Inter-Tel GMX-48 INSTALLATION & MAINTENANCE Manual

PROGRAMMING ‘, 
Issue 2, May 1990 INTER-TEL PRACTICES 
GMX-48 INSTALLATION 8~ MAINTENANCE 
Station class of service (SCOS): 
Refer to the 
FEATURES section, page 4-27, for a full expla- 
nation of the SCOS designations. 
Secretarial intercept station: Determine the cir- 
cuit number of a station that will receive calls 
when the station (that is being assigned a secretar- 
ial intercept) is busy or does not answer. 
Attendant station: Determine the circuit number 
of the station that serves as the...

INTER-TEL PRACTICES 
GMX-48 INSTALLATION & MAINTENANCE ‘,. 
PROGRAMMING 
Issue 2, May 1990 
0 
l 
0 
House phone: The station can be designated as a 
house phone that automatically dials a predeter- 
mined number when the handset is lifted. The as- 
signed day number is dialed when the system is in 
day mode and the assigned night number is dialed 
when the system is in night mode. The day/night 
house phone numbers can also be programmed 
using the house phone station speed-dial loca- 
tions. See...

PROGRAMMING 
Issue 2, May 1990 INTER-TEL PRACTICES 
GMX-48 INSTALLATION & MAINTENANCE 
RANGE OF STATIONS TO BE REVIEWED 
(ALL)? Enter a range of circuit (X.Y) or intercom (EXXX) 
numbers of the stations to be programmed. Enter 
NONE to return to the station/DSS data menu 
prompt ([DA]:) or enter ALL to view all stations. 
KEYSET X.Y (ATTENDANT) 
or SL SET X.Y 
EQUIPPED (N): 
EXTENSION (EXXX) 
USERNAME ( ): 
TENANT GROUP NAME “ ” 
TENANT GROUP NUMBER (1): Enter a tenant group number (l-4). 
DAY SCOS (0)...

INTER-TEL PRACTICES 
GMX-48 INSTALLATION & MAINTENANCE PROGRAMMING 
Issue 2, May 1990 
(5) 
AREA/OFFICE CODE (N): Y- Local and long distance calls are limited to the 
allowed area/office code lists. 
N- Area/office code lists are not checked when a 
call is placed. 
(6) ARS ONLY (N): 
(7) ALTERNATE CARRIER (N): 
(8) ENABLE ALD (N): 
NIGHT SCOS (0) 
REVIEW NIGHT SCOS STATUS (N): 
(0) UNRESTRICTED (Y): 
RESTRICTED 
(1) OPERATOR ACCESS (N): 
(2) TOLL ACCESS (N): 
(3) INTERNATIONAL (N): 
(4) EIGHT DIGIT (N):...

PROGRAMMING 
Issue 2, May 1990 I. 
INTER-TEL PRACTICES 
GMX-48 INSTALLATION & MAINTENANCE 
ATTENDANT 
(1.1): Enter the circuit (X.Y) or intercom (EXXX) 
number of a programmed attendant station that 
will be this station’s attendant (they must be in the 
same tenant group if cross-tenant traffic is denied). 
Enter NONE if an attendant is not used. 
This 
prompt does not appear when programming an 
attendant’s station. 
MESSAGE CENTER (1.1): Enter the circuit (X.Y) or intercom (EXXX) 
number of the...

INTER-TEL FRACTICES PROGRAMMING 
GMX-48 INSTALLATION & MAINTENANCE Issue 2, May 1990 
RECALL DESTINATION (NONE): This prompt appears only if Y was selected at the 
automated attendant prompt. 
Enter the circuit (X.Y) 
or intercom (EXXX) number of the station that 
will receive recalls from stations that are called 
through the automated attendant. 
REVIEW DIGIT TRANSLATION (N): 
This prompt appears only if Y was selected at the 
AUTOMATED ATTENDANTprompt. 
Y- 
Continue to the next prompt. 
N- Advance to...

PROGRAMMING 
Issue 2, May 1990 INTER-TEL PRACTICES 
GMX-48 INSTALLATION & MAINTENANCE 
FAX PORT (N): This prompt appears only when using Advanced or 
Intermediate sofrware and when programming a 
single-line circuit. 
Y- 
This circuit has a facsimile machine connected. 
Continue with the next prompt. 
N- This circuit does not have a facsimile machine 
connected. Advance to the FWD ENABLED 
prompt. 
FAX MESSAGE CENTER (NONE): 
FWD ENABLED (Y): 
FPN ENABLED (Y): 
HOUSE PHONE (N): 
This prompt appears only...

INTER-TEL PRACTICES 
GMX-48 INSTALLATION & MAINTENANCE PROGRAMMING 
Issue 2, May 1990 
SECONDARY VOICE PATH KEYSET (N): This prompt appears for keysets only. 
SPEAKERPHONE ENABLED (Y): 
OFF-PREMISES EXTENSION (N): 
VOICE MAIL/COMPUTER STATION (N):  OFF-HOOK VOICE 
ENABLED (N): Y- This is a 24-line keyset that has a secondary 
voice path installed. (Refer to INSTALLATION, 
page 3-14.) 
N- This keyset does not have a secondary voice 
path installed. Advance to the SPEAKER- 
PHONE ENABLED prompt. 
ANNOUNCE...

PROGRAMMING 
Issue 2, May 1990 ,. 
INTER-TEL PRACTICES 
GMX-48 INSTALLATION & MAINTENANCE 
LIST OF CO LINES THAT CAN BE Enter circuit numbers of lines that can be used for 
ACCESSED FOR OUTGOING CALLS placing outgoing calls during day and night modes. 
DAY LIST (ALL): Do not include incoming-only lines. ALL or NONE 
NIGHT LIST (ALL): are valid entries. 
LIST OF CO LINES THAT CAN BE 
ANSWERED 
DAY LIST (NONE): 
NIGHT LIST (ALL): Enter circuit numbers of lines that can be answered 
at this station during...

INTER-TEL PRACTICES 
GMX-48 INSTALLATION & MAINTENANCE ‘. 
PROGRAMMING 
Issue 2, May 1990 
[DAB] Extension (Intercom Number) and Username Assignments (/NAME) 
7.11 
To use this program, enter B from the station data menu, AI3 from the station/DSS data menu, or’enter 
DAB or /NAME from the database programming menu. This program is used for assigning user names and inter- 
com numbers for individual stations. Refer to paragraph 5.2 on page 5-33 for information on ambiguous intercom 
number assignments....