HP LaserJet 9059 MFP User Manual

Set the default copy options
You can use the administration menu to establish default settings that apply to all copy jobs. If necessary,
you can override most settings for an individual job. After that job is complete, the device returns to the
default settings.
1.From the Home screen, scroll to and touch  Administration.
2. Touch  Default Job Options , and then touch Default Copy Options .
3. Several options are available. You can configure defaults for all options, or for only some options.
For...

Basic copy instructions
This section provides the basic instructions for copying.
Copy from the scanner glass
Use the scanner glass to make as many as 999 copies of small, lightweight media or heavy media. This
includes media such as receipts, newspaper clippings, photographs, old documents, worn documents,
and books.
Place original documents face-down on the glass. Align the corner of the original with the upper-left
corner of the glass.
To make copies by using the default copy options, use the numeric...

Adjust the copy settings
The device offers several features so you can optimize copied output. These features are all available
on the Copy screen.
The  Copy  screen consists of several pages. From the first page, touch  More Options to go to the next
page. Then touch the up or down arrow buttons to scroll to other pages.
For details about how to use an option, touch the option, and then touch the help (
) button in the upper-
right corner of the screen. The following table provides an overview of the...

Copy two-sided documents
Two-sided documents can be copied manually or automatically.
Copying two-sided documents manually
Copies resulting from this procedure are printed on one side, and need to be hand-collated.
1.Load the documents to be copied into the document feeder input tray with the first page facing
down, and with the top of the page leading into the document feeder.
2. Touch  Start Copy . The odd-numbered pages are copied and printed.
3. Remove the stack from the document feeder output tray...

4.Touch  2-sided original, 2-sided output .
5. Touch  OK.
6. Touch  Start Copy .
Make one-sided copies from two-sided documents 1.Load the documents to be copied into the document feeder with the first page facing down, and
with the top of the page leading.
2. On the control panel, touch  Copy.
3. Touch  Sides.
4. Touch  2-sided original, 1-sided output .
5. Touch  OK.
6. Touch  Start Copy .
ENWW Copy two-sided documents 121
 

Copy mixed-size originals
You can copy original documents that are printed on different sizes of paper as long as the sheets of
paper have one common dimension. For example, you could combine letter and legal sizes, or you could
combine A4 and A5 sizes.
1.Arrange the sheets in the original document so they all have the same width.
2. Place the sheets face-down into the document feeder, and adjust both paper guides against the
document.
3. From the Home screen, touch  Copy.
4. Touch  Original Size ....

Change the copy-collation setting
You can set the device to automatically collate multiple copies into sets. For example, if you are making
two copies of three pages and the automatic collation is on, the pages print in this order: 1,2,3,1,2,3. If
automatic collation is off, the pages print in this order: 1,1,2,2,3,3.
To use the automatic collation, the original document size must fit into the memory. If it does not, the
device makes only one copy and a message appears notifying you of the change. If...

Copy photos and books
Copy a photo 
NOTE:Photos should be copied from the flatbed scanner, not from the document feeder.
1.Lift the lid and place the photo on the flatbed scanner with the picture-side down and the upper-
left corner of the photo in the upper-left corner of the glass.
2. Gently close the lid.
3. Touch  Start Copy .
Copy a book 1.Place the book face down on the glass with the top edge toward the rear of the glass. Align the
book spine with the book icon 
 along the top edge of the glass....

Combine copy jobs by using Job Build
Use the Job Build feature to build a single copy job from multiple scans. You can use either the document
feeder or the scanner glass. The settings for the first scan are used for subsequent scans.
1.Touch  Copy.
2. Scroll to and touch  Job Build.
3. Touch  Job Build On .
4. Touch  OK.
5. If necessary, select the desired copy options.
6. Touch  Start Copy . After each page is scanned, the control panel prompts you for more pages.
7. If the job contains more pages,...

Cancel a copy job
To cancel the copy job that is currently running, touch Stop on the control panel. This pauses the device.
Then touch  Cancel Current Job.
NOTE:If you cancel a copy job, clear the document from the flatbed scanner or from the automatic
document feeder.
126 Chapter 8   Copy ENWW