Inter-Tel GMX-48 INSTALLATION & MAINTENANCE Manual

PROGRAMMING 
Issue 2, May 1990 ‘.. 
INTER-TEL PRACTICES 
GMX.48 INSTALLATION & MAINTENANCE 
[DACJ Soft Feature Key Default Values (/SOFT) 
7.12 
Enter C from the station data menu, AC from 
the station/DSS data menu, or enter DAC or /SOFT 
from the database programming menu to set the de- 
fault value of the user-programmable keyset feature 
keys and station keys. The programmer can then reset 
all stations to the new default values, or leave them 
unchanged so the default values will be set only if the...

INTER-TEL PRACTICES ‘. 
GMX-48 INSTALLATION & MAINTENANCE PROGRAMMING 
Issue 2, May 1990 
REVIEW 24-LINE KEYSET SOFT FEATURE 
KEYS (N): 
KEY A “FEATURE: INDMDUAL HOLD” 
FEATURE CODE (E336) 
: 
KEY B “FEATURE: TRANSFER CO CALL 
FEATURE CODE (E345) 
: 
KEY C “CO LINE ACCESS: AUTOMATIC LINE 
SELECTION” 
FEATURE CODE (E89) 
: 
KEY 
D “FEATURE: HOOKFLASH” 
FEATURE CODE (E330) 
: 
KEY E “FEATURE: REDIAL’ 
FEATURE CODE (E380) 
: 
KEY F “FEATURE: SYSTEM SPEED DIAE’ 
FEATURE CODE (E381) 
: 
KEY G “FEATURE: QUEUE...

PROGRAMMING 
Issue 2, May 1990 ‘. 
INTER-TEL PRACTICES 
GMX.48 INSTALLATION & MAINTENANCE 
REVIEW 24-LINE AIM KEYSET FEATURES 
AGAIN (N)? 
PERFORM UPDATE TO SYSTEM DATABASE 
(Y OR N) 
REVIEW 1ZLINE KEYSET SOFT FEATURE 
KEYS (N): 
KEY A “FEATURE: INDIVIDUAL HOLD” 
FEATURE CODE (E336) 
: 
KEY 
B “FEATURE: TRANSFER CO CALL’ 
FEATURE CODE (E345) 
: 
LIST OF 1ZLINE KEYSETS TO UPDATE 
(NONE): 
REVIEW 1ZLINE KEYSET FEATURES AGAIN 
(N)? 
PERFORM UPDATE TO SYSTEM DATABASE 
CYORN) 
REVIEW S/12-LINE AIM KEYSET SOFT...

INTER-TEL PRACTICES 
GMX-48 INSTALLATION & MAINTENANCE ‘.. 
PROGRAMMING 
Issue 2, May 1990 
REVIEW 8/12-LINE AIM KEYSET FEATURES 
AGAIN (N)? 
REVIEW STATION KEYS (N): 
STATION KEY X 
FEATURE CODE (NONE) 
: 
LIST OF KEYSETS TO UPDATE (NONE): 
REVIEW KEYSET STATION KEYS AGAIN 
(N)? 
REVIEW SYSTEM-WIDE KEYSET FWD KEY 
DEFAULT (N): 
SYSTEM-WIDE FWD KEY FEATURE 
FWD KEY “FEATURE: CALL FORWARD ALL 
CALLS” 
FEATURE CODE (E355) 
: 
LIST OF KEYSETS TO UPDATE (NONE): 
REVlEW SYSTEM-WIDE FWD KEY 
FEATURE AGAIN (N)?...

PROGRAMMING 
Issue 2, May 1990 ‘. 
INTER-TEL PRACTICES 
GMX-48 INSTALLATION & MAINTENANCE 
[DAD] Copy Station Information (/COPY) 
isting station replaces that station’s current features. 
7.14 Station information can be copied to several 
stations using this program. (User names, extension 
numbers, hunt groups, and DSS/BLF Unit assign- 
ments are not copied.) Copying information to an ex- 
7.15 To reach this program, enter D from the sta- 
tion data menu, AD from the station/DSS data menu, 
or enter...

INTER-TEL PRACTICES 
GMX-48 INSTALLATION & MAINTENANCE PROGRAMMING 
Issue 2, May 1990 
[DAE] Assign Common SCOS to Stations (KCOS) 7.17 
This program cannot be used to review current 
assignments. The prompts show default values until 
7.16 
Station class of service (SCOS) is assigned to new SCOS information is entered for the list of sta- 
multiple stations using this program. It is accessed by tions. After each list is entered, the terminal 
entering E from the station data menu, AE from the redisplays...

PROGRAMMING 
Issue 2, May 1990 ‘.. 
INTER-TEL PRACTICES 
GMX.48 INSTALLATION & MAINTENANCE 
~~~~~~~~~~~~ 
‘::::::“““““.L’...‘.‘.‘......... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 
::,:,:.:.:,:>:.:.:.:.y.v .,.;,.,.......... ... ........

INTER-TEL PRACTICES 
GMX-48 INSTALLATION & MAINTENANCE ‘. 
PROGRAMMING 
Issue 2, May 1990 
[DAF] Assign Common CO Line Lists to Stations 
(/SCOM) 7.19 
This program cannot 
be used to review the cur- 
rent assignments. The prompts show default values 
until new CO. information is entered for the list of 
7.18 
Enter F from the station data menu, AF from stations. Whenever the prompt asks for a list, entries 
the station/DSS data menu, or enter DAF or /SCOM redisplay for verification after they are...

PROGRAMMING 
Issue 2, May 1990 ‘. 
INTER-TEL PRACTICES 
GMX-48 INSTALLATION & MAINTENANCE 
[DAG] Assign Common Page Zones to Keysets 
(/PCOM) 
720 Select option G from the station data menu, 
select AG from the station/DSS data menu, or enter 
DAG or /PCOM from the database programming 
menu to assign the same page zone list to multiple 
stations. A program planning sheet is located in Fig- 
ure 5-9 on page 5-153. 731 This program cannot be used to review the cur- 
rent assignments. The prompts show...

INTER-TEL PRACTICES 
GMX-48 INSTALLATION & MAINTENANCE ‘. 
PROGRAMMING 
Issue 2, May 1990 
[DAH] Miscellaneous Station Features 
(/SEX) Figure 5-9 on page 5-154.) Whenever the prompt asks 
7.22 Select option H from the station data menu, 
select AH from the station/DSS data menu, or enter 
DAH or /SMSC from the database programming 
menu to assign miscellaneous station features to mul- 
tiple stations. (A program planning sheet is located in for a list, entries redisplay for verification after they 
are...