Inter-Tel Imx/Gmx 256 Installation And Field Maintenance Manual

PROGRAMMING
Issue 1, November 1994INTER-TELPRACTICESIMX/GMX 256 INSTALLATION & MAINTENANCE
FIGURE 5-2.CUSTOMIZED PROGRAMMING REPORT SAMPLES (Continued)
PHONE LIST:PROGRAMMING REPORTS 
- PHONE LISTPage 1
EXT# DESCRIPTIONEXT# DESCRIPTION
EXT# DESCRIPTION
-------m------B-------------
100 Station undefined 102 Station Undefined 104 Station Undefined
101 Station Undefined 103 Station Undefined
PLT#
---
200DESCRIPTIONPLT#
DESCRIPTIONPLT#
-----------------202204DESCRIPTION
--
201203ZONE DESCRIPTION
ZONE...

wrER-TRLPRAcTfcESIMx/GMx 256 INS-TION % MAINTENANCEPROGRAMMINGIssue 1, November 1994
FIGURE 5-2.CUSTOMIZED PROGRAMMING REPORT SAMPLES (Continued)
SPECL4L PURPOSE FLAGS REPORTS:PROGRAMMING REPORTS 
- SPECIAL PURPOSE FLAGS REPORTPage 1
Auto 
Att/DISA DND Breakthrough
EXT# CKT# DESCRIPTIONUSRNAME
-I--__---__--------------------
100 01.01 Station undefinedAutomatic Answer On CO 
Calls
EXT# CKT# DESCRIPTIONUSRNAME---------1__---
100 01.01 Station undefinedAutomatic Answer On IC Calls
EXT# CKT#...

PROGRAMMINGINTER-TELPRACTICES
Issue 1, November 1994
IMX/GMX 256 INSTAUATION & MAINTENANCE
FIGURE 5-2.CUSTOMIZED PROGRAMMING REPORT SAMPLES (Continued)
SYSTEM SPEED DIAL NUMBERS:PROGRAMMING REPORTS
- SYSTEM SPEED DIAL REPORTPage 1
Displayed Speed Dial Numbers:400
Programming Station:EXT# 
CKT# DESCRIPTIONUSRNAME
100 01.01 Station UndefinedNumber of Digits in Bin Number:
3#
NAMENUMBERTNT
0
1
2
3
4
5
6
7
8
910
11
. . .
3990
0
0
0
0
0
0
0
0
0
0
0
0
Page5164 

INTER-TELPRACnCEsIMx/GMX 256 INSTALLATION & MAINTENANCEPROGRAMMINGIssue 1. November 1994
FIGURE 5-2.CUSTOMIZED PROGRAMMING REPORT SAMPLES (Continued)
TIMER REPORTS:PROGRAMMING REPORTS 
- TIMER REPORT
Page 1
DESCRIPTION
VALUE UNITSRANGED-------P---a-----ma--------------------Abandoned Call Timer
Camp-On Timer
Camp-On Tone Timer
CO Hookflash
CO Re-Seize Timer
CO-CO Timer
Conference-Hold Timer
Data Wait Timer
Dial Tone Wait Timer
Dial-Initiation 
Timer--Keyset
. . .System Forwarding Initiate
Tl Busy-Out...

PROGRAMMJNGIssue 1, November 1994mTER-TELPRAcTIcEsIMX/GMX 256 INSTALLATION & MAINTENANCE
FIGURE 5-2.CUSTOMIZED PROGRAMMING REPORT SAMPLES (Continued)3IJ;
TRUNK GROUP REPORTS:PROGRAMMING REPORTS 
- TRUNK GROUP REPORTPage 1Trunk Group 
l(Al1 Lines)
Trunk Group Name:
Enable Bookflash:Yes 
-
One-Way Incoming Only:No
Tenant Group:
1( )
Music-On-Hold:Music #lDay 
OutGoing Access
EXT# CKT# DESCRIPTIONUSRNAME
10001.01StationUndefined
10101.02StationUndefined
10201.03StationUndefined
Night 
OutGoing Access
EXT#...

WTER-TELPRACTICES
PROGRAMMINGWGMX 2!%INSTALLATION & MAINTENANCEIssue 1. November 1994Actions 
Setup Exit
- Function to Perform
0
l save Database0Save 
m Database
0
@py Error File0&store Database
Perform 
Qperation0
l Path A:\0Path 
B:\0
path
(Format Disk
G. 
SAVE/RESTORE (SAVE)
16.39This program allows you to save and/or load the
database, copy error logs to the disks, and reset the sys-
tem.16.40 To access the window shown above, select
Save/Restore from the Service menu or enter the SAVE
command.16.41...

PROGRAMMINGIssue 1, November 1994INTER-TELPRACTICESIMX/GMX 256 INS~TION & MAINTENANCE
16.44 FUNCTION TO PERFORM: Select the
option button associated with the desired operation.SAVE DATABASE: Information is sent from the
system to the designated destination. Select the Per-
form Operation command button. If you are using a
floppy disk, a window appears that tells you to insert
the disk in the appropriate drive. Insert the disk then
select the OK command button to begin the transfer,
or select the cancel...

INTER-TELPRACTICESIM.X/GMX 256 INS-TION & MAINTENANCEPROGRAMMINGIssue 1, November 1994
Actions setup Exit
Serial Port.
‘.‘.‘.‘...‘.:.:.:.:.:.:i~.:.:.:.:.:.:.:.:::::~~~:.:.:..., . . .. . . . . . . . . ..A. :.::::::.:.:.:.:
-4:$y..:‘:.:.:.:.:.~w :(“’z... :x :,::‘.‘.‘C .““‘:““......““‘::::.... ,.,.,.,.,....~~..“‘,.,.,‘.,.,~x.:.:.: .,.,. :.:.:.:.:.:.:.:.:.:.: .....,.,.“.,.,.~~E
. ..A. A.......:‘.‘. .: ‘:: ” “:.:.:‘i.‘.:.~.:.:...; A.. . . ..A.... . . . . . . . . _, . ,,~,., ,,,,. _, _, _,1.. . . . . . . . . ....

PROGRAMMINGIssue 1, November 1994INTER-TELPBACTIcESIMX/GMX 256 B’WIMLATION & MAINTENANCE
&tions setup Exit
astern Configuration
clNon-blocking for voice channels
fQ&iguration
D@tal -KeysetInterface
Keyset Interface
Single-Line Interface
DIDTrunk Interface
CO-Trunk Interface
Loop Start Interface
Upper 
+30VDC Modules = 1
Lower 
+30VDC Modules = 1
Move Board
1
I.!3YSTEM CONF’IGURATION (CONI?)
16.54This window is used to set the system time,
date, and local area code of the system location. It is also
used...

_’INTER-TELPRACTICESPROGRAMMING
MX/GMX 256 INS-mON & MAINTRNANCEIssue 1, November 1994
16.58MOVE BOARD: 
This option is avaihble only
in stand-alone 
programming sessions. If you wish to
move a board from its assigned location in the cardfile to
an available slot, select the Move Board command but-
ton. The following window appears. The list box shows
all available slots. Move the highlight bar to the desiredslot and then select the OK command button. Or, to
leave the slot assignment unchanged, select...