Inter-Tel GMX-48 INSTALLATION & MAINTENANCE Manual

PROGRAMMING 
Issue 2, May 1990 ‘> 
INTER-TEL PRACTICES 
GMX-48 INSTALLATION & MAINTENANCE 
[DAI] Keyset Volume Default Settings (NOL) 7.23 
Select option I from the station data menu, se- 
NOTE: This program is used to set the default vol- 
ume settings on the audio interface module (AIM) 
keyset. At the date of this publication, the AIM keyset 
was still in development. When the keyset is avail- 
able, a complete feature description and detailed in- lect Al from the station/DSS data menu, or enter 
DAI...

INTER-TEL PRACTICES 
GMX-48 INSTALLATION 
B. [DB] DSS/BLF 
DATA 
7.24 Information related 
entered using the programs 
from the station/DSS data 
tabase programming menu. 
appears as shown below: 
[DB] DSS/BLF DATA 
[A] DSS/BLF 
IDENTIFICATION 
[B] DSS/BLF KEY ASSIGNMENTS  

PROGRAMMING 
Issue 2, May 1990 ‘. 
INTER-TEL PRACTICES 
GMX4 INSTALLATION & MAINTENANCE 
[DBB] DSS/BLF Key Assignments (IDKEY) 
726 Enter B from the DSS/BLF data menu, BB 
from the station/DSS data menu, or enter DBB or 
/DKEY from the database programming menu to as- 
sign or review system-wide DSS/BLF key assign- 
ments. Station intercom numbers (ElOO-E159) and 
hunt group numbers (Hl-H5 or E231-E235) can ap- pear under the DSS/BLF keys. In the Advanced and 
Intermediate software, voice mail/computer...

INTER-TEL PRACTICES 
GMX-48 INSTALLATION & MAINTENANCE PROGRAMMING 
Issue 2, May 1990 
C. [DC] STATION REPORT (ISREP) 
7.28 
This program is used to generate a report for 
any range of stations in the system. The information 
includes the station’s circuit number, intercom (ex- 
tension) number, user name, type of equipment, at- 
tendant circuit number, secretarial intercept circuit 
number, tenant group number, and related DSS/BLF 
Unit circuit number. To reach this program, enter C from the station/DSS...

PROGRAMMING 
Issue 2, May 1990 ‘.. 
INTER-TEL PRACTICES 
GMX-48 INSTALLATION & MAINTENANCE 
REVIEW SAME STATION REPORTS AGAIN 
(NJ? Y- The terminal prints the report again, fro& the 
beginning. 
N- Continue to the next prompt. 
REVIEW ADDITIONAL STATION REPORTS 
(N)? Y- Return to the BREAK AFI’ER EACH 
CIRCUIT CARD prompt. 
N- Return to the station/DSS data menu prompt 
WI:>. 
,; 
Page 5-74  

INTER-TEL PRACTICES 
GMX-48 INSTALLATION & MAINTENANCE PROGRAMMING 
Issue 2, May 1990 
8. [E] HUNT GROUPS AND VOICE 
COMPUTER GROUPS (/HUNT) 
NOTE: The use of playback devices and voice com- 
puter groups are available only in the Advanced soft- 
ware package. The use of announcement stations is 
available only in 
Basic and Advanced software. 
8.1 Select E or enter /HUNT from the database 
programming menu to assign stations for up to five 
hunt groups. In Advanced software, it is also used to 
assign...

PROGRAMMING 
Issue 2, May 1990 ‘. 
INTER-TEL PRACTICES 
GMX-48 INSTALLATION & MAINTENANCE 
Voice Mail/Voice Computer Hunt Groups 
NOTE: 
Voice mail/computer hunt groups are avail- 
able only in the Advanced software package. 
8.9 Each voice mail/computer group can be as- 
signed a name of up to seven characters that will be 
shown on display keysets to identify the source of a 
transferred call or recall from the voice mail/ 
computer group. 
8.10 Before using the program, prepare a list of the 
voice...

INTER-TEL PRACTICES 
GMX-48 INSTALLATION & MAINTENANCE PROGRAMMING 
Issue 2, May 1990 
DIAL RULE K-TO-VOICE COMPUTER CALL 
9 1 
Department number No code sent 
CO-TO-VOICE COMPUTER CALL 
No code sent 
(Nit used on GMX-48) 
10 
Day/night flag If system is in day mode = 1 
If system is in night mode = 0 
11 Account code No code sent 
12 Call type Intercom call code = 1 
13 Hunt group queue position No code sent If system is in day mode = 1 
If system is in night mode = 0 
Account code, if entered 
Outside...

PROGRAMMING 
Issue 2, May 1990 ‘. 
INTER-TEL PRACTICES 
GMX-48 INSTALLATION & MAINTENANCE 
HUNT GROUP ANNOUNCEMENT 
STATION(S) (NONE): 
IS THE ANNOUNCEMENT STATION A 
PLAYBACK DEVICE (N): This prompt does not appear in Intermediate soj?ware. 
Enter up to three circuit (X.Y) or intercom 
numbers (EXXX) in the order they are to be 
accessed. Or, enter a hunt group pilot number 
(EXXX) or number @H-H5 in 
Basic software, 
Hl-H20 in 
Advanced software). If you enter 
NONE, go to the OVERFLOW prompt. 
This...

INTER-TEL PRACTICES 
GMX-48 INSTALLATION & MAINTENANCE PROGRAMMING 
Issue 2, May 1990 
REVIEW ADDITIONAL HUNT GROUPS (N)? Y- Return to the RANGE OF HUNT GROUPS 
prompt. 
N- Advance to the next prompt if using Advanced 
software. If using 
Basic or Intermediate software, 
you return to the database programming menu 
prompt ([ 
1:). 
RANGE OF VOICE COMPUTER GROUPS TO 
BE REVIEWED (NONE): The voice computer prompts are used in Advanced 
software only. 
Enter a range of voice computer 
group numbers (6-20)...