Inter-Tel Imx/Gmx 256 Installation And Field Maintenance Manual

PROGRAMMINGIssue 1, November 1994INTER-TELPRACTICES
IMX/GMX 256 INSTALLATION & MAINTENANCE
lALL or NONE: To place all trunk groups in the
facility group, select the All command button. To re-
move all 
trunk groups from the facility group, select
the None command button.
NOTE: If more than one trunk group is placed in a
facility group, the trunk groups will be accessed in
numerical order by the station users. If you wish to
have them accessed in a different order, place each
trunk group in a separate...

INTER-TELPRACTICESIMWGMX 256 INSTALLATION 81 MAINTENANCEPROGRAMMINGIssue 1, November 1994
13. TRUNK PROGRAMMING
13.1When Trunk Programming is selected from the
Applications Menu window, the menu expands 
toshow
the following options:
Trunk Programming...
Individual Trunk
Trunk Croups, DID Croups, 
&
Ring-in/Answer Patterns
Tl Programming
13.2Each of the options and the windows they access
are described in detail in the following pages. Program
planning sheets for trunk programming are in Figure
5-24,...

PROGRAMMINGIssue 1, November 1994INTER-TELPRACTICES
IMX/GMX 256 IIWULLATION % MAINTENANCE
Actions setup Exit
xX.xX G/L
xX.xX G/L
xX.xX G/L
xX.xX G/L
XX-XX G/L
xX.xX DID
xX.xX DID
xX.xX DID
xX.xX DID
xX.xX DID
IExitI
Receive Gain:q0 dB0Ground Start
Transmit Gain:
q0a I.&opstart0 
dB
-Hybrid Balance -0
Ideal0
l Unloaded0
Loaded
EE & M Interface
l-lCurrent DT Detect
uRel_axed Ring Detect
wQTMF Signaling
LlIgnore Answer &per&ion
1
OVpe1 OVpe4 ()2-Wire,
OVP2 Obpe5 ()4-Wire
13.5TRUNKS: To begin programming an...

INTER-TRLPRACTICESIMWGMX 256 INSTALLATION & MAINTENANCEPROGRAMMINGIssue 1, November 1994
13.13RELAXED RING DETECT: 
Ifthe trunk does
not supply standard ringing (such as an 
H&T Dimen-
sion PBX 
OPX), select the Relaxed Ring Detect check
box (by pressing the SPACE BAR) to place an X in it.
This option is not available for LSC, EMC, or 
TlC cir-
cuits.
13.14DTMF SIGNALING: Ifthe trunk uses JYIMFsignaling, select the 
M’MF Signaling check box (by
pressing the SPACE BAR) to place an Xin it. If the trunk...

PROGRAMMINGIssue 1, November 1994INTER-TELPRACTICESIMWGMX 256 INSTALLATION & MAINTENANCE
B.TRUNK GROUPS, DID GROUPS, AND
RINGIN/ANSWER PAlTERNS (TRNK)
13.16When you 
select Trunk Groups, DID Croups,
and Ring-In/Answer Patterns 
from the Trnnk Program-
ming menu, or enter the TRNK command, the window
appears as shown on page 
S-108.
13.17‘Ihmk Groups: To prepare to program trunk
groups, determine the following information:
0
Trunk group description (up to 20 characters) and
display identification (up to...

INTER-TELPRACXXXSIMWGMX 256 INSTALLATION % -AlWEPROGRAMMING
Issue 1, November 1994
13.18DID Groups: There can be up to 11 direct in-
ward dialing (DID) groups, including the DID group for
unused trunks). For each DID group, determine the fol-
lowing information:
0
0
0
0
0
I
I
DID group description (up to 20 characters) and dis-
play identification (up to seven characters) for each
DID number.
List the trunks that will be in the DID group by cir-
cuit number.
For each DID group, note the base number and...

PROGRAMMING
Issue 1, November 1994INTER-TEJ.MPRAcTIcESIlbWGMX 256 lNSTALLATLON & MAINTENANCE
&dons Setup Exit
Trunk GroupsRing-in/Answer Patterns
DID Groups
03
04
05
06
07
08
09
10
13.20 TRUNK GROUPS: Up to 47 trunk groups,
with up to 184 trunks each, can be programmed. To pro-
gram the characteristics of an individual trunk group,
scroll through the Trunk Groups list box until the desired
group is highlighted. When a trunk group is selected, a
Trunk Group programming window appears, as shown
on the next...

INTJZR-TRLPRACTICESIMWGMX 256 INSTALLATION & MAINTENANCEPROGRAMMINGIssue 1, November 1994
,E & M Trunk GroupName: 
-1 Tenant Grp: mEnable Hoo@lash-
clOne-Nay Incoming Only
- &&sic-On-Hold0
Silence0
Tick Tone
- Handshaking
0
l Immediate-dial0
Delayed-dial0
Wink-start1
@ID Digit TranslationU Continuous
0. Burst
wReturn Dial Tone
Trunk Group Programming Window13.24 DESCRIPTION: If desired, program a de-
scription for the trunk group (that will appear in the
Trunk Group list) by selecting the Description...

PROGRAMMINGIssue 1, November 1994
INTER-TELPRACTICES
IMX/GMX 256 INSTALIATION & MAINTENANCE
(Dial-repeating trunk groups should have this option
enabled.) If disabled, the 256 System automatically
performs the handshake and then waits to receive
digits. To enable the 256 System to send dial tone,
place an X in the Return Dial Tone check box by se-lecting it. (In the default state, this option is en-
abled.)l DID DIGIT TRANSLATION: There are 
~N&S
available that function like a DID trunk for incoming...

IHTER-TELPRACTICESIMX/GMX 256 INSIALLATION & MAINTENANCE
PROGRAMMINGIssue 1, November 1994
- Day Ring-in ljpe0l Single
0
HuntAJCD0Multiple
01 DISA
Station:
I
I Night Ring-in ?)lpe-,Ring/Answer Pattern
- Day Ring-in Qpe-II Night Ring-in ‘I@z-,0Single
0l 
HuntKJCD0Multiple
0DISA
Hunt 
Group/UCDDISA Security Codes
Night: 
II
0Required for IC calls
Nigh1 Toll Restrictions
13.32RING-IN: (This is not available for Dial Re-
pearing E&M trunks) To program ring-in type for the
trunk group, select the Ring-In...