Inter-Tel Imx/Gmx 256 Installation And Field Maintenance Manual

PROGRAMMING
Issue 1, November 1994INTER-TEL4PRAcTICESIMX/GMX 256 INSTALLATION & MAINTENANCE
Hunt GroupsH4 2003
H5 2004
H6 2005.
H7 2006
H8 2007
n Voice Mail Hunt Groupcl
Voice &muter Group
o
Altomated Attendant Hunt Group
[Z](RecallDest.)
(Announce](Ovemow][Z]
Hunt Group Station List
Pick Listi...,.,.,.,. i’ ,.~.;+:.~.~,.
. . .:.~.~.~,..:.: ::... . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .~~~~~14..:.:.:.s ._,,._...._...__..__ z?...

INTER-TELPRACTICRSIMX/GMX 256 INSTALLATION & MAINTENANCYPROGRAMMINGIssue 1, November 1994
10.32If you later remove the voice mail designation
from the hunt group, the following window appears:
li
bl
b:
St
e:
01
tlfi033 AUTOMATED
A’lTENDh HUNT
:ROUP: If the hunt group is flagged as a voice comput-
r group, the Automated Attendant Hunt Croup checkDX is available. Check this box if the stations in the
Dice computer hunt group will serve as automated at-
ndants.
034DIAL RULES: When you select this command...

PROGRAMMINGIssue 1, November 1994INTER-TELPRACTICESIMX/GMX 256 INSTALL4TION & MAINTENANCE1035
RECALL DJZSTINATION: When you select
this command button, the following window appears.
Enter the extension or circuit number of the station that
will serve as the recall destination for this voice comput-
er hunt group. When finished, select the OK command
button. Or, select the Cancel command button to 
exit
without changing the recall destination.
Recall Destination:I-
(ok) (Y=-)10.36 ANNOUNCE: To assign...

INTER-TELPRACTICESPROGRAMMING
IMX/GMX 256 INS’lXLlATION 81 MAINTENANCEIssue 1, November 1994
No Answer Advance:p[ sec.Default 18: Range 3-255
_Apnouncement:I18 sec.Default 18: Range lo-255
OXerflOW: 72 sec.IDefault 72: Range lo-255Timer Programming Window
10.46 
TIMERS: When you select the Timer com-
mand button shown on page 5-62, the window above is
displayed. To change the timer values, select the desired
text boxes and type the new value. The timer functions
are as follows:
0No Answer Advance Timer:...

PROGRAMMING
Issue 1, November 1994INTER-TELPRACTICESIMX/GMX 256 INSTAtLATION & MAINTENANCEOverflow Station:
I
- Overflow Count
Overflow 
aunt:cl
Overflow Station Data Window
10.52OVERFLOW DEVICE: Select the appropri-
ate option button to determine whether the overflow sta-
tion will be a station or a hunt group.
10.53OVERFLOW STATION: Select the Overflow
Station text box and enter the circuit or extension num-
ber of the desired overflow station or the pilot number of
the desired hunt group.
10.54...

INTER-TELPRACTICESIMX/GMX 256 INS’lALLATION 81 MAIlWENAbKXPROGRAMMING
Issue 1, November 1994
Actions 
setup Exit
rrimary Attendant Station:1 10001
011 Termination Digits:I
System Flags
Audible message indication for SL sets
Auto attendant
- dial during recording
Auto attendant
- enable ringback tone
BargeEnabled
YeS
Disabled
Disabled
IExitIE. MISCELLANE
OUS SYSTEM-WIDE
INFORMATION 
(MISC)10.57 Select Miscellaneous System-wide Informa-
tion from the System-Wide Features menu or enter the
MISC command to...

PROGRAMMINGIssue 1, November 1994INTER-TELPRACTICESIMX/GMX 256 IlwmLLA’l’ION & MAINTENANCE
0 Audible Message Indication For SL ‘Sets: If
enabled, single-line sets will receive message wait-
ing indications (six tones before dial tone) when a
message is waiting. In the default state, this is en-
abled.
0 Auto attendant-Dial During Recording: To al-
low callers to dial extension numbers while the auto-mated attendant message is playing, enable this
option by setting it to “yes.” In the default state,...

INTRR-TELPRACIICESIMX/GMX 256 INSTALLATION & MAINTRNANCEPROGRAMMINGIssue 1, November 1994
0
0
0
0Music-On-Hold For IC 
Calls: This option deter-
mines whether a user hears music on hold when
placed on hold by another station or camps on to a
resource. In the default state, this is enabled.OIIVA DSS Immediate 
‘Datumit: Determine if
DSS-equipped keysets will have immediate off-
hook voice announce capability enabled. In the de-
fault state, this is 
disabled.
OIIVA System-Wide: Determine whether the Off-...

PROGRAMMINGIssue 1, November 1994INTER-TELPRACTICESIMX/GMX 256 INSTALLATION & MAINTENANCE
Actions 
setup Exit
Page ones
pissigned Ports/Relays0
0 Relays(pi&Z-)0
&&ma1 Ports(S)
F.PAGE ZONES (PAGE)
10.62To prepare for page zone programming, make a
list of the 
keysets and/or the external paging network(s)
that are included in up to 10 paging zones. 
Keysets and
the external paging network(s) can 
be in more than one
page zone. (Refer to the program planning sheet in Fig-
ure 5-13, page 5-204, when making...

INTER-TELPRACTICESIMX/GMX 256 INSTALLATION & MAINTENANCEPROGRAMMINGIssue 1, November 1994
10.66
KJZYSE’IS: To assign the keysets that will be in
the page 
zone, select the Keysets command button. A
station list window appears as shown below.
ltlc:lude
on undefinedon Undefined
103 01.04 
-Station Undefined104 01.05 
-Station UndefinedII .J
Exclude
108 02.01 -Station Undefined
109 02.02 -Station Undefined
110 02.03 -Station 
Undetincd11102.04 ‘Station Undefined
0INCLUDE or MCLUDE: To include a station in...