HP LaserJet 9059 MFP User Manual

5 Connectivity
●USB connection
●
Auxiliary connection
●
Network configuration
ENWW 67
 

USB connection
This MFP supports a Type B Hi-speed USB 2.0 connection for printing.
Figure 5-1  USB connection
68 Chapter 5   Connectivity ENWW
 

Auxiliary connection
This MFP supports an auxiliary connection for paper handling output devices. The port is located on the
back of the MFP.
Figure 5-2  Auxiliary connection
1Auxiliary connection port (Jetlink)
ENWW Auxiliary connection 69
 

Network configuration
You might need to configure certain network parameters on the device. You can configure these
parameters in the following locations:
●Installation software
● Device control panel
● Embedded Web server
● Management software (HP Web Jetadmin or HP LaserJet Utility for Macintosh)
NOTE:
For more information about using the embedded Web server, see Embedded Web server
on page 148
For more information on supported networks and network configuration tools, see the  HP Jetdirect Print...

6.Touch  IPV4 Settings .
7. Touch  Config Method .
8. Touch  Manual .
9. Touch  Save.
10. Touch  Manual Settings .
11. Touch  IP Address .
12. Touch the IP Address text box.
13. Use the touchscreen keypad to type the IP address.
14. Touch  OK.
15. Touch  Save.
Set the subnet mask
1.Scroll to and touch  Administration.
2. Scroll to and touch  Initial Setup.
3. Touch  Networking and I/O .
4. Touch  Embedded Jetdirect .
5. Touch  TCP/IP .
6. Touch  IPV4 Settings .
7. Touch  Config Method .
8. Touch  Manual...

5.Touch  TCP/IP .
6. Touch  IPV4 Settings.
7. Touch  Config Method .
8. Touch  Manual .
9. Touch  Save.
10. Touch  Manual Settings .
11. Touch  Default Gateway .
12. Touch the Default Gateway text box.
13. Use the touchscreen keyboard to type the default gateway.
14. Touch  OK.
15. Touch  Save.
Configure TCP/IPv6 parameters
For information about configuring the device for a TCP/IPv6 network, see the  HP Jetdirect Print Server
Administrators Guide .
Disable network protocols (optional)
By factory default,...

Disable AppleTalk
1.Scroll to and touch  Administration.
2. Scroll to and touch  Initial Setup.
3. Touch  Networking and I/O .
4. Touch  Embedded Jetdirect .
5. Touch  AppleTalk .
6. Touch  Enable .
7. Touch  Off.
8. Touch  Save.
Disable DLC/LLC
1.Scroll to and touch  Administration.
2. Scroll to and touch  Initial Setup.
3. Touch  Networking and I/O .
4. Touch  Embedded Jetdirect .
5. Touch  DLC/LLC .
6. Touch  Enable .
7. Touch  Off.
8. Touch  Save.
HP Jetdirect EIO print servers
HP Jetdirect print...

74 Chapter 5   ConnectivityENWW
 

6 Paper and print media
●Understand paper and print media use
●
Supported paper and print media sizes
●
Custom paper sizes
●
Special paper or print media guidelines
●
Load paper and print media
●
Configure trays
●
Select the output bin
ENWW 75
 

Understand paper and print media use
This product supports a variety of paper and other print media in accordance with the guidelines in this
user guide. Paper or print media that does not meet these guidelines might cause the following problems:
●Poor print quality
● Increased jams
● Premature wear on the product, requiring repair
For best results, use only HP-brand paper and print media designed for laserjets or multiuse. Do not
use paper or print media made for inkjet printers. Hewlett-Packard Company...