appears.
Include
Exclude
[p=q
(nkll INCLUDE or EXCLUDE: To include a relay,
locate the desired relay on the Exclude list and select
it by Pressing the SPACE BAR, it will automaticallymove to the Include list. To remove a...