HP Officejet 6000 Wireless User Manual
Have a look at the manual HP Officejet 6000 Wireless User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1114 HP manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Placing a call Call HP support while you are in front of the computer and the HP device. Be prepared to provide the following information: • Model number (located on the label on the front of the device) • Serial number (located on the back or bottom of the device) • Messages that appear when the situation occurs • Answers to these questions: ◦Has this situation happened before? ◦Can you re-create it? ◦Did you add any new hardware or software to your computer at about the time that this situation began? ◦Did anything else occur prior to this situation (such as a thunderstorm, HP device was moved, etc.)? After the phone support period After the phone support period, help is available from HP at an additional cost. Help may also be available at the HP online support Web site: www.hp.com/support. Contact your HP dealer or call the support phone number for your country/region to learn more about support options. Additional warranty options Extended service plans are available for the HP device additional costs. Go to www.hp.com/support, select your country/region and language, then explore the services and warranty area for information about the extended service plans. HP Quick Exchange Service (Japan) Obtain HP telephone support 137
For instructions on how to pack your product for exchange, see Pack the device. HP Korea customer support Appendix B 138 Support and warranty
Hewlett-Packard limited warranty statement Hewlett-Packard limited warranty statement 139
Ink cartridge warranty information The HP cartridge warranty is applicable when the product is used in its designated HP printing device. This warranty does not cover HP ink products that have been refilled, remanufactured, refurbished, misused, or tampered with. During the warranty period the product is covered as long as the HP ink is not depleted and the end of warranty date has not been reached. The end of warranty date, in YYYY/MM format, may be found on the product as indicated: Prepare the device for shipment If after contacting HP Customer Support or returning to the point of purchase, you are requested to send the device in for service, make sure you remove and keep the following items before returning your device: • The rear access panel or duplexer. • The output tray • The power cord, USB cable, and any other cable connected to the device • Any paper loaded in the input tray This section contains the following topics: • Remove the rear access panel or duplexer • Remove the output tray Remove the rear access panel or duplexer Remove the rear access panel or duplexer before shipping the device. ▲Push the button on either side of the rear access panel or the duplexer, and then remove the panel or unit. Remove the output tray Remove the output tray before shipping the device. Appendix B 140 Support and warranty
▲Lift the output tray, and gently pull it out of the device. Pack the device Complete the following steps after you have prepared the device for shipment. To pack the device 1.If available, pack the device for shipment by using the original packaging materials, or use the packaging materials that came with your replacement device. If you do not have the original packaging materials, please use other adequate packaging materials. Shipping damage caused by improper packaging and/or improper transportation is not covered under the warranty. 2.Place the return shipping label on the outside of the box. 3.Include the following items in the box: • A complete description of symptoms for service personnel (samples of print quality problems are helpful). • A copy of the sales slip or other proof of purchase to establish the warranty coverage period. • Your name, address, and a phone number where you can be reached during the day. Pack the device 141
C Device specifications For media and media-handling specifications, see Understand specifications for supported media. • Physical specifications • Product features and capacities • Processor and memory specifications • System requirements • Network protocol specifications • Embedded Web server specifications • Print resolution • Environmental specifications • Electrical specifications • Acoustic emission specifications (print in Draft mode, noise levels per ISO 7779) Physical specifications Size (width x depth x height) •Device: 496 x 299 x 209 mm (19.5 x 11.8 x 8.2 inches) •With Duplexer: Adds 64 mm (2.5 inches) to the rear of the device. Device weight (does not include printing supplies) •Device: 8.35 kg (18.4 lb) •With Duplexer: Adds 0.95 kg (2.0 lb) Product features and capacities FeatureCapacity Connectivity• USB 2.0-compliant high speed • Wireless 802.11b/g • Wired network Ink cartridgesFour ink cartridges (black, yellow, magenta, cyan) Supply yieldsVisit www.hp.com/pageyield/ for more information on estimated ink cartridge yields. Device languagesHP PCL 3 HP PCL 3 GUI Font supportUS fonts: CG Times, CG Times Italic, Universe, Universe Italic, Courier, Courier Italic, Letter Gothic, Letter Gothic Italic. Duty cycleUp to 7000 pages per month Processor and memory specifications Device processor 192 MHz ARM946ES, ETM9 (medium) 142 Device specifications
Device memory 64 MB built-in RAM, 32 MB built-in Flash ROM System requirements NOTE:For the most current information about supported operating systems and system requirements, visit http://www.hp.com/support/. Operating system compatibility • Windows 2000 Service Pack 4, Windows XP Service Pack 1, Windows XP x64 Service Pack 1, Windows Vista NOTE:For Windows 2000 SP4, Windows XP x64 Edition SP 1, Windows XP SP 1 Starter Edition, and Windows Vista Starter Edition only printer drivers and the Toolbox are available. • Mac OS X (v10.4.11, v10.5) • Linux (For more information, see www.hp.com/go/linuxprinting). Minimum requirements • Microsoft® Windows® 2000 Service Pack 4: Intel® Pentium® II or Celeron® processor, 128 MB RAM, 160 MB free hard disk space, Microsoft Internet Explorer 6.0 • Microsoft Windows XP (32-bit) Service Pack 1: Intel Pentium II or Celeron processor, 512 MB RAM, 225 MB free hard disk space, Microsoft Internet Explorer 6.0 • Microsoft Windows x64 Service Pack 1: AMD Athlon™ 64 or AMD Opteron™ processor, Intel Xeon® or Pentium processor with Intel EM64T support, 512MB RAM, 160 MB free hard disk space, Microsoft Internet Explorer 6.0 • Microsoft Windows Vista: 800 MHz 32-bit (x86) or 64-bit (x64) processor, 512 MB RAM, 225 MB free hard disk space, Microsoft Internet Explorer 7.0 •Mac OS X (v10.4.11, v10.5): PowerPC G3, G4, G5, or Intel Core processor, 256 MB memory, 500 MB free hard disk space •Quick Time 5.0 or later (Mac OS X) • Adobe Acrobat Reader 5.0 or later Recommended requirements • Microsoft Windows 2000 Service Pack 4: Intel Pentium III or higher processor, 256 MB RAM, 160 MB free hard disk space, Microsoft Internet Explorer 6.0 or later • Microsoft Windows XP (32-bit) Service Pack 1: Intel Pentium III or higher processor, 512MB RAM, 360 MB free hard disk space, Microsoft Internet Explorer 6.0 or later • Microsoft Windows XP x64 Service Pack 1: AMD Athlon 64 or AMD Opteron processor, Intel Xeon or Intel Pentium 4 processor with Intel EM64T support, 512MB RAM, 160 MB free hard disk space, Microsoft Internet Explorer 6.0 or later • Microsoft Windows Vista: 1 GHz 32-bit (x86) or 64-bit (x64) processor, 1 GB RAM, 355 MB free hard disk space, Microsoft Internet Explorer 7.0 or later •Mac OS X (v10.4.11, v10.5): PowerPC G3, G4, G5, or Intel Core processor, 512 MB memory, 500 MB free hard disk space •Microsoft Internet Explorer 6.0 or later (Windows 2000, Windows XP); Internet Explorer 7.0 or later (Windows Vista) System requirements 143
Network protocol specifications Network operating system compatibility • Windows 2000, Windows XP (32-bit) (Professional and Home Editions), Windows XP Professional x64 • Mac OS X (10.4.11 and higher,10.5.x) • Microsoft Windows 2000 Server Terminal Services with Citrix Metaframe XP with Feature Release 3 • Microsoft Windows 2000 Server Terminal Services with Citrix Presentation Server 4.0 • Microsoft Windows 2000 Server Terminal Services • Microsoft Windows 2003 Server Terminal Services • Microsoft Windows 2003 Server Terminal Services with Citrix Presentation Server 4.0 • Microsoft Windows 2003 Server Terminal Services with Citrix Presentation Server 4.5 • Microsoft Windows 2003 Server Terminal Services with Citrix Metaframe XP with Feature Release 3 Compatible network protocols TCP/IP Network management • HP Web Jetadmin plug-ins • Embedded Web server Features Ability to remotely configure and manage network devices Embedded Web server specifications Requirements • A TCP/IP-based network (IPX/SPX-based networks are not supported) • A Web browser (either Microsoft Internet Explorer 6.0 or higher, Opera 8.0 or higher, Mozilla Firefox 1.0 or higher, or Safari 1.2, or higher) • A network connection (you cannot use the embedded Web server connected directly to a computer with a USB cable) • An Internet connection (required for some features) NOTE:You can open the embedded Web server without being connected to the Internet. However, some features will not be available. • It must be on the same side of a firewall as the device. Print resolution Black Up to 1200 dpi with pigmented black ink Color HP enhanced photo quality (up to 4800 by 1200 dpi Optimized on HP Premium Plus photo papers with 1200 x 1200 input dpi) Appendix C 144 Device specifications
Environmental specifications Operating environment Operating temperature: 5° to 40° C (41° to 104° F) Recommended operating conditions: 15° to 32° C (59° to 90° F) Recommended relative humidity: 25 to 75% noncondensing Storage environment Storage temperature: -40° to 60° C (-40° to 140° F) Storage relative humidity: Up to 90% noncondensing at a temperature of 60° C (140° F) Electrical specifications Power supply Universal power adapter (external) Power requirements Input voltage: 100 to 240 VAC (± 10%), 50 to 60 Hz (± 3Hz) Output voltage: 32 Vdc, 1560 mA Power consumption 29.6 watts Acoustic emission specifications (print in Draft mode, noise levels per ISO 7779) Sound pressure (bystander position) LpAd 54 (dBA) Sound power LwAd 6.7 (BA) Acoustic emission specifications (print in Draft mode, noise levels per ISO 7779) 145
D Regulatory information This section contains the following topics: • FCC statement • Notice to users in Korea • VCCI (Class B) compliance statement for users in Japan • Notice to users in Japan about the power cord • Toxic and hazardous substance table • LED indicator statement • Regulatory information for wireless products • Regulatory model number • Declaration of conformity • Environmental product stewardship program • Third-party license agreements FCC statement 146 Regulatory information